I can't receive calls.. and the help stuff on my phone doesn't, well help.

So I tried calling my cell with my house phone to see what the difference in ring tone would be with Out of Holster and in Holster (which I still don't know) and it said that the number I have called is not in service when clearly it is because I can make calls. I forgot how I did it but I kept calling I heard the voice mail message thing I made. I checked the help thing and it didn't help at all. It says I should turn off call forwarding and blocking but how it says to go in my Options isn't correct. Like, the setting isn't where it says it will be in the step by step directions.
I was hoping someone had the same blackberry (pearl edge 8220 I believe). That or someone who's familar with my phone cos I'm not very phone savvy.I shudder to think of how many calls I've missed..
Please help!
Thanks in advance.
"To get back my youth I would do anything in the world, except take exercise, get up early, or be respectable." - Wilde

Press the GREEN dial key to enter your Call Log.
Then press the Menu key > Options > Call Forwarding, etc., and proceed with your given instruction.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Residential phone: we can call out, and we can also receive calls, but the phones don't ring...

    this just started today, sometime after 9am. working fine before then, and we didn't touch anything re: the system today.
    behavior:
    - we can call out fine
    - people calling in say it just rings & rings
    - we have no idea that someone is calling unless we happen to be looking at the CID of a plugged in phone
    - we can pick up the phone and have a conversation if we happen to catch it at just the right time
    - same behavior at the NIC or whatever it's called (the box in the garage).
    tried: 
    - i've unplugged our main wireless phone and tried it w/a wired phone, no change 
    - i've unplugged our verizon broadband modem, no change
    we have a tivo that uses the phone line; i'm about to give that a shot. 
    this is really bizarre...
    thanks for any ideas,
    scott.

    Sounds very strange! I hope your house isn't haunted. =P
    Message Edited by CharlesH on 12-18-2008 09:52 AM

  • My iphone wont turn on but i can still receive calls only the screen stay black and the home and off button wont affect it

    I used my house phone to call the iphone to see if it will help and my iphone rang but i couldnt do anything about it. The screen just stayed off  and the home and on/off button wont affect it.

    Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

  • What do I do if my camera and the lock button on my phone doesn't work?

    I cracked my phone and my dad tried to fix it but instead he broke my camera and tried to fix it but instead he also borke my lock button.

    Viber bottom doesn't work and also volume bottoms + and - doesn't work.
    You have hardware issues (buttons don't work) that can't be solved on a forum.  If still under warranty, return to Apple.  If not, search for iPhone repair in your area.

  • IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational.

    IPHONE 5:  can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off.  ATT went through the standard protocol - resetting network, resetting sim card, etc.  No changes.  Other phones working fine in same region with same carrier.  Apple's solution is to restore software, but haven't gone there yet.  Anyone successfully addressed this/these issues?   

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • Iphone4 bought from australia under a contract.unlocked. now  in India trying to use .but whenever I make a call it shows call failed. can  receive calls and send/receive texts. ??

    Hi I have an iphone4 that i bought from australia under a contract.I got it unlocked from there and now I am in India trying to use the phone but whenever I make a call it shows call failed. I can however receive calls and send/receive texts. ?? Please help

    Hi I have an iphone4 that i bought from australia under a contract.I got it unlocked from there and now I am in India trying to use the phone but whenever I make a call it shows call failed. I can however receive calls and send/receive texts. ?? Please help

  • I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS, iOS 3.1.2. Thanks

    I have tried to restore my old iPhone 3, but when i tried the itunes logo and a pic of a USB cable have come up on my phone and now i cant do anything with my phone.Any ideas how i can fix this? I can make/receive call. iPhone 3GS(Ireally don't remember if it's a 3G or 3GS), iOS 3.1.2. Thanks for your help

    please help me!!!

  • I have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music soung , game sound.

    i have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music song , game sound.
    i have tried to clean the audio jack too but result is the same. Can any body help me please.

    No external sound or not sound at all - external or when using the earbuds?
    Standard troubleshooting steps in order are; power the iPhone off and on, Reset by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, Restore.
    i had it once before, restored the iPhone and it was solved, but i don't want to restore my iPhone every day.
    Does this happen every day? If not, when was the last time this happened?
    If you have sound when using the earbuds, another thing to try is insert the earbuds and start playing a song - making sure the sound can be heard with the earbuds. Without pausing the song, remove the earbuds.
    If no sound is available with the speaker and a the troubleshooting steps do not resolve it or one of the steps does resolve it but the same occurs again, time to give AppleCare a call (800) 694-7466 or make an appointment at an Apple Store if there is one nearby.

  • Good day Friends. My phone loses signal when I receive calls and people do not listen to me at times.   I bought my phone used by Amazon and I think it was open, because I see that this manipulated by one hand.  Someone I can help.?

    Good day Friends.
    My phone loses signal when I receive calls and people do not listen to me at times.
      I bought my phone used by Amazon and I think it was open, because I see that this manipulated by one hand.
    Someone I can help.?

    nessbass wrote:
    people do not listen to me at times.
    That's not a phone issue, but rather that they simply find you uninteresting.
    nessbass wrote:
    I bought my phone used by Amazon and I think it was open, because I see that this manipulated by one hand.
    Amazon is not an official reseller.
    If the device has been opened by anyone other than Apple the warranty is voided.

  • I recently changed my password for my Apple ID and now I can't receive calls on my iPad or Mac.  All devices are signed on with the same iCloud account.  Anyone have the same issue?

    I recently changed my password for my Apple ID and now I can't receive calls on my iPad or Mac.  All devices are signed on with the same iCloud account.  Anyone have the same issue?

    Hello!
    On all of these devices, go to: Settings > iCloud and make sure they're updated with the new password. If you're talking about Macs, go to: "System Preferences > iCloud" too.

  • I can't make calls from my iPhone 4. But I can receive calls and browse the Internet on it.

    I can't make calls from my iPhone 4 but I can receive calls and browse Internet.

    Surprise!!!!!! Phone won't make and accept any calls :)))), mine works the same. Soft failure, did everything for 2 weeks.

  • I can't make a call but i can received calls and send text messages its say you cannot make a call check the phone settings!

    i can't make a call but i can received calls and send text messages its say you cannot make a call check the phone settings!

    It is not a cell phone.

  • IPhone 5s can't make or receive calls and replaced SIM card

    need help can't make or receive calls and got SIM card replaced twice

    If the carrier cannot help you, then I would make an appointment at the Genius Bar of the nearest Apple Store to have the hardware checked. I really do not believe it is the hardware.
    You could try a restore before going to the Apple Store. Make sure you have a backup of the phone and restore the device as new. After activation is complete, see if you can make a call. If it is possible, then restore your backup to recover your content and test again. If it fails, then it is a problem with your backup. If neither works, and the carrier cannot help, then make the appointment.

  • I can't open my Missed calls, Received calls and D...

    I can't open my Missed calls, Received calls and Dialled numbers in my Nokia 5800 XpressMusic.
    Can someone help me ?
    (I am new here )

    Thanks Diavonex. I have downloaded OPlayer HD Lite and it works fine. The files are WMV files.
    Thank you for your help. You should get a job with Apple Support.

  • My iPhone 5 has lost network coverage. Wifi is still ok just can't receive calls or text messages (iMessages are ok though? ). I've re set network settings but that hasn't helped.

    My iPhone 5 has lost network coverage. Wifi is still ok just can't receive calls or text messages (iMessages are ok though? ). I've re set network settings but that hasn't helped. Has anyone else come across this? Thanks!

    Hey K1978,
    Thanks for the question. I understand that you are having cellular connection issues with your iPhone 5. The following troubleshooting assistant may help to resolve this issue:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_1
    For more in-depth troubleshooting, see the following article:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    1. Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    2. Restart your iPhone.
    3. Ensure that your software is up to date:
              - Check for a Carrier Settings Update. Tap Settings > General > About.
              - Check for an iOS Software Update. Tap Settings > General > Software Update. Note: Some updates may require a Wi-Fi connection.
    4. Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    5. If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    6. Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    7. Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    8. Restore the iPhone as new.
    9. Contact your carrier to:
              - Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
              - Verify that there are no account-related blocks.
              - Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
    Thanks,
    Matt M. 

Maybe you are looking for

  • GPO with a startup script is not working.

    I have a GPO that I have added a ".bat" script to the "Computer Configuration\Windows Settings\scripts\startup/shutdown" section. The batch file is located in the netlogon folder. This script was part of another Old GPO that I want to consolidate int

  • Acrobat form field that allows Reader user to browse and insert a picture into a predefined area

    Is there a way to do insert a form field into an AcroForm that allow Reader users to browse and insert a picture into that form field? I know that LiveCycle can do this, but I need to do this using an AcroForm. Or maybe there's a third-party plug-in

  • VC 7.0 Oracle stored procedures resultset with ref cursor

    Can VC (we are on NW7 SP13) handle Oracle's datatype ref cursor - which is the standard solution in Oracle to return result sets - as the return value of a stored procedure? When testing a data service in the VC story board based upon a simple Oracle

  • Signal for non-child process death

    I am porting an NT system to Solaris. One process (HM) is responsible for starting groups of server processes, monitoring for death of a process, stopping/restarting/recovering the group. I know how to port this using fork/exec to start processes and

  • Automatic logout after lock screen for long time?

    When I leave my mac screen locked for long time, sometimes I see the following message after unlocking screen: "Logout has timed out because the application [x] failed to quit...." Where [x] is some application trying to quit, and is waiting for user