I can't publish my site Keep getting message 'shapeimage_2_link_1.png'

I keep getting the message "Can’t create the file “shapeimage2_link1.png.” The disk may be damaged, full, or you may not have sufficient access privileges." when ever I publush. What am I doing wrong? has this happened to anyone else? Please help.

Thanks for the sympathy! I do have a question. The damaged file is my primary website. I had separated it from a second website after updating to iWeb 08. The second site publishes fine. I want to keep the URL for the second website exactly as it is because I have forwarding set up with a host other than dotMac. How should I go about setting up a new site?
Thanks for all your help.

Similar Messages

  • Can't publish my site; keep getting 'Disk Error'

    Hi!
    After bringing my original site into '08, I can publish the site. Then if I change anything on my blog page or add entry, I get a variety of results. Sometimes it will publish and sometimes I get the message "Disk Error". I've tried starting from my '06 file, updating it and still eventually get this same message. I have run the Disk Utility, pitched the pref file, run Tech Tool Pro and defragged and optimized the hard drive. And then, tried starting from scratch again without being able to publish. I realize that my file is probably damaged, but I want to make sure there is nothing I can do before starting all over on the website since it is large with lots of pix, movies and blogs.
    thanks!

    Thanks for the sympathy! I do have a question. The damaged file is my primary website. I had separated it from a second website after updating to iWeb 08. The second site publishes fine. I want to keep the URL for the second website exactly as it is because I have forwarding set up with a host other than dotMac. How should I go about setting up a new site?
    Thanks for all your help.

  • Help can not download itunes 7, keep getting message saying

    HKEY-LOCAL-MACHINE\SOFTWARE\CLASSES\QUICKTIMEPLAYERLIB.QUICKTIMEPLAYERAPP\CLSID. VERIFY THAT YOU HAVE ACCESS TO THAT KEY? WHAT!HAVE TRIED CALLING APPLE CAN NOT HEAR A WORD THEY SAY, ANY IDEAS ANY ONE I AM GOING MAD HELP!
      Windows XP  

    First:
    Please don't shout. Writing all your text in capitals is considered SHOUTING.
    Second:
    You posted in the iTunes for Mac forum.
    Third:
    There are several Windows and iTunes knowledgeable people replying to posts in the iTunes for Windows forum.
    They are very helpful and friendly. No need to go mad.
    M

  • I keep getting message that not connected to Internet when trying to access an so site such as amazon, when I can still access other areas of Internet such as banking

    Why do I keep getting message that not connected to Internet when trying to access amazon yet am very obviously am still connected as can access the apple site or banking sites. Have tried resetting.

    I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

  • I use Firefox as my default browser but, on any site, keep getting some words underlined in green from which an ad pops up. Really peeing me off! Doesn't happen on IE or Chrome. How can I stop this?

    I use Firefox as my default browser but, on any site, keep getting some words underlined in green from which an ad pops up. Really peeing me off! Doesn't happen on IE or Chrome. How can I stop this?

    From what you have described, I don't think you are ever going to pick that up as malware at all. But I did look at the site you mentioned in Google Chrome, and in IE9. First thought was maybe Chrome suppresses it, but that would be contrary to trying to convince you that their AdSense or IntelliTXT is "helping" you.
    What I did find in Chrome was
    "Google Chrome's connection attempt to ad-apac.doubleclick.net was rejected. The website may be down, or your network may not be properly configured."
    Since I don't have ad blockers in Chrome or IE, that tells me that my hosts file is doing its job, you can draw you own conclusions. There is something similar displayed in IE, but I can't read what was there because the font-size was too big. for the space. In Firefox with "Adblock Plus" extension it is all wiped out. The hosts file works across the entire system but is directed at blocking malware sites more than advertising. "Adblock Plus" is very good at blocking ads and can do its blocking with more generic filters, and can block a lot of malware from coming in but it can't block at the system level that a hosts file can.
    In IE although I can only see "It appea" because the font is too large and text does not wrap it does actually say "It appears you are connected to the Internet, but you might want to try to reconnect to the Internet."
    I would certainly suggest installing "Adblock Plus" extension and the "Easylist (USA)" filter subscription -- links are in the links previously provided, and installing the hosts file as well also in the links.
    It takes a bit more work to install and maintain a hosts file but the directions should be clear enough.

  • IWeb error messages -- can't publish large site after upgrade.

    I just upgraded to iLife 09 and all of my websites showed up red in the new iWeb - indicating that they needed to be published. I hadn't changed any of them since the upgrade but I figured it was part of the upgrade to republish all of them.
    Whenever I try to publish the sites I get the following message:
    An error occurred while publishing file “/private/var/folders/pM/pMWBd0yEF04cfDIeAZkuPE+TI/TemporaryItems/com.apple.iWeb7281_TEMP_288612390_15/sites/JW/Things_and_Such_files/shapeimage2.png”. Try publishing again later.
    I've tried all the usual suggestions. I threw away the preferences files and cache files for iWeb. I logged out of MobileMe and logged back in. I tried to publish from an older version of my Domain file from Time Machine. If I tell it to publish the site to my desktop then it works just fine. The site that it has problems with creates a 179MB folder on my desktop when I publish to my desktop. The other two sites that I have in iWeb publish perfectly in MobileMe but are not bigger than 3 MB each.
    I tried moving parts of the larger site out of it, publishing the significantly shrunken page and then adding the rest back in smaller pieces. It will publish the smaller selection with no problem. It won't let me add the pieces back in, however. IWeb freezes up when I try and I have to reload the previous Domain file from Time Machine.
    So, my question is: Is there a limit to the size of site that can be published using iWeb? If so how do I get around this?

    Reboot fixed it.

  • Games won't open, keep getting message that it can't connect to Games Center even when opened thru same; reset and reboot not help; any suggestions?

    I keep getting messages that the games cannot connect to the game center.  Even when I try to open using the "play" incon in the Game Center, I get the same message.  The message refuses to do anything when I press either "cancel" or "retry,", it just sits there and the game won't open when it appears.
    I have tried resetting the IPad, turning it off/on; re-syncing, etc., and nothing seems to work.   Can any one suggest a way to get the stupid Game Center message to close or some other method to open the game?
    Thanks.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I can't download any videos, keep getting Error

    I can't download any videos, keep getting Error #2032

    Care to share which OS you are using?
    Which browsers are you trying to download videos from?   Problem appears in only one browser or all?  If one, which one?
    Post the website URL of the site you are trying to download from for others to test it out.

  • I can't access iCloud, i keep getting a message to try again later. This is the first time i have tried to log into icloud. I  know my account is working, i want to access it from my macbook. I think its looking for my old icloud email, what to do?

    I can't access iCloud, i keep getting a message to try again later. This is the first time i have tried to log into icloud. I  know my account is working, i want to access it from my macbook. I think its looking for my old icloud email, what to do? I have a working apple id, i dont understand, could it be linked to an old account iD?

    Hi smccarrison,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article helpful with troubleshooting signing into iCloud:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    All the best,
    Jeremy

  • HT4356 I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1).  For some unknown reason neither one can now print.  I keep getting a message that the printer is no longer avail

    I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1).  For some unknown reason neither one can now print.  I keep getting a message that the printer is no longer available.  My MacBook continues to print ok.  Any ideas?

    Reboot everything.  Router, printer and pad.  If it used to work, it will again.  It just lost itself somewhere.

  • Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.

    Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.

    Make sure you are running as the Administrator of the Account.
    Also...  See this User Tip by turingtest2
    Troubleshooting issues with iTunes for Windows updates

  • I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

    I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

     
    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99807)

  • Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server.

    Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server. Please help.

    Installing an HP network printer

  • I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

    I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz

    This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
    %APPDATA%\Mozilla\Firefox\Profiles
    You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files.

  • How can I clear star up disk - keep getting message that it is almost full

    How can I clear star up disk - keep getting message that it is almost full

    Move the videos and pictures stored on the device to your computer and create more room on the device.

Maybe you are looking for

  • How to set "Cc" field in Dynamic Email address in Receiver JDBC adapter

    I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine. Michal's  blog “Mail Adapter (XI) - how to implement dynamic mail address.” was a gr8 help in doing this. But

  • Open pdf in ie on cd

    I'm trying to make a quick cd for a portfolio I have only 2 buttons, one opens a pdf and the other opens a word doc. With firefox the buttons work with IE they don't. I used set nav bar image in the behaviors to create the button, I even tried just l

  • Where do I get the firefox toolbar that has all the website page rankings on it?

    I had firefox previously on a different comp. I downloaded firefox on a new comp. but the toolbar with all of the website page rankings is not there as it was with my previous version.

  • Case struct v. coerce w.r.t. string input

    Can anyone tell me what's going on with the case structure?  It decides "Z" is  not in the A..Z range.  Works as I expect when I pass it into a "in range and coerce" function. Found on LV2013-32 running on Win7-64.  Confirmed same behaviour in LV2014

  • Error : How to execute *.BAT file

    Some of the friend said me to execute any file following code Runtime rt=Runtime.getRuntime(); Process pr=null; pr = rt.exec("cmd.exe /c start " + "myfilename"); I get error as CreateProcess: cmd.exe /c start myfilename error=0 Press any key to conti