I can't power up my pavilion dv6-3210. It has been working for over a year.

I can't get any power signal. No lights when plugged in. I tried to remove the battery and still no luck. Just dead. It was working last night fine but a few days ago had the same problem and removing the battery then powering up worked. Now nothing.
It is out of warranty so I need to know if HP does repair.Couldn't find anything on their site.

It's back working. I'm thinking that maybe because it was plugged in while sitting on the carpet it might have engaged the heat sensor. Anyway I tried it again after a few hours without plugging it in and it fired up.

Similar Messages

  • Can I interrupt an automatic update to iPhoto? If so, how? And how can I stop automatic updates? This current update has been running for over 4 hours now. I have a MacBook Pro w/OSX 10.9.1

    Can I interrupt an automatic update to iPhoto? Also, how can I turn OFF  automatic updates?

    as Larry said, just a caution about the App Store Preferences:
    If you do not want your software to update automatically, disable "Install app updates".  But better not disable the option "Install system data files and security updates".  If there are security updates available, it is important to get them installed asap.

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

    I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

    i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down.  The window will not close ever, just keeps spinning around...help!

    How can I stop the 'Adobe Reader Update' from constantly trying to download?  It's been over a week now, preventing me from signing out of my computer and other issues too. Can you help please? thanks!

    Hi! The version is OS X 10 8 5...not sure what that means lol but it makes a difference obviously! 
    I did what  you said now and it has worked, thanks so very much for getting back to me.  I really appreciate your help!!
    Can I ask you questions in the future or do I just do that through the forum?\
    Thanks again, Jennie 
          From: Anubha Goel <[email protected]>
    To: rubyrose1950 <[email protected]>
    Sent: Sunday, April 26, 2015 10:42 PM
    Subject: You have been mentioned by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community
    |
    You have been mentioned
    by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community - View Anubha Goel's reference to you  Hey rubyrose1950, Could you please let me know what version of OS are you working on.You might try uninstalling Reader and install it again from the below mentioned link:Adobe Acrobat Reader DC Install for all versions Let me know how it goes. Regards,Anubha 
    Participate in the conversation by replying to this email
    To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

  • Can not change my desk top theme pin wheel has been loading for 4 weeks whats going on?

    can not change my desk top theme pin wheel has been loading for 4 weeks whats going on?It says loading image.. how can i fix this..

    Restart your machine.. then repair permissions..

  • HP Pavilion dv6 Fingerprint Scanner has stopped working

    Ok, I have been trying to troubleshoot this problem for hours with no avail. I have looked up basically every suggestion out there for fixing the issue and none have worked.
    I can no longer use my fingerprint scanner to log into my laptop like I used to before. When I swipe my finger across the scanner, it doesn't even light up, and the computer regiesters nothing. I thought this was maybe because I had unintentionally uninstalled some of the related software, but I wasn't sure what.
    I uninstalled and reinstalled both HP SimplePass 2012, and the Validity Fingerprint Sensor driver from this url: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-82046-1
    My computer told me that the Validity reinstallation was successful, and I have rebooted my computer. I have even tried a hard reset. However, when I go into Control Panel > Handware and Sound > Biometric Devices, I see Validity Sensors Inc. appear in the list, but it is always listed as "Unavailable." If I go Control Panel > Hardware and Sound and click on "Use your fingerprint with Windows" under Biometric Devices, I get a message saying
    "There are no fingerprint readers available at this time
    There are no fingerprint readers attached to this computer, or all the fingerprint readers are being used by other programs"
    Trying to go through HP SimplePass 2012 was thoroughly unhelpful, I found no menus or information related to fingerprint scanning or using fingerprints to log into Windows or anything.
    I have even went into Control Panel > System and Security > Administrative Tools > Services > Credentials Manager> restart, to restart the Biometrics stuff as well. Nothing.
    So, I'm kind of at the end of my wits with this, and I've got nothing left in the playbook. Can anyone help me out? It would be very much appreciated!
    P.S/EDIT: I'm running a 64 bit Windows 7 on my laptop, if that helps anyone.

    Ok, I did a little more digging and I think I've figured out something.
    It seems like what I uninstalled and reinstalled from my computer was HP SinglePass 2012.
    What I need to be installing is HP SinglePass Identity Protection (2011?)
    Because it seems like these are two completely different things. I was confused as to why screenshots of HP SinglePass Identity Protection didn't look anything like my SinglePass software.
    Is this correct? Are these two programs different, and do I need the Identity Protection software? I'd like to believe HP DIDN'T create two different programs with the exact same name just to confuse me -_-
    Anyway, going to be trying this later today.

  • How can i manage old data on my file server that as not been used for over 2 years?

    I have 4 file servers and more then 50% of the data is older then 2 years
    I would like to move that data to another san, slower but i would like the user to have access by shortcut on there share
    Would make it faster to backup because the drive would be 50% less big and would not affect users because they would see the same thing in there share it would just be a little lomnger to open file upon need.
    Thanks
    I have an environement 2008r2 but can transfert everything to a 2012 r2 if needed
    Thanks

    robocopy is the tool I recommend to use for that. See that: https://social.technet.microsoft.com/Forums/windowsserver/en-US/51e5f602-b7f2-4d06-adda-1372c30f6250/help-for-script-to-move-old-files?forum=winserverpowershell
    You can also add the shortcuts using a script: http://superuser.com/questions/455364/how-to-create-a-shortcut-using-a-batch-script
    More if you ask them in the Scripting forum: https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • What can I do about an iMovie app I downloaded that has been "loading" for over 30mon now?

    Hi all. I'm new to Apple and don't know what to do. I downloaded apples free iMovie app onto my iPhone 5c wig iOS 7.04. Even though that was over 30min ago now, the desktop icon for the app still says that it's "loading". What can I do to delete it? When I click on the loading icon it just pauses it. Thanks for any help out there in appleland!

    See if you can download it as a previous purchase in iTunes on your computer (http://support.apple.com/kb/ht2519), then sync it to your phone.

  • I can't access my internet; it won't connect. It has worked for over a year.

    I changed to Firefox some time ago and have had no problems. Now when I click on Mozilla Firefox I get no connection to my verizon internet account. That has not been a problem before. The screen shows it is trying to connect but nothing happens.

    If you use the IE tab extension then try to disable it.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    * https://addons.mozilla.org/en-US/firefox/addon/ie-tab-2-ff-36/

  • HT201401 I am unable to end a call and have tried everything to disconnect it.   Has been running for 9 hours.  How can I end this call?

    I am unable to end a call and have tried everything to disconnect it.   Has been running for over 9 hrs.   I seem to be caught in a loop.
    How can I end this call?

    hold down the power botton on the top of the phone.  Then slide to power off. wait to the count of 10 then hold down the power button again till the apple logo comes on.

  • When I going to download some app I can't because said to me yor Apple ID has been disabled

    Can you please help me what can I do?

    Apple ID: “This Apple ID has been disabled for security reasons” alert appears
    http://support.apple.com/kb/ts2446
    Contact Apple Support
    https://expresslane.apple.com/GetproductgroupList.action
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Look at this post https://discussions.apple.com/thread/5767569?tstart=60
     Cheers, Tom

  • HP Pavilion DV6 Beats Audio speakers stopped working

    the speakers on my HP Pavilion DV6 Beats Audio laptop stopped working and there is absolutely no sound coming out from it. Please help!
    This question was solved.
    View Solution.

    Get your full Model number or Product number from the Service Tag attached to bottom of laptop (probably  under battery)
    How Do I Find My Model Number or Product Number
     Once you have the info, use the button at top of this page titled "Support", then click "Download drivers" from the menu. Enter your Product Number. After entering PN click 'Go". On the next page use the dropdown menu to select your Operating System, click Next. A list will populate with drivers/software.
      Download & Save the latest Audio driver.Go into Control Panel,Programs & Features -Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
    If still no sound,try a hard reset.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My HP-Pavilion dv6 web cam is not working properly, fluctuating always

    My HP-Pavilion dv6 web cam is not working properly, it is fluctuating always

    re-install drivers and try again. ( also easy capture )

Maybe you are looking for