I can't pair my Bluetooth headphones, the iPhone 5 doesn't find the device. Can anyone help please?
I cant pair my Bluetooth headphones to my IPhone 5 the phone doesn't find thee vice. Can anyone help please?
Forget the pairing on iPhone and if possible the headphones ( see their user guide ) and start the pairing process again from "new"
Similar Messages
-
My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
Thank. SimonBrian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
Thanks, Simon -
I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
Thankyou- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I need to export a photo at around 1meg file size,and dont seem to be able to do it in the presets can anyone help please ,I shoot on a canon 5d
I believe Frank is referring to the end use (e.g., for print or on-screen use).
Until he returns, I can tell you that I ran a quick test using an image from the Aperture 3 training book library which was as follows:
Camera = Canon EOS 5D Mark II
Master resolution = 5616 x 3744 (21 MP)
I was able to export to a JPEG with end file size of 1 MB as follows:
Export Presets drop-down > select 'Edit' option
Selected preset name 'JPEG - 50% of Original Size' > change percentage value to 40% > change DPI value to '300' > click OK to set as current default > Export version to desktop.
The exported JPEG has a resolution of 2246 x 1498 and appears on screen to have the same image quality of the original in Aperture.
Note - I did not change the default Image Quality slider in the Export Preset dialog (which left it at 10).
Basically, you will need to play around with the settings until you find the appropriate values to arrive at an image version you want. -
Btinternet has changed since 21st Nov and it no longer works on the ipad. Can anyone help please?
Can anyone help please, btinternet have changed their servers on e mail since 21st Nov and I can no longer send or receive e mails. BT say set to the following but I cannot get it to work, any suggestions please.
Go to your iPhone/iPad home screen and tap Settings.
Scroll down to Mail, Contacts, Calendars.
Tap Add Account.
Scroll down and tap Other.
Tap Add Mail Account.
Put the name you want people to see when they get mail from you in the Name field.
Enter your BT Business username in the Address field. For example, [email protected] or, where you have registered a custom domain, [email protected]
Enter your BT Business password in the Password field.
In the Description field enter the name you want to use to identify the account.
Tap Next. If you get an error message at this point, tap OK.
Make sure that POP is selected at the top of the screen.
In the Incoming Mail Server section, change the Host Name to pop.outlook.com.
Scroll down to the Outgoing Mail Server section and change the Host Name to smtp.outlook.com.
Tap Save.Hello Kitty Galore,
It sounds like your your photos that you take on your phone are not showing in your iPad Photo Stream.
I would check both devices to make sure that they both have Photo Stream turned on in the iCloud settings.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
How do I turn on My Photo Stream?
After your devices are up-to-date and you have set up your iCloud account, it’s easy to turn on My Photo Stream on any of your devices:
iOS devices: Go to Settings > iCloud > Photos (Photo Stream in iOS 6), then turn on My Photo Stream.
Mac: Go to System Preferences > iCloud, then select the checkbox for Photo Stream. Click the Options button and verify that the My Photo Stream checkbox is selected. Open the application you want to use with Photo Stream (iPhoto or Aperture) and confirm that My Photo Stream is turned on in that application. You can also adjust your my Photo Stream settings in iPhoto or Aperture Preferences.
If it is enabled, then I would check to make sure Automatic Upload is enabled with this article:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
I imported photos to iPhoto or Aperture from my camera, but I do not see them uploaded to the My Photo Stream album, though the service is enabled.
In iPhoto or Aperture, navigate to Preferences > Photo Stream. Ensure that Automatic Upload is enabled under My Photo Stream and that you have an active Wi-Fi or Ethernet connection.
If Automatic Upload is not enabled, you can either enable it and import again, or manually add the newly imported photos to My Photo Stream in iPhoto or Aperture by dragging them into the My Photo Stream album in your Library.
Cheers,
Sterling -
How can I edit my website from another computer? and how can I create a new website next to the one, I already have? Can anyone help, please?
Move the domain.sites file from one computer to the other.
The file is located under User/Library/Application Support/iWeb/domain.sites. Move this file to the same location on the other computer and double click and iWeb will open it. Remember, it is your User Library that you want and not your System Library, as you will not find iWeb there.
Just create a new site on the same domain file and it will appear below the other site. If you want them side by side then duplicate your domain file and have one site per a domain file and they can then be side by side. -
Hi All,
My hard drive crashed and is no longer usable. I just installed a new drive however, I am not finding any way to export my recorded CD's from the Ipod touch to the new hard drive. Can anyone help please? I thought by enabling syc with Ipod woudl do it but to no avail.
ThanksI used a 3rd party program called copytrans http://www.copytrans.net/ that is not free to move my library from my ipod to my itunes library when I had to start from scratch. After that happened I started backing up my music that purchased from the itunes store to a dvd so I would always have it if things went south. Now I always backup my purchased digital music to an optical disc just in case plus everythng else I have is on retail cd's so I can just rebuild my library from scratch again if I have to. You should also regularly back up your itunes media folder to another disc so your entire library will be backed up just in case you should lose your program drive.
-
When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.
I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.
-
I am trying to send an email to a group which I have created in my contacts. I would like to hide the list of email addresses but cannot see how to do this. Can anyone help please?
Thank you for your message.
I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it).... -
Hi All, I have the latest version of iTunes, however since upgrading I can no longer get iTunes to recognise that any devices (iPhone / iPad) are connected? Can anyone help please. Paul
Try holding down CTRL as you launch iTunes to see if it will repair the drivers.
Or try Cerbu's post here.
Or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
Please let us know which approach works for you...
tt2 -
My iMac goes to disc utilities on startup, repair disk doesn't cure it and I can't reinstall Mountain Lion because I don't remember my ID and password at the time I bought the software the system isn't accepting my current details and Apple isn't recognising the answers to my security questions. They don't even seem to have my correc date of birth so I can't progress the reinstallation. I'm currently abroad and have my iMac with me but with no way of contacting Apple that I can find, I'm at a loss and very reluctant to pay £35 to try and get my ID and pasword sorted out given that their system recognises my current details. can anyone help please?
AGwhen they gifted me the mountain Lion software several years ago.
Mountain Lion was introduced in July 2012. Did the people who gifted you possibly use their Apple ID for the purchase of your OS? If you used your own Apple ID, you should have simply used the one you use for all things app store. The problem with any purchase at the app store is: whatever Apple ID was used to purchase, it willl stay tied to that Apple ID forever. And, purchases from the app store are not transferable.
So, you can check with the person(s) who gifted you or spend $20 to buy it - or, if your hardware is compatible with the new OS Mavericks, you could download it and associate it with your Apple ID.
FWIW, according to the licensing agreement, the OS remains the property of Apple and you are only granted a license to run it. -
I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?
U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
I have downloaded the adobe student suite and whenever I open any of the adobe applications my laptop is incredibly slow, I cannot use any other application at the same time and often have to force quit. I have taken all my files off my laptop and added to my external hardrive. Can anyone help please?
What about other non-Adobe programs on the machine - do they also run slowly?
What are your system specifications? How do they match up to the system requirements for the software? -
Can anyone help please with this download error?
Is this on Wi-Fi or Cellular data?
What happens when you switch from one to the other?
Has the device been restarted?
What about Settings > General > Reset > Reset Network Settings?
Maybe you are looking for
-
Conversion of a specific format with Audition
Hello I'm in love with Audition 3 because it meets my pc requirement, while as CS 5.5 want a lil big pc requirement but any ways here is my real question how can i convert an Audio file in following fomrat using Audition Uploaded file should be wave
-
Help...skip logic has made my form unfillable...why?
Some of the selected features are not available for PDF forms You have selected the following features for your form that will not be functional in the PDF form: - Skip Logic Rules (all content will be shown)
-
How do Virtual Applications get published in SCCM 2012
SCCM 2012 Virtrual applications are deployed, icons appear on desktop and appear to be installed according to the Application Management Client console. However the SCCM2012 AppDiscovery.log states "Required component is not published". We are run
-
I am really unclear on the "Rome Web Sites." If I want to publish some of my stuff online in a Rome Web site, how can I structure it? Can it be more than one page? Can I add to it later? I would love to have a portfolio of stuff I've made in Rome
-
We have a WLC 5500 apliance, but i have a problem, the APs have a administrative IP in a diferent segment, only conected to WLC the AP have same segment of the management interface, the 5500 don´t have APmanager interface. How configurate the WLC to