I can't preview my clips, major lag!

Even when I render my clips I am unable to see what I'm working with. If I restart my computer and press play I am able to preview with no lag, but if I pause it or want to preview a different section the lag starts again.
Are there any settings I can adjust in order to be able to see what I'm actually working with? Decrease preview resolution or something maybe..
My computer is ok but I think it might be time to replace it soon..

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840

Similar Messages

Can't preview footage on my deck

I'm still on FCE 2 (planning to do a major system upgrade later this year), and ran into capture problems, like everyone else, when I upgraded to OS 10.4.9. After reading on this board about the problem and solution (upgrade FCE or revert to an older OS) I remembered I had created a back-up of OS 10.4.7 on an external hard drive. Lucky me. I re-started in that OS and was able to capture successfully.
Now the problem. I can't preview my footage through my deck any longer. Yesterday right after capturing several clips I dropped some on the time line and wanted to preview through my deck on TV. The deck would not recognize anything coming from FCE. This is the same exact setup that I just used to capture -- OS 10.4.7 with QT 7.1.2.
I switched over to OS 10.4.9 with QT 7.1.5 installed and was also not able to see any image on my deck.
Any suggestions?

OK, the problem is back...I guess I was to early in calling this one solved. As I stated the weird thing is that I can capture without any problems now but as soon as I close the capture window and try editing I lose the image on my deck.
Any suggestions?

I've just rented Monsters vs Aliens on my Apple TV 3 and once we switched to default language - Russian we have experienced major lag in sound, apx. 1 sec delay with the picture. English soundtrack works fine, once we put Russian back - the delay is back.

I've just rented Monsters vs Aliens on my Apple TV 3 and once we switched to default language - Russian we have experienced major lag in sound, apx. 1 sec delay with the picture. English soundtrack works fine, once we put Russian back - the delay is back. How can this be fixed? Please advise. Thank you in advance.
PS. Just bought the Monster's Inc. and Russian soundtrack works fine.

Agreed! This bug with the ringtone delay (№4.1) is really annoying

Why is PE10 very slow (broken) to preview wmv clip?

I realize that wmv clips are fairly processor intensive to decode or render, but I just encountered one (created by Google Earth Pro) that affectively breaks my Elements application.
When attempting to preview the clip from the project timeline, the preview display window only updates about every 5 seconds or so and the timeline cursor jumps similarly sporatically. Even after playing beyond the wmv clip into titles and other mpeg clips, the preview process is obviously still bogged down. I have to stop the playback and re-locate the time cursor somewhere outside the wmv clip to restore normal playback response.
Does anyone have any suggestions as to what might be conflicting or causing the processing halt? I'm running Win7 64-bit OS, on an i7 x990 (hex core) 3.47GHz processor with 24G of RAM and dual SATA hard drives. Surely the hardware is capable of doing the processing, but I'm not sure about Adobe Premier Elements now.
Regards,
Roger Green

Thanks for the suggestion.
I am currently using PE10 to compose/edit an HDV project off my camcorder, which is what its supposed to "good at", right?
The problem surfaced when I tried to paste in a short ~30sec wmv file as a title lead-in clip. It is an "HD" clip created by GoogleEarth, and I did not have much control over the format other than requesting 1920x1080 HD in order to be comparable to other HDV content of my project.
I suspect it is heavily compressed and requires a bit of processing power to decode. What I did not expect was for it to essentially "break" the Elements application. Afterall, it can decode and understand wmv formats. However, it apparently can't figure out how to use my 12-processor cores to accomplish that.
Perhaps I should use the Windows MovieMaker to edit the wmv (shorten it a bit) and save to some other format that Premier Elements can deal with more efficiently?
Thanks again!
Roger

Can't preview or puchase songs

I just downloaded I Tunes 10.0 but can't preview the sample clip of the songs I want to buy......and I can't purchase the song either.....I think this was happening prior to the download of I Tunes 10.0 but not sure.....Can anyone tell me how to fix this........and thanks in advance for the advice Jim

I just downloaded I Tunes 10.0 but can't preview the sample clip of the songs I want to buy......and I can't purchase the song either.....I think this was happening prior to the download of I Tunes 10.0 but not sure.....Can anyone tell me how to fix this........and thanks in advance for the advice Jim
custom Windows 7 amd quad proessor

"feeds and updates" widget causing major lag since froyo

Hey guys,
Ive noticed that ever since I downloaded the Froyo OTA update last week, the "feeds and updates" widget is causing MAJOR lag issues. It takes several seconds to move from that screen that the widet is on, and trying to scroll through the widget is VERY slow and choppy. I have tried both the soft reset and the hard reset, without any improvement. If I remove the widget from the screen, my phone gets significantly faster, and the lag pretty much disappears, so Im pretty sure its that widget causing the problem. Has anyone else noticed this problem, and if so, is there any way to fix it? I like using that widget for my facebook updates, and want to keep it!

Kizersosei wrote:
I have a Samsung Galaxy S Fascinate and since the Froyo 2.2 OTA update last week, my phone turns into a brick as soon as I add my Facebook account to the Feeds and Updates widget. The screen locks up, I can not scroll the wall up and down, and scrolling the screens left and right takes forever; they freeze between screens and everything lags to the point where the phone becomes useless. I powered the phone down and up, took the battery out, no remedy. A hard reset on the phone will make the phone usable again, but as soon as I add Facebook back to the Feeds and Updates widget, the phone starts locking up again. Called Verizon and they reached out to Samsung who thought there was a glitch during the download of the 2.2 software, so Verizon sent me a replacement phone of the same make and model. As soon as I activated it, it told me Froyo 2.2 was ready to be downloaded to the phone for updating. Did that, everything was working fine UNTIL I added my Facebook account to the Feeds and Updates widget; the phone started lagging and locking up as the previous one did. I'm waiting to talk to Level 3 support with Samsung as I write this. Please note, if I reset the phone and don't add my Facebook account to the Feeds and Updates widget, the phone is usable. However, I did notice that in Vibrate Mode with text message and email notification, the vibration barely lasted a millisecond; I could not feel the vibrations in my pocket. In my opinion, this 2.2 update is flawed and needs re-working. I had no issues with this phone with the 2.1 software, and would prefer to go back to it if possible until 2.2 is fixed or another, non-buggy update is released for this phone.
If that is your wish for now, I see no problem in you going back to 2.1. Verizon support should be able to provide you with that os. Just be sure you don't then check for any new updates.

Major lag on bbm after update

Has anyone else had an issue with major lag when typing a msg on bbm since the update never had this problem before I can write 7/8 words before its showing on screen
also ive noticed that the battery life is really bad now
help please as this is driving me mad
g me mad

You might want to try downgrading to the old version. Click the link below on your BB.
http://www.blackberry.com/bbm-redirects/bbm-download.shtml
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Flash latest update & 13 have major 'lag' issues?...

I tend to use flash to play a number of MMO games,... after the update last week, everything went from normal smooth operations to major 'lag time' between giving the computer a command & that command being executed. (In Real Time Games, I hope you can understand the issue - it made all the Real Time app's unplayable.) at first I wrote this off to server loading,... but on reflection, that didn't seem to fit. I remember that the only update that happened recently was a flash update, and that the update took place about the same time I started having the issues.
So,... I went to adobe site & loaded the most recent version of flash (12), and the problems got worse. I then loaded the beta version (13), and the lag problem during normal game play went away. (so, it is definitely a flash problem.) However, with 13 installed, there is a major cursor lag when you move the cursor while holding down any key on the keyboard. Again,.. almost all MMO RT games require you to make extremely fast movements while holding down a key for a specific effect,.... nearly impossible with flash 13.
I've now confirmed the same problem and effects for both the latest update of flash & flash 13 with all my on-line team-mates (over 100 people all over the globe), and 100% of them have had exactly the same problems,... with both the latest update and with flash 13.
I don't know what you did in the last update,... but whatever it was was really wrong....
We have a huge (world-wide) tournament coming up this coming weekend (29th-30th of March - 2014), and none of us are mission capable because of your changes to flash,.... please,... please find us a fix & find it fast?......
Thanks & very best,
- JMaster5K
Message was edited by: JMaster5K
I have now tried gaming with both flash 12 & 13 with hardware acceleration both enabled and disabled,... flash 13 with hardware acceleration enabled works the best, but there is still a significant cursor lag that didn't exist prior to the last update. Thanks again JMaster5K

http://technet.microsoft.com/en-us/sysinternals/bb896653
Hi sweepdastone and welcome to the community,
You could open task manager and see what is using up all your CPU or you could download the tool from the link and it will give you a more complete picture of what is running.
You're not running all of the antivirus programs at once, are you? Running more than one will conflict and you'll end up with no virus protection at all, just a lot of conflicts and CPU usage.
Seeing as how you just got a warning about a partition, I'd run a hard drive diagnostic tool and see if there are any hard drive problems. You might have a failing hard drive. I would back up any files you don't want to lose because just running a hard drive diagnostic could make a failing hard drive fail.
Edit: As far as your partitions go, there are actually four. One you can't see and there's files on two of the other ones that are hidden. Two of those have to do with recovery. The factory default image is on one.
Good luck
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can we preview data after RKM in SAP in ODI 11g

can we able to right click and view data in models after reverse engineering in SAP in ODI 11g ??
Edited by: Drona on Mar 16, 2012 1:06 PM

No we cannot preview the data as SAP connection is made using Jco adapter.
We can only preview the data for data servers which are connected using jdbc.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can you avoid multiple clips of the same media in a project

We have 2 suites and we sometimes work together on a common project utilising the same media.
If I want to use a sequence from the other suite I can easily import it.
The problem: it creates another folder with clips that only belong to the imported sequence.
The end result after a few imported sequences is that my final timeline has instances in it that
are from clips belonging to several different folders or bins even though the media is the same.
In summary... is there a way you can avoid having multiple clips of the same media in a project.
Makes for a very messy project when you have finished.
You've got multiple clips with the same name scattered everywhere.
Cheers

Not yet.
I'm kind of hoping this type of media management will be vastly improved in CS6, whose main new 'feature' reeeeeally needs to be outstanding network collaboration with other editors working on the same project.

How can I move a clip from one movie to another

How can I move a clip from one movie to another?

If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

Why is it, again, that I can't drag-timestretch clips and make them and snap to rulers? (in MT)

How come while 1'm holding control and dragging the edge of a clip to timestretch it, I can't make it snap to the rules, If I want to say bring it from 6 bars back to 5 bars why can't the timestretched clip snap to the ruler while I'm stretching it?
The Automation not being able to keep up continues to annoy me, and prevent me from creating certain effects on a couple of tracks, is there any effects arrangement (multiple efx perhaps) that anyone knows of that will create a tremolo effect that you can regulate with the settings? So I can bring the volume up and down fairly rapidly in rhythm?

I"m starting to figure out the automation, hard to understand the description of controls but I messed around with enough to notice some improvement in the recording of the mute on/off

An event in one of my libraries no longer has the event icon next to it's name just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing.

an event in one of my libraries no longer has the event icon next to it's name in the browser just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing. After control clicking the event it shows all the media that has been previously imported. But it does not allow anything to be done to the event including deleting. This showed up at the beginning of a normal import session. This is fortunately the back-up evant.

Did you perhaps mess with the contents of the library in the Finder?
You may try the solution suggested in this thread:
https://discussions.apple.com/message/24915790#24915790

I can't preview my clips, major lag!

Similar Messages

Maybe you are looking for