I can't print a photo because the ICC profile is not installed. What do I do?
I can't print a photo because the ICC profile is not installed. What do I do?
Try from the Editor "Save As"
Then choose jpeg with sRGB profile.
Similar Messages
-
"This iPod can not be used because the required software is not installed"
I downgraded my ipod touch to 1.1.1, then back up to 1.1.2
now whenever i plug it in it says, "This iPod can not be used because the required software is not installed"
what should i do?????????????????????????????????????????????????Credit to razorianfly for this information...
Try This:
1. Turn iPod Touch OFF completely.
2. Plug iPod Touch into PC/MAC while still of.
3. Turn iPod touch on, then IMMEDIATELY do the following steps \/
4. Hold the 'Home button' and 'sleep/wake' button together for atleast 5 seconds.
5. The Apple logo will appear
6. When this happens release the 'sleep/wake' button BUT KEEP HOLD OF 'HOME' BUTTON
7. Your iPod will reboot (Apple logo)
6. iTunes will recognise iPod in 'Recovery mode'
8. You will be able to 'restore' your iPod Touch now.
Hope this resolves your problem. It should if done properly.
Good luck... -
I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?
reinstall iPhoto
see this discussion down a few from your post
https://discussions.apple.com/thread/5426566?tstart=0
LN -
When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?
Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu. I have an external hard drive that is set up to Time Machine. The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day. I then clicked "Restore Library" at the bottom right corner of the Time Machine screen. Roughly 2 hours later my iphoto was back to normal. When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend. I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library. Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed. Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto? If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above. Otherwise, good luck with your investigations. I'd be interested in hearing how you make out.
Karen -
This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64 bit version of itunes. Why does it keep saying that? Will someone Help me please!? This is is getting frustrating. I already had done a full removal of everything! I even removed and deleted my library...then had to put all 500 songs back on one by one. So, i don't have to remove everything again, just to get my ipod to work on here. You, know before the itunes update, my ipod and itunes were working just fine.
wow, that was a quick reply. lol. but i have removed everything. I wasn't even able to get iTunes on my computer for a little while. i kept getting errors on that. Now it's saying that the required software isn't installed. Hmm, could it be referring to Apple Mobile Device Support? That is supposed to be installed with when iTunes gets installed right? I only ask, because that didn't get installed with the itunes setup.
-
I have a new iPod Touch 5th gen. My computer works on Windows 7. Latest ITunes gives me this message: "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." I have already removed and reinstalled a couple of times--making sure to remove all the related applications as well--Bonjour, Apple Software update, Apple Application Support. Help!
(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now? -
my iphone5 was accidentally blocked and i can't unblocked it because the touch screen is not working. what should i do?
Not much you can do. Bring it to Apple for evaluation.
-
This ipad can not be used because the required software is not installed
This Ipad can not be used because the required software is not installed. Run the itunes, then install the 64-bit version of itunes. Although the 64-bit version installed so. Help!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
My iphone can't be found because "the required software is not installed
As i said, when i connect my iphone to my computer, itunes says, that it can not find it because the required software is not installed and that i should remove itunes and install the 64 bits version.
But, I did this about 5 times, and it still shows this message, this is really getting frustrating. Thanks for your help.Hi Anessen,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best of luck,
Mario -
My iphone not connected to my computer,it shows the message "this iphone can't be used.because the required software is not installed".but i already installed itunes 64 bit...help me
does it show up in explore as a camera ?
-
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes. -
"This iPod cannot be used because the required software is not installed.."
Ok so I have a LONG list of problems with my ipod touch and Vista, I have Vista Home Premium and iTunes wouldnt even install because it gave me a "Vista" error "microsoft.vc80.CRT,public Key Token="1fc8b3b9a1e18e3b",type="win32",version="8.0 .50727.762"processorArchitecture="x86" Please refer to help and support for more information." I found out this was a vista related error but managed to get iTunes 7.5 to work even though this error showed up during installation yet when it rolled back the install and then reinstalled itself, it installed successfully. (I have tried the same with version 8 of iTunes and above but instead of the successful iTunes install like 7.5 and stuff do, it says the install was interrupted and couldnt install)
Ok so now when I plug in my (fw 2.2.1) ipod touch it says "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes. Then reinstall." But I have 7.5 so iPod Touches should work! My computer recognizes it as a camera but that is as far as I get.
1 more thing. I have the usbaapl.sys in the system32/drivers folder that iTunes installed, so I dont get why it cant read my ipod...
PLEASE, if you can help in any way please help!
THANKS!
Message was edited by: ajtjaajtja wrote:
Ok I checked in my "services" section on my computer and apparently, apple mobile device or for that matter, apple ANYTHING is not found.
SCREENSHOT: http://s241.photobucket.com/albums/ff194/ajtja/?action=view¤t=itunesservic es.jpg
does this have anything to do with anything?
Yes. The iPod touch will not be recognized by iTunes if the Apple Mobile Device service is not running.
What security software is running on the PC? Try to reconfigure, temporarily disable, or uninstall the security software. Then reinstall iTunes or repair the Apple Mobile Device installation from Control Panel.
If the issue persists try the *General installation troubleshooting* tips in this article: http://support.apple.com/kb/HT1926
-Jason -
I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1, 64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB . I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes. I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes" In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2 -
I have a 64 GB iPod operating on iOS 5.1.1 (says software is up to date). I finally was able to download iTunes 64 Bit to my computer and open it. Now when I connect my iPod to the computer, I get a message saying "This iPod cannot be used because the required software is not installed. Tun the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I have removed iTunes from my computer and downloaded the 64-bit version again and installed it. I still get the same message.
Hi antiklady,
I see that you may be having an issue with compatibility of iTunes when connecting your iOS device. This sort of issue can arise if you have two versions of iTunes installed on your computer, which I feel may be the case. Here is an article that can tell you how to identify the version of iTunes that you have open:
iTunes: How to find which version you are using - Apple Support
http://support.apple.com/en-us/HT201521
If the version of iTunes that is opened is not the version you are required to use for the iOS device in question, try searching through your computer or applications folder to see if there may be two versions of iTunes installed on your computer. Then, uninstall the version that is incompatible using these steps:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
http://support.apple.com/en-us/HT1923
Take care, and thanks for visiting the Apple Support Communities.
-Braden
Maybe you are looking for
-
Is it possible to create a custom filter control in SSRS 2005?
Hello! I need to make a custom filter control for my reports which will provide some options for date parameter: - year and month selection - Some RadioButtons: "Yesterday", "Today", "Tommorow", "Last week", "Next week" - Date range Please, give any
-
When mirroring how do I close my display on my iPad/iPhone while using tv apps and not closing airplay
-
10.8.5 is named 10.8.3 in the Dock. Does not show in Applications?
This seems an odd situaion... I am trying to create a bootable 10.8.5 installer. I have done this with all of the version numbers... As a "just in case I need to fresh install at any point". It saves on bandwidth usage, not having to download the OS
-
How to use AFP fonts in XSL FO .
-
How to install java enterprise on Lion
Hi to all. How can I install Java Enterprise on Mac Os X Lion? Thanks to all...