I can't reach wifi but i see it in my ipad

how to reach my wifi in house with my ipad.
since 6 month no probleme.
today no wifi.
i can see the wifi in my i pad but impossible to plug it in.
signal is there
signal is full 3 bar

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

    My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

    Hi @anthony7722 ,
    Thank you for your query, I will do my best to help!
    I grasp that you uninstalled the Intel graphic driver and the catalyst control.  You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
    When I checked the specifications for your notebook I see that you have switchable graphics.
    Here are two links that I believe will help.
    Overview of Switchable Graphics or Dual GPUs
    Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
    Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
    Please try this process.
    1. Download the chipset driver, and both graphic drivers and save them  but do not install them yet
    2, Delete the chipset driver and install the updated one.
    3. restart your notebook
    4.Delete the Intel driver and install the updated one
    5. restart your notebook
    6. Delete the AMD driver and install the updated driver. 
    You should now have a Catalyst Control Center.
    This should now allow you to use the higher graphic card which should support the higher resolution.
    I hope this helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

    We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

    To clarify for anyone who is still having any problems doing this.
    1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone.  If it's already unlocked skip to step 2.  This works and will work even if you update the phone. 
    1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
    2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
    3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
    4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
    Everything should work flawlessly at this point.  If not let me know and I'm happy to help when I can.  I hope this makes doing this very easy for everyone in the future. God Bless -J

  • My ipod touch can connect to wifi but it doesn't connect to the internet..

    my ipod touch can connect to wifi but it doesn't connect to the internet..how will i fix it??? help?thanks.

    - Reset the iPod. Nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router.
    - Go to Settings>General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • HT201317 I have placed photos in my Photo Stream on my Vista PC, but cannot see them on my iPad or iMac - all set up has been done on each device. Help!

    I have placed photos in my Photo Stream on my Vista PC, but cannot see them on my iPad or iMac - all set up has been done on each device. Help!

    Are you putting the photos in the Uploads folder on your PC.

  • Can connect to wifi but not to Internet

    I had the problem that iPad2 suddenly could connect to wifi, and to 3G for that matter, but got an error trying to acces the Internet (from Safari or mail).
    Tried for hours all the advice foud here and other places, like resetting this and that.
    I had a feeling that it was something blocking on the iPad, not a router problem - all other devices could connect to Internet.
    The solution: I had disconnected Dropbox! - Connecting to Dropbox again solved all problems. Now it's even possible to disconnect to Dropbox without getting problems with Internet access.
    The lesson learned from this: apps can hang up Internet-connection, though they are not even using it!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can connect to Wifi but not LAN internet with iphone 6

    Hello from Australia.
    Ever since I brought my iphone 6 home, I have been plagued with Wifi issues.  All of my idevices have lost internet connection, even though they can be connected to WiFi via Airport Express (2nd gen).
    My internet is a LAN ethernet cable, and usually after connnecting to WiFi (on any device), I get a Login Page from my ISP and I can connect to the internet as usual.
    The new iphone 6 has never been able to bring up the Login Page, but is able to connect to my WiFi network.  My old 4S is also unable to connect, as well as my husband's 4S.
    Can anyone help?
    Thank you.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I can connect to WiFi but not the internet

    I am trying to connect a new IPad 2.  I have a Belkin router that is B+G+N.  I use WPA2 encryption and MAC filtering.  The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email.  When I type any URL in Safari it takes me to my router's management page.  In fact I can log into my router and manage it from my IPad but I can't connect to anything else.  I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's.  This has me baffled.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

    I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

    Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
    While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
    It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

  • TS3718 Facetime:  I can hear the caller but not see them.  They can hear and see me.  What could be the problem.  I am using an I-Pad 2 updated with OS7.

    When receiving a Facetime call, I can hear the caller but can not see them.  They can hear and see me. 

    Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
    While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
    It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

  • How do I change the "You can be reached by Facetime at" phone number on my iPad? It currently shows my iPhone number.

    While I can make outgoing Facetime calls, incoming calls are not received because they obviously go to my iPhone number. I assume I need to change the "You can be reached by Facetime at" setting but cannot see how to do it.
    I am using the iPad with retina screen and have just updated to iOS7.

    Her phone number is in my FaceTime settings as well.  I have logged out and logged back in with my Apple ID, but it still shows here number despite the fact I have verified my number is associated with my Apple ID.

  • My Macbook (lion/ML) can connect to wifi, but gets no internet (only specific network)

    Hi everyone.
    I'm really not the only one having a Wi-Fi problem, but my case may be a little different, so I thought I'd start a new thread.
    I can connect to my Business network, To my home network and to my mobile phone tether connection. All gives 3/3 or 2/3 bars (perfect connection) but only my phone tether connection actually gives internet through. Strangest thing is that all of this happened suddenly. I had a few weeks of perfect internet (I only have this laptop for a few weeks) and suddenly all my Wifi is not working correctly
    My configuration:
    Macbook Pro 15" 2012, non retina
    Mountain Lion, with all updates installed (also happened on Lion)
    WiFi connection
    KPN ZTE 220H Modem/Router
    A few things to keep in mind:
    - This problem started on Lion, but after updating to ML, it hasn't been resolved
    - I can connect with any router
    - But can get only Internet from one specific network (My Phone tether)
    - My home network and the network at my office can be connected, but doesn't gives any internet, nor Ping (terminal) does work
    - Ethernet works perfectly
    I'm not running a 169.*.*.* DHCP
    Ok, besides that.. I've tried quite much any solution.
    - Renewing DHCP Lease
    - Resetting the PRAM
    - Resetting the SMC
    - Network Assistent
    - Network location options
    - Removing all Network devices, applying and readding them
    - Removing the system preferences, clean the bin, reboot
    - Use a custom DHCP, BootP
    Non of all those options work to resolve my Wi-Fi problem. Not even for half a minute.
    Anyone else has a solution?

    Hi; Then this has got to be the lamest Flatypus (Ozzie roadkill laptop), Mate. Drive on: nothing to see, here. Just Pretty; only. Shiny, too; NOT EVEN. Yes there are 12-page forum threads here and elsewhere on the Mac dropping wireless, an issue that must disappear soon (got Mac OS 10.5.6?). The best and brightest Mac programmers are working as we speak, trying to dig out an end-around for the hundreds of dorky ancient pc MS-DOS router scripts, without destroying the magic for Mac-native devices by being encumbered with dross protocols, dumbed down.
    So, have heart; murmur not. Cowboy up, which is American for 'spend more money on the issue' (and, d'oh, spend it on the same people that brought the issue to you in the first instance ...) ... buy a Mac Airport Extreme Base station? Else just keep trying to configure the existing Router; sweet, when you finally troubleshoot this dud and post back ...
    Is your router capable of wiFi "n" even ... may be time for an upgrade, then; something new, and Mac-friendly. Good luck!

  • None of my iDevices can read my iTunes library after an hour of availibility. When I first start iTunes I can read the library, but after about 30 minutes my iPad's and iPhones can no longer access the library. I see it in the shared list, but no access.

    None of my iDevices can read my iTunes library after about 30 minutes. My iDevices lose connection to my library and  I have to do one of the three following things in iTunes to regain connectivity: 1. Restart iTunes 2: Stop / Start Home Services 3: Start playing a song.
    I'ts as if iTunes goes into a background or sleep mode. During the loss of connectivity my iDevices show that there's a library shared, but I cannot connect to it.

    Smae issue here, but I'm unable to get Home Sharing started again (after MAc and iOS restarts, Home Sharing on/off. etc.) This happend a few weeks ago and turngin Home Sharing Off/On fixed the connection issue b/w iPad2 5.1 and iTunes 10.6.1 running on a OSX10.6.8.
    I updated to iOS 5.1.1 on iPad2 today, watched a movie and then about 20 minutes into a 2nd movie I lost connection (Sharing tab in Video app disappeared and has not come back.) The update seems like the culprit, but odd it worked for over 2 hours before stopping, odd I can't get Sharing to work anymore (iTunes see's my iOS devices b/c I can conenct to iTunes to enter my passcod efor connecting the Remote app.) Appears to be an issue with iTunes broadcasting Home Sharing, even thougt it says it is on.

  • Can connect via wifi but not by ethernet cable?

    Hi,
    I'm a bit confused here.
    I have an airport express which works fine and I just bought an airport extreme.
    The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
    I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
    Both airport express and extreme are lit up green and they both appear on the Airport Utility.
    The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
    I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
    Any help is much appreciated!

    The airport extreme is connected to the modem by an ethernet cable
    On the WAN plug, right?
    and the airport express is connected by ethernet cable to the airport extreme.
    Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
    If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
    http://support.apple.com/kb/HT1515?viewlocale=en_US

Maybe you are looking for

  • Why again funtion modules in ABAP OO ?

    if you look at the code inside cl_gui_frontend_services->gui_upload they use gui_upload function. there is no difference. internally the class also uses GUI_UPLOAD .......... there is conflict like data consistancy problem with function module .. why

  • How to Print one PDF document (with several documents inside) at once?

    When I select several emails and convert them into one single PDF file, I would like to know how can I print (hardcopy print) all emails at once, instead of having to select each one at a time to prit it. I have ADOBE Acrobat X Pro V10. Can anyone he

  • Load flat files from S3 into SQL Server 2008 R2

    Hi, We have a few customers dropping files in Amazon S3. Could you please let me know how to load this data into SQL Server 2008 R2 database using SSIS? We are 2008 R2 BIDS environment. Thanks in advance.............. Ione

  • Database size history on Java instance

    Hello, Does anybody know how to get the database size history (db02) on a Java only instance. The system is portal 7 running on SQL 2005 and windows 2003. Thanks

  • Without giving the path - file is transfereed using gui download

    i use GUI download to download the internal table data in the path specified by the user. But there is a strange behavoir in this. i havent given the file path to download. But i have given only the file name (notthedrive say In the file output path