I can't read or hear the captcha code to set up firefox sync
I am trying to setup Firefox Sync but cannot read or hear the Captcha security code properly and keep getting errors.
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.
Similar Messages
-
New iPhone 4S. Attempting to use face time but it wont show the person I am attempting to connect with. I can see myself and hear the other person while attempting to connect to face time but cannot see them. Face time was working before.
Hello Wollyt
Check out the article below for troubleshooting FaceTime issue.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!
Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling -
Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?
Only the carrier it is locked to can authorize unlocking it. Sounds like the phone was hacked to unlock it originally. Find out what carrier it is locked to, and look up their contact information using google or the search engine of your choice.
-
Can you read books on the ipad in direct sunlight
can you read books on the ipad in direct sunlight ?
Not very easily no. If you can get a non-reflective screen cover it might be a bit better, but it probably still won't be as good as, for example, a Kindle device is.
-
Every time I connect it to sync it says it's been sync'd with another library and do I want to erase and sync w/ the current itune library.....it has never been sync'd with another itunes library....just this one on my mac. When it starts to sync and says that it can't read/write to the ipod. I've restarted it, reset it and made sure my itune is the most recent. HELP.
When you still have the problem after restoring to factory defaults/new iPod then you very likely have a hardware problem and an appointment a th Genius Bar of an Apple store is in order.
-
How can I read epubs on the iMac?
I wanted to know how can I read epubs on the imac. I know for the ipad you can use apps like ibooks. Is there something like that for the imac?
Calibre (FREE)
http://www.macupdate.com/app/mac/30657/calibre -
Test whether data can be read successfully from the SLD
1. Test whether data can be read successfully from the SLD
This test attempts to read the number of business systems defined in the SLD. If this attempt fails, the test is considered to have been unsuccessful. If no business systems are found, the system gives a corresponding warning.
Could you plz give the navigation steps to perform above test ??
thanks
kumarGenerally SLDCHECK is the transaction used to test the connectivity to the SLD from your R/3 system.
Use the function module LCR_LIST_BUSINESS_SYSTEMS to get the list of Buiness systems configured in SLD.
***Reward points if useful.
Regards,
Kiran Bobbala -
I set up Firefox sync from my old computer. This has had its hard drive replaced and been sold. I now want to retrieve the information and get my bookmarks on my new computer. I can't see any way to do this!
Help pleaseTo build on the second option provided by The Edmeister make sure that you have your Sync Key, if this is not the case Firefox Sync will not help you (data is encrypted with that Key).
Finally, if the last sync happened long time ago, it may be the case that your data is not on the servers anymore. Firefox Syn wasn't designed as a back up service. -
The CAPTCHA code is not showing up for any website.
The captcha code isn't showing up for Firefox or IE9. I have tried clearing my cookies, going to safe mode, disabling plugins, pressing check "show pictures", everything. The captcha isn't working for any site. Please help.
Many times the CAPTCHA is hosted on a different server, in other words, it's a "third party" image. If your security/firewall/privacy software blocks third party images because some of them are likely to be web bugs, try turning that off to see whether it is a factor.
-
Session cookie - Servername info - can it be done in the application code
HI all,
Scenario:
2 managed servers in a cluster. Application is deployed on the cluster.
Requirement:
Application needs to send a cookie to the user with server info.
Question is regarding session cookies. Can the application retrieve the server name (for example ManagedServer1) from which that request has been processed and send to the user in the cookie.?
Request->process->Response with cookie containig the server name it was process by.
Can it be done in the application code?
/SR
Edited by: Shashi_sr on Feb 4, 2011 4:37 AMHi SR,
You can get the server name using the following technique:
/* Getting the Server name from System Property */
String serverName=System.getProperty("weblogic.Name");
/* Adding the value of the Server Name in the Cookie*/
response.addCookie("serverName",serverName);Like you can see by yourself using the JPS utility how WLS sets its server name as a system property using the following link
Topic: Using Jps.exe to distinguish WLS ProcessIDs And Server Name
http://middlewaremagic.com/weblogic/?p=2291
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic… -
Selecting clips by timecode? Can I do this? The time code is backwards, it counts down instead of up (duration) like it should. Selecting clips by timecode? Can I do this? The time code is backwards. I have a video project where i need to select several clips based on their timecode. I want to also sent the playhead to a exact spot on the video. Thanks.
It is unfortunate, but there is only one way that the Time Capsule can connect to the BT Hub, and that is by using an Ethernet connection to the WAN port on the Time Capsule.
That could be either by running an Ethernet cable from the Hub to the Time Capsule.....or......if that is not possible, then you might be able to use a pair of Ethernet Over Powerline (EOP) Adapters to send an Ethernet signal over the existing AC powerlines in your home.
The theory with EOP is that you already have the wiring in place, you just need the adapters. In practice, things do not always work as well as the theory might suggest, so if you decide to try a pair, it would be a good idea to understand the store's return policy in advance before you buy. BT might even offer these devices, so check with them first on this.
If the EOP adapters do not work well, then your only option after that would be to move the Time Capsule close to the Hub and connect the Time Capsule using a normal Ethernet cable of any length that you choose.
I read today that I can access my time capsules data via back to my mac from anywhere in the world.
Back to My Mac (BTMM) assumes that it is the Time Capsule that will be the "main" router on your network.....not another router....which is the Hub in your case.
Unfortunately, you should not expect BTMM to function correctly unless the Time Capsule can be set up as the "main" router on your network.....which is likely not possible in your case. You would need to discuss that subject with the BT support folks. -
hi, i downloaded the creative suite and installed the trial versions of the programs (Photoshop etc.). when i try to insert the alphanumeric code to set it regularly operative it doesn't let me digit letters so that the code lies incomplete and the obtainment of the licence fails. how can i solve this disfunction?
The alpha numeric code is the redemption code which needs to redeemed by following the steps in http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
This shall help you to use the CC .
Regards
Rajshree -
What is the transaction code to set the download directory?
What is the transaction code to set the download directory?
SO21 is the Maintain PC Work directory transaction
Cheers,
Ben -
My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?
if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
like this the detector just is stuck in the opposite way
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
iphone stuck in headphone mode
Maybe you are looking for
-
How can I drag multiple photos into a new iPhoto library from search box?
I lost but found my list of photos that were in my iPhoto library. I am unable to drag more than one photo at a time from the search box into the new iPhoto library box. Am I doing something wrong or do I have to drag one at a time? (That would take
-
Hi All, i need an expert advice in this matter, and if possible please explain with some code/example.Here is the situation. This process will read all records in the STAGING_TABLE and process the data into the MY_DATABASE tables. STG_ID will be used
-
hi i am using OS 10.8.5 i have a problem moving items to trash when i move a specific thing to trash it deletes from that folder but does not appear in trash and my hard drive space is not getting free i am a new user to mac kindly help me out
-
How can i install flash for android 4.2 to my nexus 4?
i have tried to download and install flash for android to my nexus 4 and after following the instructions at the at the archived version page i can not find 4.2. i have tried the 4.0 version with no sucess. this is less than easy to do. why can't th
-
itunes 10.5.0.142 is awful. Cannot burn discs. How do I revert back to 10.4?