I can't pass the parental control on apple tv
Hi there, I took the time to set my apple tvs but I can't pass the parental control, it shows 0000, and I have tried everything, I didn't set one yet, and everytime said that the passcode is incorrect
what can I do?
You'll need to reset the Apple TV to original settings and configure it again.
Similar Messages
-
I made my administrator account a parental control account, at the time of creating it, the system asked for my administrator password, to restart the computer, and the new account was created. When I accessed that account at the parental control menu I could see my main account on the list and i deleted the account from that list, and now i'm trying to get back to it but I'm not able to because every time i restart the computer brings me back to the account I created. I searched for help on the web and it says to go to users and select the account I want to restore but I can't do it. Please help.
User account – restore missing admin
-
How can i pass the Input value to the sql file in the korn shell ??
Hi,
How can i pass the Input value to the sql file in the korn shell ??
I have to pass the 4 different values to the sql file and each time i pass the value it has to generate the txt file for that value like wise it has to generate the 4 files at each run.
can any one help me out.
RajaCan you please more elaberate., perhaps you should more elaberate.
sqlplus is a program. you start it from the korn shell. when it's finished, processing control returns to the korn shell. the korn shell and sqlplus do not communicate back and forth.
so "spool the output from .sql file to some txt file from k shell, while passing the input parameters to the sql file from korn shell" makes no sense. -
The time limits in the parental controls do not work. I have several mac systems and they do not work on all of them. Also, I have had this problem since at least snow leopard and it is very frustrating that Apple is unable to fix a simple issue like this. All they have to do is somehow 'hard-wire' the time limits to the system clock but they are not listening. I used the feed-back feature in their support webpage and hopefully everybody else experiencing this issue will too. Thus, if they get a thousand notes on this issue they might listen and finally fix it.
Well, the whole system with those time limits are funky. Sometime this happens, sometime that happens. When the user is on the bed time limits do not work nor do the length of time limits. It is very frustrating as one of the reasons I bought an apple in the first place was those parental controls which did not exist in Windows prior to Windows 7. I do have a Windows 7 machine now and the bed time limits work there. Maybe you have a Windows 7 machine as well and can let them use it.
-
I used the parental controls and now safari won't appear on the children's desktop.
Can anybody help please?? I created a separate user account for my children so I could control their time on the computer as well as what websites they visit and now when they log in, Safari is not present on their dashboard nor can they access the internet. Anybody have any ideas?
Thanks.Sharon...
Possibly a restriction causing this...
Read here > Mac OS X v10.5, 10.6: About the Parental Controls Internet content filter -
Hi, how to pass the input control from 1 report to another report please reply me ...
HI Stefen,
That feature is not yet provided .
But you can achieve if you ahve that kind of requirement using the reportfilter summary options.
please check if it can help you
User input control for more than one tab in webI -
Why don't the parental controls on the mac pro work? I have the settings correct.
Why don't the parental controls work on the mac pro?
I am set as the administrator able to make changes and one day my daughter was set as the administrator. I did not make the change.
How old is your daughter?
Is it possible she has seen you type your password, and given herself admin rights? Or used your user_id when you stepped away from the computer?
If so, you will need to do one or more of:
a) change your password. This leaves you open to having her watch and take the new password. You can also "require password after nnn minutes of screensaver" in System Preferences > Security
b) add a new Admin with a new password. use it ONLY for Administration. Log in to it and demote your own Account to a non-Admin. Then go back to your own account, which cannot be used to add privileges. When you want to install something, you will type the Admin username and password.
c) have a deeply serious discussion about building TRUST and giving her increasing responsibilities toward becoming a free-standing responsible adult.
NB> Remember that pørn, while it may be repugnant, is not the "real" enemy on the Internet. The real enemy is unsupervised CHAT. Pørn will not arrange to meet your child after school. -
Can you disable wifi - parental control
I'd like to turn off the wifi on an itouch so that my son can't surf the web.
My understanding is that there isn't any parental controls on the itouch. Is there a way to remove a physical component so that wifi doesn't work?
other ideas?
I can keep him from accessing wifi at home via the firewall, but not at school or any retail store that offers wifi.I am outraged to see how careless you are. We, parents of those "spoiled rugrats" have trusted Apple wouldn't release such a product that does and has everything else but parental control.
Apple uses its capacity of hard core marketing but doesn't take responsibility for the consumers it creates. Yes, we can tust our kids with a $400 gadget but we also know their brains are a little soft. The web is the world they can discover with the touch of a fingertip but it's also a place for shady minds just waiting to exploit them. I don't want my kid searching Google and ending up on a **** site.
You are right, I'm going to return that senseless gadget to the store.
As for me, I don't and I will never buy an ipod, I am mature enough for not being trapped by Apple's claws but I have a kid that still depends on such small things. And you know we all went through that fase.
The least Apple should do is disclose at the moment of purchase that there's no parental control and honestly it hadn't crossed my mind that it didn't have any.
P.S - I was previewing my message and the word referring to a site with se... content was blocked! How interesting! -
I tried to disable the parental control for the administrator, but after reboot, the parental control is still enabled for administrator.
1st option
Try to log on on an another admin account on your Machine and change that.
2nd option
if there is no other admin you have to create a new user as an admin.
Reboot. When the screen goes black hold "command- s" to enter in Single user mode
type /sbin mount -uw /
its /sbin(space)mount(space)-uw(space)/
then enter
type rm /var/db/.AppleSetupDone
its rm(space)/var/db/.AppleSetupDone
enter
Type Reboot
enter
The system, will restart with like setting up a new machine (dont worry your user files are not deleted)
set up a new account. then after that check teh user accounts on system prefrences. remove managed and boot on to your pervious user.
After managing to make your Previous usre an admin delete the other extra user that you created
Try to enable firmware password so that you can only do that to your machine. http://support.apple.com/kb/HT1352
Turn on Filevault to protect your files. http://support.apple.com/kb/PH7033 -
Does upgrading to iOS 4.2 reset the Parent Control password?
A month or two ago, I updated my son's iPod Touch 3G from version 4.1 to version 4.2 via my computer (not his).
Sometime later, I discovered that my son had set the Parent Control password to something completely different, and all of the parent controls had been turned off.
My son claims that the update had reset the password, and he set it to a different password, which he did give to me when I discovered the change. (I won't go into his excuse for setting a new password.)
I am suspicious. I have not found any evidence on the web of parent controls being reset by an upgrade, and I think it would be poor design to have an upgrade reset the parent control password.
So, if you upgrade an iPod Touch on a computer which is not its primary computer, does the password and parent control settings get reset?
Further info:
When upgrading his iPod Touch, I did not sync it to my computer. After the upgrade, all his settings (Mail, apps, etc.) were still working. I have my own iPod Touch that I do sync to my computer, and it has no parent control settings enabled, nor a parental control password. I keep my iPod Touch at version 3.1.3, for development purposes. I'm running 10.6.5, iTunes 10.
Please answer only if you know (e.g., you've tested this) or if you have a conjecture as to why this might indeed happen. I'm not in the mood for any parenting lessons.
Thanks!
HenryYou are absolutely correct. A simply update to the latest version of iOS will not restore the device to factory settings. If you did the update yourself, at the end of the installation you would have been presented with an option to restore from backup or setup as a new device. Of course you would have chosen to restore from backup because you say that all email and apps were exactly as before. The restrictions are carried over exactly as before when you restore from backup, including the restrictions passcode and any settings you had selected.
The only conclusion (if the sequence above is correct) that can be made is that someone intentionally restored the device to factory settings after the upgrade and then setup a new restrictions passcode.
Having said that, these statements in your description are contradicting each other:
- I updated my son's iPod Touch 3G from version 4.1 to version 4.2 via my computer (not his).
- When upgrading his iPod Touch, I did not sync it to my computer
How exactly the upgrade happened could tell you if you made a simple mistake or if he or someone else intentionally restored the device. -
The parental control function on my Verizon MI424WR Router does not work
I created few rules on the Parental Control section of my MI424WR Router admin page but it still allows internet access.
Does this router completely shut down the internet access, lets say if I set it 10pm-12am Disable connection? I read someone's comment on another post, MI424WR is actually cuts down the bandwidth into 1/2, but not completely shut down the connection. Is this true? If so this is useless....Parental controls can block all access. The bandwidth reduction info is wrong.
-
How can I pass the photos from one iphone to another?
how can I pass the photos from one iphone to another?
Use the Beaming feature. See the info at the ? In iPhoto for iOS.
-
How can we pass the select-option value to modulepool program?
hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
How i get select-option values to PAI of call screen for getting the data from database table to my internal table?Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu -
How can I pass the value to another frame?
Hi all,
The following is part of my coding of a frame. Once i click on the jButton2, the selected value will be stored into a variable named NAME and the value will be displayed by a label in same frame. At the same time, a new frame named TESTING3 will be set to visible.
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt)
// TODO add your handling code here:
String name = (String)jList1.getSelectedValue();
jLabel1.setText(name); //display the value in a label in same frame
new testing3().setVisible(true); //a new frame set to visible
} Question: How can I pass the value to TESTING3 frame and display it on that frame?
Thanks,
ning.just make an archive that save that variable and them get them from de clase were you save it
public class sav {
String n;
public sav {
n="";
public void addn(String x){
n=x;
public String shown(){
return n;
and them save it from the frame
sav sun = new sav();
sav.addn(f);
them call it from the other frame
sav sin = new sav();
String s = sin.shown();
label.setText(s);
and i think thats you want to do if its not please explain me better
bye -
How can i pass the value one from to another form?
hi all
how can i pass the value one from to another form with out use it when ever i want to needed this value that ican useit?
like i have two fields U_test1 and U_test2 table name @AUSR
that i have four form A! , A2,A3,A4 please tell me in details....?Hi,
U can assign the values to some variables and access then in ur required forms.
Vasu Natari.
Maybe you are looking for
-
ITunes crashes on start up since installed Ace Media CodecS pack
First post and if truth to be told iv never had to use the support forums at Apple before because everything normally goes swimmingly well. But now im in dire need of assistance Basically, I did one of the most silliest things I could have done and i
-
How to release the budget in SAP Funds Management
Hi How to release the budget in SAP Funds Management. Please let me know the proceedure and the transaction code Tks
-
How to remove the a report from Transport
Hi Have CR in transport and the CR contains many reports. a) If i want to remove one report from that, plese tell wht are the steps do i need to follow. b) if i want to remove entire transport request,Plese tell how to remove the transport c) also
-
Ridiculously tiny find previous/find next buttons in Reader
Not only are the new find buttons far too small to easily target with a mouse pointer: ... but the F3 and shift-F3 keyboard shortcuts do absolutely nothing. (Reader 9.4, Firefox 9.0.1). I know it's a bit late to ask Adobe to stop "fixing" thiings i
-
THank you