I can´t read my external Hard Drive Anymore

Hi, I just got a new Imac, the slim 27 in. one, I connected an external Hard disk to it and everything fine for the first two / three days. Now It won´t even recognise it, the light on the HD is on but there´s no sign that the computer is reading it. I actually have the same problem with my Mac Book Pro, at first it read my Hard Drive and now it doesn´t recognise it. i did the Hard disk utility and I got nothing.
Please Help!

You can try to do a Intel iMac SMC and PRAM resets several times, if that doesn't work then try another cable. If the new cable doesn't work your EHD may have failed.

Similar Messages

  • My time machine back up error and now it says it can not read my external hard drive

    I have a MacBook Pro Yosemite ...... I was backing up to a WD Elements external hard drive disk and I was in mid back up and everything was going fine..... then an error and when I went back to it ..... it said it no longer can read my disk? What can i do?

    A  whole  lot  about  Time  Machine for help with TM problems.  Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM.  See also Mac 101- Time Machine.
    Use Disk Utility to repair the TM drive.  If that doesn't help, and you don't find help from the above, then erase the drive and start a new TM backup.

  • Mavericks 10.9.4 can't read my external hard drive which worked before the update

    My external hard drives worked perfectly (paragon NTFS for Mac) with Mavericks after I updated it to the last version.
    One more problem...wi-fi is not steady, connect and disconnect all the time.
    Thank you for your help

    Does it show up in disk utility?

  • Mac is saying it can't read my External Hard Drive

    Somehow I have lost the partition on my hard drive due to corruption. The drive supports FAT 32.
    When I connect to the Mac, it says that the volumes on the disc cannot be read by Mac. These files were all added to the hard drive using an older mac. I need to be able to connect to the drive and access the files that are already stored on it.
    Can anyone help me with this? I am a little lost when it comes to this.
    Thanks,
    Andrew

    An external HD consists of two primary components - the actual drive itself, no different than you might find inside your system and a drive enclosure.
    The enclosure provides the interface (USB, Firewire, SCSI, SATA, whatever) and power supply (unless it is a 2.5" bus powered drive) that communicates with your computer's port of the same type.
    Mounting is what a UNIX based computer system call recognizing a drive as available. OS X has BSD UNIX at it core, and common UNIX commands are available via the Terminal utility provided with the OS.
    If your computer can not recognize the drive and wants to initialize it, and reports the size of the drive correctly, the enclosure is not your problem.
    If OTOH, it is not "seeing" the drive, it might be a problem with the enclosure.
    It sounds as though we are dealing with the first case - the drive is mounted, but the computer does not detect a valid file system on the drive. FSCK might, I emphasise MIGHT, restore the extant file system to health, but if the partition table on the drive is blown, it will not. I will go out on a limb and say you don't have a valid copy of the partition map, so you can't just rebuild it - few if any folks would have that.
    If you care about the data, your best bet is the Disk Warrior program I referenced earlier. If that won't help, you could go the commercial data recovery route, but be prepared to spend mega bucks for a quality job.

  • How can I get my new Mac book Pro to read my external hard drive?

    I have recently upgraded to the new MacBook Pro and have a new 2T external hard drive. I used my old MacBook Pro to transfer all my files from my old 1T hard drive of the same make to the new one. This all worked without isssue and I can open the ne external hard drive on my old Mac but my new Mac is reading it. It does not show up in finder at all but it does show up in Disk Utility. Any suggestions? Do I need to do something on my new Mac for it to be read? The new Mac has no problem with the smaller USBs I use.

    How do you have Finder Preferences set?
    Ciao.

  • Why can't iTunes play music from read-only external hard drive?

    I have a write-protected external hard-drive which I keep all of my iTunes media on. iTunes recognizes all of the files, including the metadata on the id3 tags, and can find the files in Windows Explorer. However, it cannot play the files while the drive remains write-protected. Is there a work around for this as I would prefer to keep the hard-drive protected? Why does iTunes require write-access to play songs? Other media players have no problem playing from my read-only external hard-drive. Thanks for any help

    Welcome to the Apple Community.
    When you say you can't play through both devices at the same time, what happens when you try, are you able to select multiple speakers, do they deselect themselves, do you not get the option or does it just not work when you select multiple speakers.

  • My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

    My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject.  I was using a cord that went from larger square plug to larger square plug.  So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

    Thanks, Michael!  I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed.   Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
    Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk.  Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait.  :-) 
    Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed? 
    I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest?  Two external hard drives?  I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB.  If this one is not reparable I could get two and do the same thing.  I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
    What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

    can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

    Yes. Windows supports external USB drives.

  • Can I use one external hard drive for 3 of my Macs?

    I have a 2007 white MacBook, a 2011 MacBook Pro, and a 2013 MacBook Air.
    I want to be able to transfer all of my precious family photos off of my MacBook and Macbook Pro onto an external hard drive and then wipe those computers clean, and then I want to be able to backup and wipe clean my Macbook Air so that I can update it to Mavericks.
    Can I use one external hard drive to do this for three of my Macs? Will it be compatible with all of them? And will I still be able to use the hard drive with my Air once it is updated to Mavericks?
    Which hard drive do you recommend?

    1. Yes. Note that anything you want to keep should be on at least two drives in case one of them fails.
    2. Yes.
    3. Yes.
    (110959)

  • Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

    can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?  in apple tv 3 and 2?
    That  i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive,  i dont want to see then  whit the streaming and icloud, or used my  laptop o pc for access de movies and stuff.
    i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
    if i can´t  connect a external hard  drive, wich others media players divices you know that can see itunes movies?
    ¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
    lo que no quiero es usar  la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
    y de no poderse conectar  que otros dispositivos media pleyer conoces para ver peliculas de itunes  en la tv?

    Welcome to the Apple Community.
    can i connect a external hard drive to apple tv 3 generation
    Unfortunately not.

  • Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • I can't find my external hard drive in FCPX

    I can't find my external hard drive where I have all my old events and projects. In Finder it shows but not in the latest version of FCPX. I am full updated with FCP and Mavericks
    Any Ideas?

    Please check this out:
    http://support.apple.com/kb/HT5958
    http://fcpx.tv
      Take your time and read the above. FCP X will create a new Library comtaining your Projects & Events, but read the above first.
    File/Update Projects & Events/Locate

  • If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
    (66017)

  • Can you unplug the external hard drive you are using for time machine

    can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?

    Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

Maybe you are looking for

  • My iPhone 5 will not automatically connect to my home wifi

    My wifes iPhone 5 will not automatically connect to our home wifi, she has to log in each time (she has ios 6.1.4).  Mine, however will connect automatically with no issues (we have same phone and ios).  Here is what I have done so far to fix the iss

  • Load balancing host named site collection

    I am jumping into the realm of host named site collection. While the learning experience has been good, still there are some questions unanswered. Please bare patience since my questions are long. - I have a non host header site on port 80 that has h

  • Total in order documents

    Hi, Im trying to add an order document using the DI API.My problem is that i can't display the DocTotal and the LineTotal ...i select these properties after the add() , and it displays 0 always ... here is my code: long RetVal; int ErrCode; string Er

  • "E-mail report" feature doesnt work as it supposed to ?

    hi, I've created a custom public report in OEM and i'm scheduling it with email sending. However, the mail i'm receiving is: From : wrong value -> it contains the value from 'reply to' field in the schedule folder the content is just a link to the OE

  • How to invoke the shutdown event tracker when running restart-computer

    In Windows command shell, it is possible to run shutdown /d to specify a reason code and /c to enter a comment into the shutdown event tracker to log why a shutdown was being performed. I'm not seeing an equivalent parameter for the restart-computer