I can't recover my A505-S6960 from Recovery partition!!! HElp !

I push "0" when power on my nbook, go to Recovery partition BUT there is Error
"Error F3-FF00-0006
Failed to get the ID of the specified partition
Please press ok to turn off the computer"
And in the other programs that launch from DOS for example Acronis True Image, disk doctor there error "there is no HDD
HELp!!

it happened to me once...
getting the F3-F200-0002 when I turn on my laptop...
tried to run the recovery by holding down "0" then it gave me a different error...
F3-FF00-0006 Failed to get the ID of the specified partition.
I sent the computer in for repair and got it working again.
oOo
*Read EULA before installing any software.
√

Similar Messages

I want to setup Lightroom on my new laptop. I have my latest serial number but it is the upgrade serial number for LR5. I do not have the original serial number from my purchase of LR3. How can I recover the serial number from my original purchase of ?

I want to setup LR on my new laptop. I have the serial number from my latest purchase but not the original purchase of LR3. How can I recover the serial number from my original LR purchase?

If you did register it back then, open your Adobe account with your Adobe ID and you will find it there: Find your serial number quickly
If you still have it installed, open the System info in Help menu or look here:
C:\ProgramData\Adobe\Lightroom\Lightroom xy Registration.lrreg

Can i recover a deleted download from my iPhone?

can I recover a deleted audiobook from my iphone via itunes?

If you have the audiobook in iTunes on your computer, then you can just sync it back to your iPhone. If, however, this is an audiobook purchased from the iTunes Store and it's not in iTunes or a backup, then it's probably gone. Audiobooks are one of the few items for which redownloading is not available. If you indeed have no backup copy anywhere, then you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store and request a redownload. They may well refuse. though.
Regards.

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
        retfield        = 'FLD2'
        value_org       = 'S'
      tables
        value_tab       = It_VALTAB
        return_tab      = It_return
        dynpfld_mapping = It_dynpfld
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    else.
      perform get_selected_fields tables It_return.
    endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
        la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
    la_fields-fieldname = <fs_return>-retfield.
    la_fields-fieldvalue = <fs_return>-fieldval.
    append la_fields to lt_fields.
    clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
    tables
      dynpfields           = lt_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

I remember my apple I'd but I forget my security question and password then how can I recover my apple I'd pls. Help.

I remember my apple I'd but I forget my security question and password then how can I recover my apple I'd pls. Help.

Call Apple to reset your Security Question.
http://support.apple.com/kb/HE57

Install from Recovery partition after upgrade from 10.9

Hi all, on my MacBook 13" nov. 2012 I upgraded from Mavericks to Yosemite using the standard upgrade.
After a couple of days I decided to perform a clean install:
- formatted "Macintosh HD Partition"
- rebooted with cmd+R
- reinstalled from recovery partition.
Is this really a clean install or my recovery partition contains pieces of the old Mavericks?
Thanks in advance for answering
Paolo

paolo_italy wrote:
First I upgraded from Mavericks to Yosemite (with no erase). Then I booted from recovery partition, erased Macintosh HD partition and installed Yosemite.
My question is: did I perform a really clean install or to be sure I had to erase the entire disk and recover from the Internet?
Paolo
You performed a clean install of OS X Yosemite.
You were in the Yosemite Recovery HD.
You erased the Macintosh HD which erases the previous OS install, user accounts and data files -- everything! Then you reinstalled JUST OS X Yosemite.

During recovery from recovery partition I get message "INF file txtsetup.sif is corrupt or missing

During recovery from recovery partition I get message:
INF file txtsetup.sif is corrupt or missing, status 14.
Setup cannot continue. Press any key to exit.
Now I have a computer with a recovery partition and that's about it.
The C partition has been formatted by recovery and files have been copied but I can't get any further.
The computer is an nc6220 and the OS, if the recovery would work, is winXP pro.
Anyone have any ideas ?

I assume you ran recovery from the hard drive?
If so,
I would run a chkdsk on the recovery partition it may fix the sif file corruption.
You can do this from a XP boot cd using the command prompt, you just need to run it on the recovery partition instead of the C drive as explained in this article.
http://kb.wisc.edu/helpdesk/page.php?id=5097
if you use the
map
command, it will list all the partitions and the drive letters
so the command might look something like this
chkdsk /r D:
D: represents the recovery partition, which may be different than D:

Unable to reinstall Mountain Lion from recovery partition

Hi there,
   I have formatted my main HDD partition and then boot from recovery partition. I have a MacBook Pro 2011 series. I have reinstalled my Mountain Lion following on screen instructions. But when It's says is OK and 100% installed and begin restart the system, it is unable to boot and automatically boot from recovery partition again.
   Can anybody help me? What I have to do?
   Thanks in advance.
   vzuritae.

Why did you start this process in the first place? Was there something wrong with the original install of Mt Lion? Like your system wouldn't startup anymore?
I suspect it is a hardware problem and may be the drive is failing.
Is your Mac a Early or Late 2011 model. Did it come with Lion Pre-installed?
If it came with Lion Preinstalled then you can use the Online Internet Recovery system to first reinstall Lion. At startup hold down the Command+Option/Alt+r keys until you see a spinning globe in the center of the screen. From that screen select Disk Utility and Re-Partition the drive as One partition. Then close DU and select Reinstall Mac OS X. If after the install of Lion is downloaded and finishes the install your system still refuses to boot up properly then you have a hardware problem and only Apple can fix a hardware problem.

Reinstall Mac Os X 10.9 from Recovery Partition

Hi, I have some problems with my Os X, and I want to reinstall it from Recovery Partition. I'm wondering, will I lose all my files after reinstalling?

If you erase and install OS X, you will lose all your data.
If you reinstall OS X, theoretically speaking, you should not lose any data. But there is no guarantee.
You should have a backup before undertaking any such action.
Best.

Can I recover my data information from excel file?

For any reason I already lost (clear all) my data information, have any option where import the data information from excel file to view responses sheet? or , how, can I recover my data information?
Antonio

If you had saved your Excel file, then you may revert the Excel file to the last saved version. Follow below steps to do this:
On the File tab, click Open.
Double-click the name of the file that you have open in Excel.
Click Yes to reopen the Excel file.
If you had not saved Excel file, then follow below steps to recover your file.
Click the File tab.
Click Recent.
Click Recover Unsaved Workbooks.

Can´t recover all my mails from Time Machine

Hi!
When I upgraded to Yosemite I did a backup with Time Machine before. After the upgrade I had some issues with my mail accounts. I already figured it out but trying different things I erased a pop account. When I added again, I lost most of my mails from that account. I talked to the server´s owners and they told me that the account is pop so the server doesn´t have a backup of my mails.
I have a backup with Time Machine, but it does´t let me recover mails from before the day I erased and added the account again, so when I recover mails I only recover a 10% of them.
Does anyone know how can I recover all my mails? I assume that they must be on the backup, right?
Thanks!!

Welcome to the Apple Discussions. Try restoring the library as a whole, keeping both copies. Then open the restored version with iPhoto. That will have all your albums, keywords, titles, slideshows, etc. that existed at the time of the TM backup.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How can I recover time machine backup from previous iMac?

How can I recover some datas from a Time machine backup regularly done with my old imac,using now my new i7?
Problem is that when I open timemachine app,it's not giving me any chance to go "back" in the past snapshots of my desktop nor giving me any errors.So I suppose I'm doing something wrong
Any help?
Thanks

It's TimeMachine,
http://web.me.com/pondini/Time_Machine/Home.html
https://discussions.apple.com/message/16276201#16276201
http://www.macupdate.com/app/mac/29553/back-in-time

Can I recover a deleted iMessage from my iphone

Is it possible to recover a deleted imessage from your phone ? What about a photo ? I know emails are in the trash and can be recovered but the others are not so I wondered if they are somewhere I do not know. Thank You Fran

You can recover your iMessage directly from your iPhone.
However, since it has been such a long time, your deleted message can be rewrittened by other data.
That's very pitiful. If you tried iPhone Data Recovery before, you can get your iMessage back.
It just takes 3 steps to recover deleted iMessage.
Step 1 Connect your Device and Choose the Recovery Mode
Step 2 Enter DFU Mode and Scan for Deleted iMessage
Step 3 Preview and Recover lost iMessage

Help, How can I recover my lost photos from my iPhone 4 without backup?

I have a lot of photos stored in my iPhone 4, but yesterday, I pressed the wrong button and my entire photos was deleted, very sadly. There are many import photos that stored for 1 year. I hope to recover them backup, I tried many data recovery tool, but it won’t recognize my iPhone 4, why and how can I recover my sms? If there any other tool can help? Thanks.

Even if you haven’t backed up your iPhone with iTunes manually, iTunes might have backed up it automatically each time you sync your iPhone with iTunes. If you have enabled iCloud, every time, your iPhone is connected to Wifi and a power source, and the screen is locked, iCloud will automatically backup your photos. So try to restore the deleted photos from iTunes or iCloud backup first if the backups were created before the deletion.
http://support.apple.com/kb/HT1766
If you don’t want to restore your iPhone with an out-of-date backup, erase all the content and settings on your iPad, and go back to an older iOS version, try to extract your iPhone photos from your iTunes or iCloud backup with the iPhone backup extractor.
Other than restoring from iTunes or iCloud backup, there are still at least 3 other solutions for you to recover deleted photos from iPhone:
Extracting from previous iTunes backup;
Retrieving directly from iPhone;
Copying from other backups.
As for recovering SMS, see this iPhone SMS recovery tutorial.

Can I recover my iTunes Music from iCloud?

Can I recover my iTunes Music and Movies from the iCloud?... with my recovered MAC Pro (been disconnected for 2 years) - Snow Leopard.
MANY THANKS FOR ANY ADVICE!
Background/context:
My MAC Pro (2006 model) was lost and now recovered but without the hard disks. The backup drive containing the iTunes Library was also lost. I do have a backup (Clone) of the startup drive which works and shows the previous folders/playlists and smart playlists. My question is whether I can recover my previous music from the iCloud as I was previously not able to do this with the new iMac possibly due to not having the startup drive (?).

Downloading past purchases from the App Store, iBookstore, and iTunes Store

I can't recover my A505-S6960 from Recovery partition!!! HElp !

Similar Messages

Maybe you are looking for