I can't publish to an ftp server. can you help?

G'day everyone,
I've made a lovely iWeb site, but am having problems getting it online. I click publish and iWeb is busy for about 2 - 3 hours, eventually ending with this "PUBLISH ERROR" message:
"There was an error communicating with the FTP server. Try again later, or check with your service provider." I've tried both suggestions, several times.
According to my web host co. I've entered the correct server address, user name, password, path, protocol and port. They also wrote to me "in the files uploaded I dont see any "html" files? I believe you have either not saved your website in the correct format or have failed to upload some content. Please also note that you should (from what I can see) only be uploading files in the jazzpiano.com.au" folder on your MAC to the public_html dir. Not uploading the dir jazzpiano.com.au" itself."
you can see what I have uploaded at http://www.jazzpiano.com.au/jazzpiano.com.au/
Any advice on how I can get iweb to publish to ftp properly would be most appreciated. It publishes fine to my local folder.

What your hosting service is telling you is correct. You have uploaded the folder - jazzpiano.com.au - and not the files inside it. This is a limitation of the iWeb FTP and why you should follow Ethmoid's suggestion of publishing to a local folder and uploading the contents of the folder produced by iWeb using an FTP application like Cyberduck.
The movies appear to be uploaded to the server....
http://www.jazzpiano.com.au/jazzpiano.com.au/Media/clip-2010-05-30%2022%3b19%3b1 6.mov
http://www.jazzpiano.com.au/jazzpiano.com.au/Media/clip-2010-05-30%2022%3b27%3b1 2.mov
.... but may not be loading in the browser due to spaces and special characters in the filename. Simplify this - 30%2022%3b27%3b12, load them into iWeb again and republish.

Similar Messages

Can I publish an OS X Server hosted calendar?

Can I publish an OS X Server hosted calendar to the internet for sharing via subscription.
I would like to publish a calendar for subscription to users who are not server users within Open Directory. Ideally they could subscribe to an .ics file via webdav. It appears that server based calendars can only be shared with other server users.

There are a couple of things you would need to do.
Open your router to allow calendar traffic in and out of your network (be carefull about opeing any custom ports on a router as it could allow for unotherised attacks). All internal user passwords should then be strong and all traffic should be encrypted.
Have your external server.mydomain.com DNS point to a public ip address. - At your router you can rout it to the server machine (public ip's would be supplied by your ISP). This will allow external calendar subscription traffic know where to get the information from.
For invetation replies to work from outside your network to your internal network you will need to get your ISP to set up reverse pointer for your domain to point to your public ip address. This allows people outside your network to accept or decline your calendar invetation - and allows your calendar server to automatlycally post those replies in the relevent calendar.
I havnt gone into much depth with these steps because personally I have moved to using iCloud.
For all the hassle and potential risks of opening up your network I would alternativly set your users up with a free iCloud account and use the calendar service there. Super easy and it works. It also limits the potential external attacks on your network.

Why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet?

why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet? i need to update my ipod i even changed the LAN settings and it stilll doesnt work

Have you seen this article?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
B-rock

Can I set up an FTP server from a networked Time Capsule?

I've been looking around and can't seem to find this specific question addressed anywhere, so I'm hoping someone knows the answer to this.
I have a Time Capsule connected directly to my router. Other than its intended purpose, I would like to connect an external USB hard drive to it, and use that as an accessible FTP server for a select few.
To my understanding, port forwarding the router and giving WAN access would allow any user to see the entirety of the Time Capsule - which I do not want. I only want to share this one drive and have it maintained by an FTP login/password. I would then share this drive on the internal network.
Is this possible? Or will I have to run the FTP server off one of my workstations?
Cheers.

Not in usable and reliable way no.. many things are possible.. if you have the (various bad words for foolishness or courage)... but it is too hard as there is no hacked firmware out there for a TC. It is a device intended for TM backups of laptops by wireless. Anything else is restricted strictly to what Apple want you to use it for. You can buy a cheap NAS, single disk unit will almost inevitably have FTP in them.. over network FTP is ok but remember it is not secure so you want SFTP for internet access.. And be warned.. FTP itself will be blocked from WAN on the TC.
There are severe FTP issues with the AE/TC.. the last couple of versions of the Gen1-5 firmware as well as the Gen 6.. See this thread.
https://discussions.apple.com/message/22948061#22948061
https://discussions.apple.com/message/22927625#22927625
The last post in this thread by.. SBeattie2
I think will condemn you to replacement of the TC by a router that actually conforms to standards if you are trying to forward it to a workstation or NAS even.
SFTP might work.. see this thread.
https://discussions.apple.com/message/22872985#22872985

Can not connect to Cerberus FTP Server with PASV

I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
Response:          220-220-Welcome to Cerberus FTP Server
Response:          220 220 Created by Cerberus, LLC
Command:          USER test
Response:          331 User test, password please
Command:          PASS ***********
Response:          230 Password Ok, User logged in
Command:          CLNT FileZilla
Response:          200 Command okay
Command:          OPTS UTF8 ON
Response:          220 UTF8 support on
Command:          PBSZ 0
Response:          200 PBSZ=0
Command:          PROT P
Response:          200 PROT P OK, data channel will be secured
Status:          Connected
Status:          Retrieving directory listing...
Command:          PWD
Response:          257 "/" is the current directory
Command:          TYPE I
Response:          200 Type Binary
Command:          PASV
Response:          227 Entering Passive Mode (external IP,195,83)
Command:          MLSD
Error:          Connection timed out
Error:          Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.

Dan,
Looking at the output,
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike

Can we use Windows IIS FTP server in SOA

Can anyone help me out whether we can use windows IIS FTP server in SOA for ftp adapter file transfer operations.

910764
1:- I have not begged or requested for marking all answers as helpful. If answers are helpful then post author can do that.
2:- I also follow same practice. I dont blindly mark all answers correct or helpful. It can waste other's time. Correct marking is very important. Hence my all question are not having close end.Few are still open for correct answers. I will happily mark them correct if you can help me in that.
In the end , I will say Kindly refrain yourself using this platform as facebook or other social networking websites.
I hope you will understand seriousness of this forum and utilize its member's posts at the most.
Thanks,
Ashu

Gedit can't save to mounted ftp server

I mounted an ftp server with curlftpfs, as the wiki recommends this method:
sudo curlftpfs ftp://some.server.com /media/ftp.some.server.com/ -o user=user:pass,allow_other,ftp_port=-
I had some trouble to get it to work because it turns out I have to use active mode (I expanded the wiki), but now it works great, and I can cp, mv, rm and edit files as if they were on my local machine.
Except in gedit, which refuses to save files to the mounted ftp. At first it segfaulted, just printing 'Segmentation fault' to the terminal, but this crashing stopped after disabling all plugins. But instead of crashing I now get "Could not save the file $FILE. You do not have the permissions necessary to save the file. Please check that you typed the location correctly and try again."
Same thing when starting gedit as root, odd. So I checked what the permissions were:
ls -l /media/ftp.some.server.com/file.asp
---------- 1 root root 811 17 jan 21:48 /media/ftp.some.server.com/file.asp
I guess this is because the FTP server runs some flavor of windows and doesn't have unix file permissions. After googling unsuccesfully I wanted to start a topic in the networking subforum, but first I tried to change the file using nano, to be sure it wasn't a gedit issue. To my suprise nano can indeed save the file, so I'm putting this in applications and desktop environments.
I think nano is checking the permissions before trying to save the file, while gedit doesn't. Does any of you got an idea to stop it doing this, or to fix the permissions?
Last edited by berz_ (2012-01-17 22:33:02)

With some help from the nice guys in #gedit, I managed to narrow the problem down to gio, a component of glib used by gedit to save files.
I did file a bug on the gnome bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=668147.

I can't publish my work in Motion 5. Help please

Hi everybody here is my problem : In Motion 5 when i finish my work ( animations, .. ) like anybody i want to publish my work ( on youtube,...). In my case every options is green ( locked, i can't click ) and then i can't publish my vid.
Please i need some help.
Thanks

Here is a Screenshot of my problem. And oh yeah i've just done the 2.0.1 update of Pro Apps QT Codecs on Apple's site. I tried it and it doesn't work OMG

Can't Publish changes using FTP

Ok, here is the whole story! At first I published my site using mobile me but then realized that my URL was way too long and not what I wanted since I am making a business site and wanted www.businessname.com. So, I bought a domain from godaddy and then hosted my site using that account. NOW, when I try to publish changes or even republish the entire site to make changes, nothing happens! It will say that my site is now published but then when I click visit site, a message comes up saying that the mobileme page I am looking for can not be found???? But I am not using mobile me to publish anymore!!! Any idea what I need to do? Thanks!

Okay, so when you purchased your domain name from GoDaddy did you also buy a hosting account from them?
If you didn't do this, then you are not publishing using ftp at all. You are still publishing to MobileMe, but you simply need to direct your domain name to web.me.com using CNAME forwarding.
If you did purchase hosting from GoDaddy too, then perhaps rather than using the built in iWeb ftp, you should publish to a local folder and upload to your server space using Cyberduck or Transmit which you can download for free.

Can't publish - no response from server

I can no longer publish any of my websites. I keep getting the message 'no response from server' for all of them. I have waited a few hours, same result. I have unistalled and reinstalled Muse - still nothing.
As it currently stands, all of my websites are now toally useless - and I have major updates to make.
Everything was fine until I updated the product, now its totally redundant. What a 'helpful' update.
What can you do to fix the killer update Adobe?

Hi Aish
I am having the same problem! We only have one website on a BC server (the rest are non BC sites hosted on our own server), but when I select the option from the File menu to: Sync with Adobe Business Catalyst site... the following message is displayed:
Could not sign in to Adobe Business Catalyst. Check your network connection and try again. If this problem persists, try again later.
We received this message yesterday as well, so waiting is not the answer and I definitely have internet access, as all other internet related services work, e.g. email, browser, ftp etc.
The site that I am trying to sync is: http://www.mendipspringgolfclub.com/
Is this all the info you require to provide some help?
Very many thanks for your assistance.
Mike

Can not publish cal to private server

I'm trying to publish a calendar to a private server. I've double checked all of the info, the url, the server is wedDAV enabled (so they say). I use Earthlink as my web hosting isp. Is there anyone out there that has done this successfully? The error message that I get is... "it is not a valid location for this request"
Help.
mb

So they say? Hmm…
Here are some outdated but still applicable instructions to do so under Mac OS X here:
http://www.oreillynet.com/pub/a/network/2000/11/10/osxwebdav/osxwebdav.html
You might use these instructions simply for background on the technology, or as a checklist to setting up your own server.
Your digitally challenged friends with PCs can publish calendars to the same server if they use either Mozilla Sunbird, or the Calendar component available with Firefox. More information about both is available here:
http://www.mozilla.org/projects/calendar/sunbird.html
That original link explained how to set up a WebDAV server on an OS X box. If you want your ISP to provide those services, you'll have to contact them to arrange it. If you're attempting to configure these services on a server provided by Earthlink, you'll have to have them help you. Typically, an 'outsider' cannot configure such services unless a predetermined set of procedures to do so are in place, and you have been given the required access.

Can I publish a calendar twice -or- can I put a cal in two groups

I have two intertwined challenges. If I can solve both, fantastic. Help in solving even one would be appreciated.
1. I want my assistant to have read-only access to my calendar, so he can see when I'm free and when not. However, he doesn't need to see what I'm busy with, only that I'm busy. So, I've grouped two relevant calendars and publish that group, having unchecked "Show titles and notes". He can check it on the web and only sees what is blocked out. Cool.
However, my wife would like to be able to subscribe to my calendar and I would like her to have access to the titles and notes. So, I'd like someway to publish my calendar twice, once without titles and notes and one with. Can't figure out how to do that.
2. One of the calendars in the that group is my wife's calendar of family events, to which I subscribe. This works great in that my assistant doesn't try to schedule something during my kids' school performances, but since my wife subscribes to the calendar describe in (1), her events are coming back to her as part of my calendar. Yuck.
I suspect some version of being able to put a calendar in two groups would solve this, but am open to any solutions. Thanks.

Okay, I feel like an idiot replying to my own question, but I figured it out and bet it may not be that rare a problem. So, here is what I did. A bit convoluted, I admit. Perhaps someone can come up with a better way...
1. Create calendar group called "Private" containing only calendars I input.
2. Publish "Private" as "MyNamePrivate", set to show titles and notes. Only give that address to my wife.
3. Subscribe to "MyNamePrivate" myself. Include it and my wife's calendar that I've subscribed to in a group called "MyName".
3.5 Check my wife's calendar so I see it.
4. Publish "MyName", set to NOT show titles and notes. Give that address to my assistant, my dog, etc.
5. Uncheck "MyName", so I'm not seeing events twice.

I can't publish one project but I can publish others.

When I try to publish, the Export to HTML checkbox is greyed out. I can click on all other checkboxes, but in every case the process seems to hand up on my question pool and then crashes. I've tried copying and pasting all slides to a new file, that just carried the problem to a new file. I moved the question pool to a new file, but publish worked fine with that. I tried deleting the question pool from the project and publish worked the same.
I cleared the Captivate 5 cache, made no difference. The project has no animation or sound, 45 slides with optimized images and ten random question slides. The only demanding feature is a plethora of rollover captions on about 15 of the slides.
I'm not sure what is causing this problem, and I don't have time for it.
Anyone have ideas?

I can't remember the last time I had time for a problem. Does one ever have time for problems?
Anyway, it sounds like you have some element or object in your project (probably in the slides that are not part of your quiz scope) that is either corrupted or making Captivate dizzy for some other reason.
The usual method of fixing this is by trial and error deletion of slides or groups of slides to narrow down the location of the offending item/s.
Do this: Make a copy of your entire problem project and experiment with it:
You say you've been able to delete the entire question pool without fixing the problem. That's good. It means you can start by deleting those. Republish to confirm that the issue still exists.
Now delete the entire first half of your project and republish again.
If the issue is still there. Do Ctrl + Z to replace the slides you deleted, delete the last 50% of your project instead, and republish.
Theoretically, if the issue is anything to do with something on a slide, you should have found deleting the first or last half of the slides would tell you in which half of your project it was.
Once you know which half has the problem, delete the first half of THAT half, and republish again.
Get the picture? I find that on the rare occasions where I've been having this issue, I can find the offending slide in a matter of minutes this way.
Now if doing the above doesn't get rid of the problem, it must be in something that isn't on a slide. The next things to try are turning off the TOC and playbar, turning off LMS reporting (sounds like it must be on because you said the HTML box was greyed out), and not having any preloaders.
Does the problem still remain now?

Can not publish video form ipad 2 to you tube

can not upload video to you tube on ipad 2

what do you try?
what result do you expect?
what result do you get?
in what way does the result you get differ from the result you expect
if I record a clip on my phone and go into pictures and click on the clikc arrow out of square box icon I get the option of tranfering it to youtube

Can't send mail - says gmail server can't be found? was fine yesterday

mac air wont send mail - says it cant connect the gmail server?

it is also showing error 54:conection reset by peer ??

I can't publish to an ftp server. can you help?

Similar Messages

Maybe you are looking for