I can't post goods issue for the outbound delivery

I select the indicator of GI via delivery in transport block via TCODE OPKP and assign the production profile to the work schedule view of the material master.then I create a production order for the material and release it.I do the wm material staging for the producion order via TCODE LP10,An outbound delivery was created automatically and the movement type is 261.then I pick for the delivery and confirm the transfer order.When I do the post goods issue there is a error message .
E M7 226
Update control of movement type incorrect (entry 261 X X _ _ _ V )
then I see the onlinehelp,I find the configurations are ok.
the content is following in table t345.
werks supply area material staging indicaor
1000 PVB 1310WM 1 1 wmpp 10000

Please kindly refer to the attached notes below :
523509 FAQ: Control tables (no Customizing)
161729 M7226 with KZVBR=V
Hope this helps.

Similar Messages

Idoc to post goods issue against an outbound delivery

We happened to simulate both the idocs 'WPUWBW01' and 'MBGMCR02' for posting goods issue for an outbound delivery but failed.
Request you people to help us on this. Is there another idoc that we have to use to post GI... if so please let us know... and if we are using the right one, guess we are not executing it in the right way... in such a case please guide us with the steps...
Thanks
Arun
We got hold of the Idoc type 'DELVRY03 PGI SHPCON' we are able to post the Idoc but we are able to do the packing only or we are able to change the deliveries but the PGI is not happening..
please help us on this.. is there some condig that updates the delivery with the PGi or is there something else do be done in the Idoc....
will provide additional details if required.
Thanks

Hi Arun,
There are no configuration settings in this. It is development that your abaper need to carry out.
Explain to him that this is the func module. And intrun it has to either trigger a BDC or BAPI for creating packing and PGI.
He should then do the recording of that and will assign the program pertaining to BDC with in the function module.
One more suggestion is to put the same query in ABAP section too. U will definitely get a positive response.
Hope this helps.
Kind Regards
Chakradhar

Error while posting Goods issue for the reservation

Hi,
I am getting an error while trying to post the Goods Isuue for the reservation using MIGO transaction. The error is 'Level AR belongs to cash position (source symbol PSK)'.
Please help me in solving this if anyone has any idea, let me know what am I supposed to do.
Regards,
Lavanya.

Hi
I think Cash Management (TR-CM) module implemented in your system.Please post this in Finance forum.
Regards
Ramakrishna

Post goods issue at the time of complete shipment

Hi Experts,
Please let me know the configuration steps to do post goods issue in the complete shipment. Appreciate your help.
Thanks.
with regards,
Muthu.

Dear Muthu,
Please go through this IMG path then do the configuration settings.
SPRO>Logistics Execution>Transaportation>Shipments>Define and Assign activity profiles, here you maintain variant name in the At completion colomun select your shipment document then click on Maintain push buton now system will take you to the maintain variant screen in that screen you can find the tab Post goods issue for the deliveries of shipment under this tab you put radio button for carry out goods issue posting during save, then save the variant.
Now you create shipment document while saving the shipment document PGI will carry out for the deliveries which are avail in that shipment document.
If you more details go through this link it will help you,
http://help.sap.com/saphelp_47x200/helpdata/en/3d/42aa07074f11d2bf5d0000e8a7386f/frameset.htm
I hope it will help you,
Regards,
Murali.

Post Goods Issue for movement type 351

Hi experts,
I need to perform a post goods issue for the movement type 351.
which bapi we need to use? is it going to be "BAPI_GOODSMVT_CREATE" or something else.
What are the information that we require other than movement type for performing post goods isue?
Any pointers on this will be highly appreciated.
Regards,
Sajith

Hi ,
Thanks man.. Then where should I do that.
Idoc is PORDCR102. Message type is PORDCR1.
My requirement is to create a STO first in the user exit EXIT_SAPL2012_001 and then to perform a Post goods issue in the user exit EXIT_SAPL2012_003.
Can u please explain it.
Regards,
Sajith

How to post good receipt for an inbound delivery with HU in the stock?

Hello,
We have an inbound delivery of a purchase order with 10 Handling Units inside on.
The HU's has been put in a storage bin (by transport order + confirmation) before a good receipt has been posted for the whole delivery.
Due to this it's not possible to post good receipt for the inbound delivery, and the available stock quantity is in minus on zone: '902-GR Area External Rcpts' since the handling units are already in a storage bin.
Can anyone help me on this matter?
Thanks

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Posting multiple goods issues against the same delivery

Hello gurus,
We are a fashion apparel company using ECC 6.0 and would like to know if it is possible to post mutliple goods issues against the same delivery?
I will explain the business requirement.
- We create a stock transport order to deliver 400 units of merchandise to on or our retail stores (STO is created and processed to a delivery).
- This information is passed down to our warehouse management system (which is not SAP)
- Our warehouse management system has the ability to split a delivery into multiple shipment when needed. For example, our warehouse may only be able to complete 250 units for our morning shipment and will therefore pick, pack and post this. This will feed back into SAP and process a 641 movement so that the units now show as "in transit". This is needed so that our stores can process the ASN and move the units into their inventory when they receive the merchandise later that day.
- During the afternoon, our warehouse will process the remaining 150 units and will ship this to our store later in the evening or next day.
Currently, we are not able to process another goods issue against a delivery as we close out the delivery during the first goods issue. We would prefer not to have to generate a new delivery for our DC and let them continue to process against the same delivery, but we are unsure how to configure this.
Any help or guideance would be extremely appreciated
Thanks in advance

Hi RJ,
First of all sorry to write such a lengthy reply,In one line if i want to summerize then it is not possible with standard SAP however we can achieve this by writing some piece of code in both the system
AS - IS
               Business process
          From business process point of view you are right that once the pick & pack is in process it is not advisable to create a new delivery document for balance quantity and share the same with WMS as then they have to create a new document in WMS and start picking based on that rather then the old delivery document number. if i am in your position then i can give a thought like this
e.g.
Delivery                                                  - 100 Unit
Shipment confirmation from WMS            -   60 Unit
Change in delievry quanity / Pick qty        -   60 Unit
Invoice from SAP                                    -   60 Unit
Second confirmation from WMS                          -   40 Unit
Change in the existing delivery quantity                -   Now here we have two option either
1) Change the delivery quantity / Pick qty to (60+40) =100 or
2) Remove the 60 and update 40 as delivery and pick quantity
Pros & Cons
if you will select option 1 then furhter invoice will happen for 100 unit which is incorrect as physically you are shipping only 40 unit
if you are selecting option 2 then the document flow is incorrect as you don't have history(in SAP) for the 60 unit which was shipped earlier
Solution ::
so in my opinion the best option is to create a seperate delivery document (store the old delviery number in one of the field of the new delivery and pass the same to custom segment of the IDoc) transmit the IDoc to WMS write the validation logic in WMS
Find the record with old deliver number in the WMS system, check the status whether it is active or inactive
if it is acitive Validate the Material + qty with the WMS record(Material + balance quantity) if both are same then pass the new deliery number to custom field of the WMS table
At the time of confirming back to the SAP, Write a piece of code in SAP that if the incoming idoc custom field(new delivery number) field is populated then ignore the orignal document number and post the document using the new delivery document number
Hope this help

Post a good issue against an outbound delivery with movement type 601 K

Hello,
according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
In particular I've tried in two different ways:
- setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
- to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
Can you suggest me how the system has to be setup in order to cover my requirements?
Thanks in advance,
Alessandro

Hi,
Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master. Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you.

Can not "post goods issue" against Vendor Return PO.

Hello Friends,
**I have a problem During the "Vendor Return Through Purchase Order" Process.I crated a PO with return flag set.**
**Then 1) Created a outbound delivery against purchase order (VL10B)**
2) Created a Billing (VF01)**
3) Next is VL02N - While doing the "post goods issue" where i got following error message "Update control of movement type is incorrect (entry 161 X X _ L)"**
Its shows setting related to Mvt 161 to update .I check allowed transaction with respect to 161....VL02N is there .....But don't understand what change needed in "Update control /WM movement type is needed.....Pls suggest any solution........Thanx**
Regards
Sachin
*Error Messafe -
Update control of movement type is incorrect (entry 161 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 161 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi Antony,
Thanx for reply.
1) I had assign delivery Type (RL -Returns Purchase order) to my document type. Assingnment of delivery type thru
spro>MM->purchasing>purchase order->set up stock transport order--->assign delivery type and checking rule....
2) MvT - 161----If i modify 161 wrt to GR Returns what modification is needed ? ......
3) VOV6 - I had checked it ,maintain it, but that is not relavant in my case....
4) During PGI system pick 161 as defalult MvT.....can we change it t0 122 ? but how...??
still the problem is there......
Sachin

Post Goods Issue for Outbound delivery return

Hi, I'm trying to Post a Goods Issue for a returned outbound delivery but I cannot find a function module to do this, I tried using SD_DELIVERY_UPDATE_PICKING but its creating the material against the outbound delivery with status archived, which means it wasn't created.
I also tried using the MB_CREATE_GOODS_MOVEMENT, but this one is creating the material document but not updating the status and the document flow of the delivery.
Thanks,
Pablo

Hi Lopez,
Post Goods Issue with MB_CREATE_GOODS_MOVEMENT FM in VL02N
Regards,
Sravanthi

Problem with post goods issue in SD std. delivery

hi
while doing post goods issue of a delivery in VL01n its showing run time error. the error message is gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
if there is any configuration step for post goods issue in SD thn plz mention it.
Plz help..

Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera

Not able to post goods issue in case of delivery against a repair order

A faulty part was received from customer and repaired and further it has to be sent to customer. Then delivery has been created. Also handling unit has been assigned. Now at the time of post goods issue, following error is appeared.
"Deficit of sales order stock".
When I checked with transaction MMBE, I don't find any stock assigned to this order.

Hi Atul
Please ensure that the settings is as per the followign link
http://help.sap.com/saphelp_47x200/helpdata/en/00/044f350bea3278e10000009b38f839/frameset.htm
Thanks
G. Lakshmipathi

Can create twice billing document for the same delivery in STO

Hi experts,
I donot have problems in Standard Sales order when I create billing doc via VF01. When I try to create another billing doc in VF01 for the same delivery it says error, as the item is already invoiced.
This is correct.
But while creating invoice for STO order, system allows me to create more than 1 billing document for the same delivery. If we accidentally or purposefully create it allows to create many.
Could you let me know where in SPRO (IMG) I can control this?
Thanks,
Pri

Hi
STO billing if it is intercompany STO followed by IV billing type you can create only once
No special settings reqd to achieve this as you bill (IV billing type) the delivery the first time, the delivery status gets completed
If Intracompany, the billing type is proforma invoice F8 and this can be created as many times as you wish as proforma doesnot update accounting
if your issue is this
Even this also if you want to restrict only once then try with copying requirenments 311 at item level (i hope standard item category NLN is used) in VTFL between header NL to F8
Regards
Raja

How movement type 641 E can post goods issue for sales order

Hi
One of our sales process need sales goods cross plant, form sales order type OR(the item required special stock E) to create delivery then auto generate PR , form PR create Stock Transprot Order, in vl10b generate delivery type is NL, when PGI this NL delivery, the message said 'Sales order stock 30001057 000010 does not exist' .
I check the NL delivery movement type is 641 E, normally, 641 would transprot the goods to 'in transfer', but I could not find the reason why it can't create sales order stock in 'in transport' .
Any suggestion about that?

Did you check whether stock is available for the particular material ?
Is the material extended to the relevent plant, storage location ?

Post goods issue for outbound delivery in previous month

Hi experts,
Pls help. Many thx.
Due to roll out, some stock need to be issued in previous month. It works fine except some deliveries. Those deliveries have been cancelled goods issue due to wrong posting date.
For e.g. the posting date in delivery should be April 1. Due to oversight, the date is entered as May 27. In VL09, the reverse date should be in May. Otherwise, the system disallows further.
Now, the problem comes up. When doing those deliveries again (even create new deliveries), the error message pops up "Deficit of SL Unrestr. prev. 350 KG : XX material XX plant XX storage location
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 350 KG.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing."

Hi Lakshmipathy,
I tried the same as you said but its throwing the error below:
GI for delivery 80014996 cannot be canceled for the following reasons:
Cancellation date 30.04.2009 is before the goods issue date 28.05.2009.
I don't have the any issues but i tried whether its working or not.
Kindly suggest...
Regards,
SK

I can't post goods issue for the outbound delivery

Similar Messages

Maybe you are looking for