I can't print(i use macbook air) pls help

my printer is hp deskjet f4280 model, when i connect to printer, it shows connect status but when i press print to perforn my task it never print out.

try asking here: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/bd-p/Software
or here: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=3390949

Similar Messages

My HP Officejet Pro 8600 can't print from my MacBook Air

Hi,
My HP Officejet Pro 8600 can't print from my MacBook Air. It keeps on showing "The printer is not connected", but the screen on the printer shows connected. I often reset the printer 'EVERY TIME" I want to use it. I also tried to turn off my laptop and printer several times before printing. If I'm lucky enough, it will work maybe for one or two prints. If no luck then I'll have to reset everything again. Sometimes I reset the printer, the printer will not show on my selection.
This question was solved.
View Solution.

Hello boojoo1tw,
Welcome to the HP Forums!
I understand you're unable to print most times with your Officejet 8600. How is this printer connected? Wireless or USB? What is your operating system on your Mac computer? Click here to find out.
If your printer is wireless, then I would recommend assigning a "Static IP Address" by following this HP document on Printer Does Not Maintain Wireless Connection.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

I have a lexmark wireless (4650) printer and I can't print from my MacBook Air unless it is connected by the USB

I have a MacBook Air (new) and I am trying to print wirelessly on my Lexmark 4650 - the printer has a wireless connection and will print only if i manually connect the laptop to the printer vis USB - Can anyone help me figure out what else I need to do?

As you can see here, Mountain Lion does not directly support that model of printer:
http://support.apple.com/kb/HT3669#lexmark
... try this article to see if it helps:
http://support.apple.com/kb/HT4670

I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

Check here, if this can help:
http://support.apple.com/kb/HT4670?viewlocale=en_US

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can I use macbook air for ios app development?

I would like to know if i can use macbook air for ios app development or macbook pro is only option?

Just to reinforce what shldr2thewheel says - be very sure what size memory you want if you get a Macbook Air. There is *no* way to change after purchase. My advice is to go for the 4GB option - especially if you want to do app development.
The internal storage (solid state drive) of the Air can be upgraded if required but it will probably be an expensive option. If you don't think the storage will be enough then maybe using a USB connected drive to hold non-essential files is an option.
As to deciding between the Air and Pro you are basically making a decision between portability (Air) and expandability/bigger screens (Pro). What is more important to you?
Mark

I have a macbook air and i made a movie on my imovie. Now i want to burn it to a dvd using a flashdrive and burning it on another PC that has a burner. Does anyone know how i can do this? My macbook air HAS IDVD....

Now i want to burn it to a dvd using a flashdrive and burning it on another PC that has a burner. Does anyone know how i can do this? My macbook air HAS IDVD....

Here are dedicated discussion forums for iMovie and iDVD, where you might more likely find help.

I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?

I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?

If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
(113079)

I bought a used macbook air, with reinstalled the OS without iMovie. How can I get iMovie on App free of charge as a default in macbook air ?

I bought a used macbook air, with reinstalled the OS without iMovie. How can I get iMovie on App free of charge as a default in macbook air ?

Unfortunately, as recommended by the lady from CA, as long as the Mac is still associated with the Apple ID of the original owner, you can't even buy those iLife apps with that Mac. You will always get the alert to download them with the original owner's Apple ID.
As suggested by the chavo from España, you need the original owner to contact Apple Care* and request that the OS and the iLife apps be disassociated from his Apple ID. Then you should be free to OS X Recovery to resinstall the most recent version of OS X that shipped with the Mac and install the iLife apps. Afterward, before using any of the iLife apps you need to open the Mac App Store (MAS) to the Purchases pane and Accept these apps into your MAS account's Apple ID. If you use any of the iLife apps before you have accepted them into your account, as per the app's Terms of Use, they all become one-trick-ponies that can not be downloaded onto another Mac or updated.
OS X Recovery -
http://support.apple.com/kb/HT4718
*If you bought the Mac from a 2nd hand shop and don't have access to the original owner, you may need to provide Apple a purchase receipt to offer proof of sale.

I Just purchased a used MacBook Air but it has no OS, how can I re-load the OS?

I Just purchased a used MacBook Air but it has no OS, how can I re-load the OS?

It depends on which operating system was on it when it was released. Older MBAs need disks or a special thumb drive to boot for OS recovery.
Let’s assume it is new enough that it has a recovery partition built in. You can try this and see if it works and if it doesn’t work then it is old enough to need he aforementioned recovery media.
It is simple. First you format the system disk and then you install OS X.
You will need to be in an area with a good wireless Internet signal.
Boot in Recovery Mode:
Power it on and when you hear the bong hold down the Command and R keys simultaneously.
Format the system disk:
> Disk Utility
> Select your system drive.
> Partition
> Partition Layout: 1 Partiton
> Options...
> GUID Partition Table
> OK
> Name: Macintosh HD
> Format: Mac OS Extended (journaled)
> Apply
> Disk Utility > Quit Disk Utility
Install OS X:
> Click on Install OS X and follow the instructions.

How can I print from my MacBook Pro to Canon MP560 using rear tray? I can't find that "option" in the print selection possibilities.

How can I print from my MacBook Pro to Canon MP560 using rear tray? I can't find that "option" in the print selection possibilities.

Sure can.
With a document open in Pages, select to print so that you can see the print dialog as shown below.
Note that to see this view, you may need to press the Show Details button in the bottom left corner. In the image above, since I have the expanded view displayed, this button changes to Hide Details
So with the view shown, first change the Presets menu to Default Settings. Then click the Layout drop menu and select Quality & Media. Make the changes you want and then click on the Presets menu and select Save Current Settings as Preset...
At the next window, give the Preset a name and select the Only this Printer radio button and then click OK to save it. That's it.
As for the Preset that you already have, if you no longer want this preset then you can delete it via the Show Presets menu pane that you've used already.

I can't turn on my MacBook Air despite trying to hold down the power button and using the SMC method. BTW my battery charger lights up to a green when plugged into the laptop.

I can't turn on my MacBook Air despite trying to hold down the power button and using the SMC method. BTW my battery charger lights up to a green when plugged into the laptop.

Hello cass528,
I would be concerned too if my MacBook Air would not power on. I recommend following the steps in this article when experiencing an issue like this:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

can i buy a smaller macbook air (64gb) but use the time capsule for additional data ?

If you plan to store important "original" or "master" files and documents on the Time Capsule, then you might want to think about a way to back up those files to another hard drive.
Why? If the Time Capsule has a problem...and you have no backups....you lose everything.

Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks.

I can send item from my macbook air to my phone using bluetooth but i can't seem to receive them from my phone it always says sending failed

I have paired my phone and my macbook air using the bluetooth and I can send files from my macbook air to my phone but I cant seem to send them from my phone to the computer.
When browsing my phone using the bluetooth on the macbook air it doesnt come up with any files.
What can I do to send my files to my laptop from my phone?

Have you enabled Bluetooth Sharing in the Sharing system preferences pane on your Mac?

I can't print(i use macbook air) pls help

Similar Messages

Maybe you are looking for