I can't print with my printer all in one. the message is err. 0xc18a0201...

I need help, please..
thanks a lot

Hi,
Try following the document below and let us know of any progress:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_uk...
If the issue persists, please clarify your printer model for any possible steps.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Coupon printing with a 3054a All-in-one

I have an iMac running Lion (Mac OS 10.7.2) with a HP 3054a all in one. Whenever I try to print a coupon I get an error message that gives the status as "error" and the job message says "/usr/libexec/cups/filter/CouponConvertor_v2 failed"
I appear to have everything else set up correctly.
Can anyone help? I can't live without my coupons....
I've tried printing in Safari and Firefox with the same results.

Hi there,
There seem to be a number of Mac users who have similar problems with coupons. Try this thread on the apple boards as some users have found it helpful.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Two-sided printing with HP C7280 all-in-one?

Howdy all!
I just bought an HP Photosmart C7280 all-in-one. While ordinary printing works fine, I see no way to do two-sided printing with the current driver. (The accessory is already installed by default.)
Has anyone managed to get this to work?
Thanks!

Hi Randy,
Yes the upside down issue was fixed for me, but only when I manually downloaded and installed the latest HP print drivers from Apple support directly. Apparently the automatic update doesn't recognize the network printer, so it won't download the drivers. I can't remember the exact driver I downloaded and installed, but it was the latest that included the All In One 7200 series. This is the latest I could find, and I believe it was what I downloaded
http://www.apple.com/support/downloads/hpprinterdriver11.html
I hope this helps you!
Todd

Trouble with findig printer with Bonjour (HP all in one printer)

Hi,
I have a problem with connecting to my HP Printer.
When the printer and the iMac is booted freshly I can connect to the printer without any problems, also I can find the printer trought the printer browser via Bonjour.
But after a while the connection is completely lost with the printer, the only way I can connect to the printer is by IP, the dns name (http://HPxxxx.local.) is also not working anymore.
The only solution is turning off the printer and putting it on again, even sometimes I have to restart the iMac.
Is it possible a new installed wireless modem/router is cousing this odd behaviour ? Because it looked like the trouble whas coming after the new router was installed.
When I ping to the printer I can see there are some timeouts from time to time and when the timeouts take too long, the result is that I can't find the printer trough Bonjour anymore.
Thanks!

Hi cowla1,
I understand you need the drivers for the HP 6500A on a Mac. I can help you but will need some more information.
I have provided a link for the drivers up to 10.8. The 10.9 drivers show the documentation to run the Apple Updates for the driver install. HP Officejet 6500A e-All-in-One Printer - E710a Drivers.
Select your operating system, click next and click on the software to download and install.
Make sure when you add the printer, it shows the printer name and not the printer name + Airprint.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Ethernet/Wireless)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing with HP PSC1210 All in one printer

Hello all,
Anyone out there had any luck finding a driver for the HP PSC1210xi all in one printer with Snow Leopard? I had basic printing functionality under Leopard and would just like to have the same under Snow Leopard. As a workaround, I am able to still print and scan just fine using Windows XP running in VMWare Fusion, so, I am not dead in the water. However, I would like to just get basic printing capability restored in Snow Leopard.
Thanks all.

OK, so I have some bad news. FIrst, unfortunately the print drivers for the PSC1210 are not available yet. They will be available at some point in the future through an Apple Software Update. Second, since HP never posted a 10.5 driver package for your device, there is nothing for you to download to try to get things at least functioning.
That being said, you may have some luck with the Gutenprint drivers or others. There isn't a driver specifically for the PSC 1210, but the one for the PSC 1215 may work.
HP is aware of the problem, and I know I am trying to do everything in my power to solve it as soon as possible.
Just trying to help.
Andrew

New MBP won't print with Wifi HP All-in-one that it cam with from Apple

Hey, all just got a new MBP and the free HP all in one wireless printer.
After installing all the software and drivers I managed to bonjour it through our router or direct through USB.
Same on my iMAc
However, Wifi will hang for a few minutes , then start to print and then finish on the print queue but the page will be half printer etc.. With USB it prints straight away and complete pages.
Is this a bug in the drivers or what?
Thanks all,

iTunes, iPhoto, and Safari all use the same protocol for wireless device finding for shared items as the printer. Bonjour may be holding things up, if other items are attempting to share data over the network.

2 sided printing with hp 6800 all in one

I recently went to print my Caring Bridge blog and was amazed I had not noticed the option for 2 sided printing before. (I've have this printer at least 6 mos) I was thrilled how beautifully this worked! Problem is, the 2 sided option doesn't show anymore. Even went back to Caring Bridge and tried to repeat. If I didn't have the 2 sided document I'd think I was loosing my mind. :-) 2 nights ago the 2 sided option appeared again as an ooption. Next thing I trieds to print the 2 sided option had disapperaed again?
I love the 2 sided printing feature and am looking fwd to figuring out how to have this as a permanent option in my printing choices. THank you for your help!
This question was solved.
View Solution.

Ah. I do not speak The Apple.
I know other Experts here might have advice.
Perhaps someone will jump in.
How to Setup Duplex Printing by Default (Mac OS X)
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

How can I scan with HP 5600 all in one?

Hi! I have an HP 5600 all in one. I recently switched to an iMac Leopard. The printer driver does not have any scanning support. Is there any other driver available to get this support? Or will I have to get a compatible printer to be able to use scanning options?
Thanks.

Have you checked the HP site, there is software for the 5600 series of all-in-one printer. Its 188Mb download that is titled "Full feature software and drivers for Mac OS X 10.3-10.5".
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&dlc=en&cc=us&produc t=441123&lang=en
regards

Problem printing with HP 6310 all-in-one

Am using XP with printer connected to computer by cable. I cannot print any documents from word, etc. But I can print test pages from printer and from control panel. I've tried reinstalling drivers, but it didn't help. Would appreciate any suggestions

OK, so I have some bad news. FIrst, unfortunately the print drivers for the PSC1210 are not available yet. They will be available at some point in the future through an Apple Software Update. Second, since HP never posted a 10.5 driver package for your device, there is nothing for you to download to try to get things at least functioning.
That being said, you may have some luck with the Gutenprint drivers or others. There isn't a driver specifically for the PSC 1210, but the one for the PSC 1215 may work.
HP is aware of the problem, and I know I am trying to do everything in my power to solve it as soon as possible.
Just trying to help.
Andrew

Photoshop CS4 and printing with HP 8500 All in one

I have problems with printing direct from Photoshop CS4, then I look in the "Page setup" it looks fine - then I press "Print" - "Scale to Fit media" - "Print..." the images only fill 10% of the paper. The printer is by default ( I have tjek it in the setup ) set to "A4" paper format -
Everything else i print from MS Word, MS Excel looks fine
Steen Mikkelsen

John Joslin wrote:
Right click > Open Image in new tab – click to magnify.
Easy peasy!
Yeah for John ! Never thought of that shortcut. I think you meant right click - 'open link' in new tab ? I don't have the option 'open image in new tab'. Thanks, I was using Chrome @ the time, which unfortunately doesn't have this option, yet.

Word 2010 freezes when I try to print with HP 7410 all-in-one

Word 2010 freezes and has to be closed, cannot save anything once you attempt to print. HP solutions say it is connected to network and desktop connected prints. It uses word 2003 software

Word 2010 freezes and has to be closed, cannot save anything once you attempt to print. HP solutions say it is connected to network and desktop connected prints. It uses word 2003 software

Can't get HP Officejet J6450 All-in-One to scan or print

Hello!
I have an HP Officejet J6450 All-in-One which I would like to use with my Macbook Pro running OS X 10.6.4. I would prefer a wireless setup. It printed wirelessly up until I tried installing the HP Full Feature Software & Drivers from their website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-74787-1 &lc=en&dlc=en&cc=us&os=219&product=3635399&sw_lang=)and subsequently deleted them once I realized it did not work. I also did not want to install a bulky and unnecessary set of programs that I do not need.
I went to the System Preferences/Print & Fax and deleted the HP printers that had been added, then I went to Applications/HewlettPackard and clicked on HP uninstall, and uninstalled the program. Since I have experience with Windows (lol), I decided to take the safe route and make sure my HD & permissions had not been corrupted. I put in my OS X install disk that came with my Macbook Pro, rebooted to the disk, went to Disk Utility and Repaired the Permissions (it only had one that it could not fix), repaired the HD (it found a few issues), and then went one more round of Repair Permissions and then HD just to be sure. I rebooted to the HD and ejected the boot disk. I connected the printer via the USB cable.
Then I found this: (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&softwareitem=mp-7 4787-1&os=219&product=3635399&sw_lang=&docname=c01910186) It says on there that Snow Leopard should have everything I need to scan and print with this printer. However, upon trying the three methods, none worked. Here are the results:
Method One: I get to step 2, select Import from Scanner, and nothing happens. The list that is supposed to be displayed in step 3 never comes.
Method Two: I open the Image Capture app in step 1, but when it comes up, it says "No camera or scanner connected."
Method Three: I get the Print & Fax printer browser opened as in step 3, but cannot move on to step 4 because there is no scan tab.
What can I do to get this to work? I tried contacting HP online chat, but they told me they do not offer support to Mac users on there. I sent them an email through their contact page but you know how that will probably go...
I'm an intermediate computer user, although I'm relatively new to Mac, so be easy on me! I'm scared to break this laptop I've fallen in love with. Many thanks to you all in advance, and my apologies if this has already been answered elsewhere - I was unable to find anything with this particular HP model and situation. I noticed HP does not seem very Mac-friendly!

Is this scanning from the PC and/or from the printer? Did it ever scan previously? Is this connected by USB/wired/wireless?
As far as the software, it would be a good idea to update your software, and I would recommend downloading the latest software at this location:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153494&lc=en&cc=us&dlc=en&lang=en&cc=us
Just pick the right operating system, and get the download and run it. That may fix the scanning issue you are having.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

IPod Touch conflict with HP 6500 All-in-One printer...

Does anyone know of anyone who has an iPod Touch installed with an HP all-in-one printer and running under Windows 7 64 bit? If so I'd like to hear from them and see if I can pick their brains a bit. In fact, I'd like to hear from anyone who has an iPod Touch working with an HP all-in-one on a desktop system, no matter the OS.
Originally I tried to get them to work together under a 32 bit Windows 7 Premium build on an MSI G31M3-F V2 mobo but couldn't get the iPod and the All-in-One to work together. Either the iPod wouldn't synch or the printer would disconnect.
Yesterday I started with a Windows 7 Ultimate 64 bit build on an Asus P5Q-EM mobo with just the HP 6500 All-in-One and the printer and all of its functions were working perfectly.
Then I plugged in the iPod, after having installed the newest 64 bit version of iTunes, and it detected the device but wouldn't complete the driver installation. I powered down the HP 6500 and the iPod installation completed.
I then turned the printer on and it appeared to work but the iPod wouldn't complete the sync process unless I turned the printer off.
Then I changed the drive letter of the HP all-in-one's integrated card reader from "E:" to "G:" and rebooted and it appeared that everything was working. I brought the scanner up but didn't actually scan anything but, still, no disconnect messages. Finally, success I thought. Silly me...
Today my daughter tried to send a fax from the computer. It started the scan, stopped after only partially scanning and said that the printer was disconnected.
She then rebooted and tried to scan a photo and it did essentailly the same thing -- a partial scan, froze, and then reported the printer offline.
Uninstalling the iPod Touch device resulted in the printer coming back online and all functions working perfectly.
There is clearly a conflict at the device/driver assignment level and I don't know if its even anything that I can fix.
This should not be this hard.
Has anyone any experience with the iPod Touch running on a desktop that also has an HP All-in-One device installed?

Finally installed a completely new OS and then, before doing anything else, installed iTunes and connected the iPod. Installed everything else with the HP printer being the very last thing.
Wa La... Worked as advertised...

Can i set the ipad to print to an Hp all in one that is connected to Airport express

Can i set the Ipad to print to an HP All-in-one Printer that is connected to airport express?

Hey Eugene!
Here is the website about AirPrint, if you scroll down it will say in details if your model is compatible with AirPrint.
http://www.apple.com/ipad/features/airprint.html

Are there any updates so i can use my HP Photosmart C4780 All in One Printer wirelessly?

just wondering..are there any updates for the iMac with OS X (10.8.2) so I can use my HP Photosmart C4780 All in One (Print,Scan,Copy)?

Hi,
An HP Full Feature Software is not available for Mountain Lion, therefore the Wireless configuration is tricky and cannot be done through the software.
To connect the printer to your wireless network you will need to create a temporary wireless ad hoc connection, then the wireless connection to your router can be configured via the EWS page:
Step one: Restore the printer's network default settings
Touch the ATM button ( ) next to Wireless / Scan .
Touch the ATM button ( ) next to Wireless Menu .
Touch the ATM button ( ) next to Wireless Settings .
Use the up and down ATM buttons ( ) to select Restore Network Defaults , and then press OK .
Touch the ATM button ( ) next to Yes to confirm your selection.
Step two: Networkly connect the Mac to the printer by creating a temporary ad-hoc connection
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select the printer's SSID, it should be listed as HPSETUP or should contain HP or C4700 within its name.
Click Connect
Allow two-three minutes to fully establish the network connection.
Step three: Connect the printer to your router via the EWS page
Open Safari.
Click the Bookmarks icon ()
Click Bonjour.
Double click the printer name, the EWS page appears.
Open the Networking tab.
From the left pane select Wireless.
Click the Start Wizard button and follow the steps to connect the printer to your router.
Step four: Reconnect the Mac to your router
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select your router SSID.
Click Connect
Allow two-three minutes to fully establish the network connection.
Now the printer should be connected to your network.
Open Print & Scan, click the Plus sign and add the printer listed as Bonjour.
btw John Galt - I this it should be spelled as OS X, please correct me if i'm wrong.. ;-)
Hope that helps,
Shlomi

I can't print with my printer all in one. the message is err. 0xc18a0201​...

Similar Messages

Maybe you are looking for

I can't print with my printer all in one. the message is err. 0xc18a0201...