I can't post to numbers community

I cannot post to the Numbers community.  It keeps telling me I "cannot create or edit content in this area".  WHAT?  How do I post a question, then?
Never mind.  Apparently, the "Select a Community" requires a change to the field, even if it already has "Numbers" set in it.  Now my real question has posted.

That's the post. On my end, all indications were that my posts could not be submitted. This hasn't been a good experience for me, either with the backups or the discussion forum.
Thanks stedman1; I need to take a break from all this and enjoy some fresh air without the smell of Apple in my flaring nostrils!

Similar Messages

  • Can't Find my Post to the Community

    Good afternoon,I created a new post & posted in the Dallas group & the Fort Worth group, but when I go to the main pages for these groups, I can't find my posts. The community page I was expecting to find my posts are:
    http://community.spiceworks.com/regional/dallas
    ..and...http://community.spiceworks.com/regional/fort-worthMy posts are located at:
    http://community.spiceworks.com/topic/1058357-starting-an-email-email-security-meetup-group...and...http://community.spiceworks.com/topic/1058356-starting-an-email-email-security-meetup-groupHow can I get these posts to show up on the Dallas & Fort Worth pages?
    Thanks!Brad Wyro
    This topic first appeared in the Spiceworks Community

    It's been moved to here https://community.bt.com/t5/Other-Broadband-Queries/Frustrated-with-help/m-p/1392945#M95993
    If you click on your username it will show all the posts that you have made.

  • TS4213 Why can't iPhoto, Pages, Numbers, Keynote and iMovie access my iTunes Library files and Pages, Numbers, Keynote and iMovie access my iPhoto Library files now that I upgraded to '11?

    Why can't iPhoto, Pages, Numbers, Keynote and iMovie access my iTunes Library files and Pages, Numbers, Keynote and iMovie access my iPhoto Library files now that I upgraded to '11?
    Examples of what is going on:
    1. In Pages, Numbers & Keynote, when I go to the media browser the Audio section reads "Open iTunes to populate this list" even after iTunes has been opened, .xml file has been replaced/repaired, etc  AND Photo section reads "Open iPhoto to see photos from your iPhoto Library in this list" even after iPhoto Library has been replaced and new default library created.
    2. In iMovie, similar thing ... when I go to add photos or music to a movie the iTunes files aren't present and the iPhoto photos are missing with similar messages as in #1.
    3. In iPhoto, similar thing ... when I go to add music to a slideshow it says to "Open iTunes to populate this list".
    It is shocking to me that Apple would let something as simple as a pathway link to associated library files get this messed up on an upgrade, but what's even more surprising is that with the number of people who seem to be having this particular issue (and I can tell from all the research that I've done for weeks online that there are a lot of them) that there doesn't seem to be a single clear answer to fixing it anywhere on these community support forums.  Most of what I've seen is rehashed advice from outdated issues.  What I need is a simple answer to how do we get these programs to look for the correct location of the photo and music files because I sure can't seem to find any logical place to do that through the programs' preferences files or the system preferences window?
    Any help would be greatly appreciated.
    P.S. Here's the details on the software/hardware:
    MacBook Pro
    Mac OS X
    Version 10.7.5
    2.4 GHz Intel Core 2 Duo
    8 GB 1067 MHz DDR3
    iTunes 11.0.4 (4)
    iPhoto '11 9.4.3 (720.91)
    iMovie '11 9.0.9 (1795)
    Keynote '09 5.3 (1170)
    Pages '09 4.3 (1048)
    Numbers '09 2.3 (554)

    I have the same problem on a new MacBook Pro. I have not been able to access the iTunes library from iPhoto since I got this computer. I looked in the Preferences file and deleted the com.apple.iApps.plist but there was no com.apple.iApps.lockfile so I just deleted the iAPPs.plist and rebooted the computer.  Still no iTunes available in iPhoto.
    All my music is in iTunes and plays. After reading the above I brought up Pages and I was able to access music and insert a track into a document.
    Do you have any suggestions.

  • I can no longer open numbers and am therefore barred from access to important accounts - what do i do next

    I can no longer open numbers and am therefore barred from access to important accounts.What do I do next?

    Hi mp,
    If you updated to OS X Mavericks, there may have been an automatic update to Numbers 3. Numbers 3 will be in your Applications folder. Numbers '09 has not been replaced. Look for Numbers '09 (Numbers 2.3) in a folder called iWork '09 inside your Applications folder. You can run both versions of Numbers at the same time.
    I have icons for both versions on my Dock. Drag each to the Dock from Applications folder and Applications > iWork '09 folder. Right click on each and Options > Keep in Dock. Now you have the choice of which to use.
    Numbers 2 (3 column chart) on the left. Numbers 3 (4 column chart) on the right.
    If a document won't open, try opening from within each version. Or right click on the document and Open With...
    You can Export a Numbers 3 document back to Numbers '09 with Menu > Export > Numbers '09...
    Post back if you have problems.
    Regards,
    Ian.

  • How can I get serial numbers or the free versions of Adobe, Air, Flash Player 14, and Reader XI Pro

    How can I get serial numbers or the free versions of Adobe, Air, Flash Player 14, and Reader XI Pro that I had installed on my computer before Microsoft crashed my computer and I had to do a fresh install? I finished reinstalling Win 8.1Pro on my computer thanks to Microsoft Lvl 1 Techies corrupting my Command Structure so nothing would work. I had recently taken a picture of my installed programs (control panel, uninstall programs list) so that I would be able to reinstall everything I needed. I can't seem to find an email for the Reader which I remember paying for, the others I believe were free installs. Can anyone help me out.

    Safari Version 5.0.5  <  from your first post
    5.0.5 is an outdated version of Safari.
    There is an update available for Safari for version 5.1.1
    That may help.
    Click your Apple menu icon top left in your screen the click Software Update
    Restart your Mac after the updates are installed.
    Try full screen ...
    If you have problems using Software Update from the menu you can use the standalone installer here >  Safari 5.1.1

  • How can I lock in numbers for use in a spreadsheet ap?

    How can I lock in numbers on my Ipad for use in a spreadsheet?

    There is a forum that deals exclusively with "Numbers" discussions:
    https://discussions.apple.com/community/iwork/numbers?view=discussions

  • My free trail for $29.99 as run out. want to join but i can't find serial numbers. help!

    my free trail for $29.99 as run out. want to join but i can't find serial numbers. help!

    Cloud programs do not use serial numbers... you download & install & activate by logging in to your paid Cloud account
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html

  • Can't post a question

    I get a red banner, saying I can't update or create content when I try to post this question:
    Using H&R Block Deluxe software on my MacBook Pro has been a nightmare this year. I've used Block software for years with no problems, but this year has been a bear. This is the first year, of course, that I've had Yosemite as my operating system. I initially couldn't save/open my return using a CD I got from Office Depot. I got an error message: "string ID insertion failed." Block Customer Support indicated the program ws corrupted. In talking with the Block rep, I picked up on her total unfamiliarity with Yosemite. She was only aware of the "cat" operating systems. I uninstalled Block and installed a download provided by Customer Support. I was able to complete both federal and state returns and successfully transmitted them. I got the message in my e-mail that both returns were accepted. My problem now is that when I go into the program and try to check the status, I get the same error message about an insertion error. I had saved my data in three different locations, including a flash drive, just before I filed, but I get the same error message when I try to open them. So, I have no acces to my 2014 digital return. Block Customer Support is telling me my returns can't be retrieved. This is the first time I've been in a situation where I have 3 back-ups of a file, but am being told the data is hopelessly lost.

    Always keep your previous systems - you can make a bootable backup, called a clone of your system and data.
    http://bombich.com/
    Always assume that software may take a full product cycle or 6-12 months even to be compatible and tested/certified.
    This is not a MacBook Pro forum, maybe even Yosemite would be more to the point.
    MacBook Pro
    I would guess you mean you can't post on H&R?
    H&R Block Community
    http://community.hrblock.com/t5/DIY-Products/bd-p/do-it-yourself/page/23
    My brother and I run some financial software on (gasp) Windows using Parallels or VMware or VirtualBox https://www.virtualbox.org/  which  have support and can use Windows 7 or later. If  you could virtualize your last OS such as Snow Leopard or Mavericks, would be convenient instead of dual booting.

  • Hello you have funny forum can  i post my message here?

    My name : Julia a new on this forum here you can find my
    photos
    and information about me :
    http://www.videofriends.net/search.php?search=1&niknik=MostHonourable&affi=jack
    If you like me, write to my email or we can talk on the
    forum,I will
    be hapy to have a
    conversation with good and interesting gentleman.

    Emulsifier wrote:
    By username, you mean I can't post his/her Skype user name. Just a generic:
    Me: blah blah
    Them: blah blah
    Me: blah blah
    Etc.?
    And also, there is no identifiable personal information in the text chats, no emails, IP's, first names, addresses or anything.
    There's no problem with that, go ahead. At the end of the day, if they're saying you are something that you're not, there's absolutely no reason why you shouldn't be allowed to tell them to back off and prove why. Just bare in mind that if it does elevate to a full on legal war, everything hidden on both sides comes out of the dark in the end hehe
    Anthony
    This post was by Anthony- I do not work for Microsoft!
    If this solved your issue - Mark it as a solution! If you like my post - Please add Kudos!
    Spotify Community Profile - Anthony
    Feel free to PM me - Here

  • In Icloud I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    In Icloud on my imac I can't see my "numbers" icon which i need to select "tick" to transfer data to my other devices via icloud. any ideas why it's not showing up?

    You have to do it app wise, which means that the icon won't show up in settings, but you will be able to move files from your local drive to iCloud via the Numbers app (move... > choose the iCloud option).
    It requires that you set up the same iCloud account on all your devices and that you have the latest version of Numbers on all your devices as well.

  • How can I POST data within the same page if I have a A HREF -tag as input?

    How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

    you can use like this or call javascript fuction and submit the form
    <form method=post action="/mypage">
    cnmsdesign.doc     
    </form>

  • I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number.  We all have an iPad and all use the same apple ID as iPad the bill.  How can I remove their numbers and add mine?

    Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

  • Re: How can I post an image?

    Merging the hints, how does this look?
    Showing an image in Apple Discussions requires two things.
    1. The image has to exist and be accessible from a working server somewhere.
    2. Then the image can be referenced in html and will appear in your post.
    1. To achieve the first you need to register on one of the many free web photo hosting sites. An example of one would be Flicker. (If you have your own web site you can of course host your picture there.)
    Having taken a snapshot of the thing in question (the image), perhaps by using the Grab application on your Mac, you upload the image to your photo hosting site.
    You'll then need to get its URL from the site. It might be easy to see or you might have to read the site's FAQ for those details, as there are differences between sites.
    Easier still, if you are using Safari or Firefox right clicking (or Control click with a one button mouse) on the uploaded image will copy the link for you.
    It will have a form like this:
    http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg
    When you find it, open a new tab in your browser and paste it into it, to check that it displays and is therefore the correct URL for the image.
    2. To add this image to your post here on Apple Discussions, place an exclamation point before and after the link, illustrated as,
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg&#033;
    which produces the image in the post.
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!
    An alternate html format is;
    <img src="http://source.address.of.image.jpg"/>

    How can I post an image? (Revision 2. Thanks to rrcharles)
    Showing an image in Apple Discussions requires two things.
    1. The image has to exist and be accessible from a working server somewhere.
    2. Then the image can be referenced in html and will appear in your post.
    1. To achieve the first you need to register on one of the many free web photo hosting sites. An example of one would be Flicker.
    Having taken a snapshot of the thing in question (the image), perhaps by using the Grab application on your Mac, you upload the image to your photo hosting site.
    You'll then need to get its URL from the site. It might be easy to see or you might have to read the site's FAQ for those details, as there are differences between sites.
    Easier still, if you are using Safari or Firefox right clicking (or Control click with a one button mouse) on the uploaded image will copy the link for you.
    It will have a form like this:
    http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg
    When you find it, open a new tab in your browser and paste it into it, to check that it displays and is therefore the correct URL for the image.
    2. To add this image to your post here on Apple Discussions, place an exclamation point before and after the link, illustrated as,
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg&#033;
    which produces the image in the post.
    !http://farm3.static.flickr.com/2186/24541163585b68ff68b8s.jpg!

  • How can you post comments during signal aquisition?

    How can you post comments during signal aquisition? For example, while acquiring your signal, you want to post a comment which the temperature reads at "30 seconds" from your relative start time (t=34 sec into recording)
    I have the LE package where events, alarms, etc cannot be used. Are there other ways that the user can mark an "event" during recording?

    Hey hkim,
    If you know how long it will be before you want a message to pop up you can simply include a sequence structure and in the first sequence have a wait time of your desired length and have the message pop up and display in the second sequence frame. 
    Hope This Helps,
    Doug B
    Applications Engineer
    National Instruments

  • HT4314 hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

    hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

    And the answer is: 
    williamfromlongueuil wrote:
    we have the same itunes account in game center
    You need to have your own account...  DUH....

Maybe you are looking for