I can't "ping" but I see the computers in the same network while trying RDA server. What I am doing wrong?

Hi, I would like to know if anyone can help me. It's probably easy but.... The thing is that I have a little network with 5 computers. The network is working perfectly, I mean I can "see" whole the network from all the computers and I can share files and so on. My surprise is that I have tried to make a "ping" between all of them and I didn't recive any answer. I am trying to install the Remote Device Access Server to share a DAQ device in all the network. Oviously when I try to see my DAQ device from the "client" computer appears an error message <<No system found at adress...>>. Any idea...?
Thanks.
d.

Firewall settings?
Also, about PING, the PING service may be down
Paolo
Paolo
LV 7.0, 7.1, 8.0.1, 2011

Similar Messages

HT5313 .tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?

dsharp14 wrote:
tried to install lion 10.7, tell me can't install on this drive----but it's the boot drive that boots this computer, what am I doing wrong?
What are the specs on your Mac? Top Left Apple Symbol > About This Mac > More Info > Hardware Overview
Thanks
Pete

Hi, I requested an unlock from T-mobile UK 1.5M ago, and after a restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. What am I doing wrong?

Hi everybody, I need help.
I requested an unlock from T-mobile UK 1.5M ago, and after the restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. And it still doesn't support nay other SIM. What am I doing wrong? How do I get it unlocked?
Thanks in advance for advice

Did you restore the phone as a new device when you did the restore/unlock, or did you restore it from an existing backup? I have found that when unlocking an iPhone on the AT&T network, you don't get the message that the unlock was successful if you don't restore as a new device. The unlock still works, you just don't get the message. Perhaps it is not carrier specific for this behavior.

I purchased creative lightroom presets. I see the zip file in my download file and I try to import to LR but it just keeps creating a bundle never giving me the option to import (greyed out). What am I doing wrong?

I purchased creative lightroom presets. I see the zip file in my download file and I try to import to LR but it just keeps creating a bundle never giving me the option to import (greyed out). What am I doing wrong?

Try unzipping the file first. I have no idea regarding your level of technical expertise so advanced apologies if this is really basic. A ZIP file is a compressed file containing one of more files within it. To access the files you will need to expand it. If you double-click on it first, it should open up for you. If it does not automatically expand, you can select the files and copy them to a new folder. The copy will unload them into an uncompressed form. Once they have been uncompressed, you should be able to import them.
If the import is still giving you problems, go to your Preferences, click on the Presets tab and click the Show Presets Folder button. You can then copy your purchased presets into the folder shown. You will want to copy them to the User Presets subfolder.

We are using apple tv to try to access our itunes account on the computer. We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store. Any ideas on what we are doing wrong?

We are using apple tv to try to access our itunes account on the computer. We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store. Any ideas on what we are doing wrong?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

How can i stop user to get the same screen while entering same T code

hi experts,
how can i stop user to get the same screen while entering same T code (_Means i want user enter same t code but got different different screen how it is possible.)_
i want to know how can we set a authorization is such a manner ...
Through different different login id user got different different screen while entering same T-code.
for example if there is two functional login id mum & noida...
then user login through that and
enter any same functional tcode (for getting purchase order)
but get different different window...so how come it is possible.....
plz explain in brief
thanks in advance...plz do reply as soon as possible

For a custom transaction this is easy, you need to ask your developers to be able to direct users to different screens based on the results of an authorisation check. You could have an auth field e.g. ZSCREEN which is checked in the program & decides what screen the user has access to.
For standard transactions, unless already coded, I would forget it & do what is recommended by Subramaniam and create transaction variants as required. Assign each variant to a custom t-code and users access it that way.
What I am interested is is why do you want to do this?

I have been trying to download photos. It keeps saying can't create file, please check permissions on destination folder. Ihave made sure I have set the permissions on read and write. What am I doing wrong?

I have been trying to download photos too my MAC. It keeps saying can't create file, please check permissions on destination folder. Ihave made sure I have set the permissions on read and write. What am I doing wrong?

Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer

Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account. Please help me and tell me what I am doing wrong.

Help....I am trying to set up iClould on my pc....the set up was complete....when I try to sign in to set up it says the Apple ID is valid but is not an iCloud account. Please help me and tell me what I am doing wrong. Thx

Hi DesCoop,
You must initiallly activate iCloud from an IOS device or a Mac. You cannot inititally activated from a PC.
Sorry.
GB

I bught a new Time Capsule 2Tb. I connected it to my internet router. I manege to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

After I make a trailer or movie on my Iphone 4S and try to save it to the camera roll, I get a message that "an error occurred during export". The message appears after the piece has seeminly finished exporting. What am I doing wrong???

After I make a trailer or movie on my Iphone 4S using IMovie and try to save it to the camera roll, I get the message "An error occurred during export." The message appears after the piece has seemingly finished exporting. What am I doing wrong????

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

What version of OS X do you have? Messages requires 10.8. Previously it was iChat (but does not have iMessage capability to send texts to an iOS device).
Matt

Real newbie-I can hear my loops in my library, but when I drag them to a track, there is no audio. What am I doing wrong?

Real newbie question-I can hear the loops in my library, but when I drag them to a track, there is no audio when I playback or record. What am I doing wrong?

You probably put Midi loops (green) on audio tracks, and audio loops (blue) on Midi tracks.
That won´t play.
JanD

Home sharing is on, but library does not show up under sharing. Turned off then on again and home sharing shows up and the disappears when I click done. What am I doing wrong???

Home sharing can't connect on my computer. It will recognize a library on one computer but not another. Tried turning it off and then on and got nothing. Tried switching to a different apple I'd and got nothing. I have the latest version of I tunes. What am I missing? What am I doing wrong? Can anyone help?

Are you connected to the same SSID network?
to make things a little more easy, i'd perfer to have all my itunes on a network drive for all pc's connected to one itunes and scratch the home sharing itunes to view under another itunes.
Only problem im having is that wrong pictures are showing up for movie/tv show connecting to different computers conecting to one itunes library.
Home Sharing on iPods show wrong pics

How can I connect two macs in the same network?

Both are connected to the same network. One via ethernet and the other via Wifi (Airport Extreme). Both share the same Internet conection. I have followed instructions for files sharing. I can access only the computer linked to my home network via ethernet, but not the other way. It does not found the server address provided in file sharing by the computer conected via Wifi. Any clue? Can it be that the IP address of the Wifi conected is DCHP?

Are you using Connect to Server or Shared sidebar in the Finder? What OS X versions do the two machines run?

I can't "ping" but I see the computers in the same network while trying RDA server. What I am doing wrong?

Similar Messages

Maybe you are looking for