I can't register for the Add-Ons-Personas Forum. It keeps giving me a "Forbidden" error. What should I do? Thanks.
I was registered with the Personas Google Group which said it had moved to the Firefox Add-Ons section. My sign in for Google Group does not work and I cannot register with the Add-Ons Forum. I simple have a question regarding Personas as I am a designer. Thank- you for your assistance.
Post in Microsoft's Powerpoint (Mac) message boards.
Similar Messages
-
the box is located under the icon line at the bottom of the screen and above the window tool bar/icon box ! its almost like im running in a wide screen mode ! i cant seem to find a way of making the screen deeper, so it fills all the available space ! its also . freezing and it messes with the add ons and the adobe plugins ! a real shame cause i think the new layout is great . kep up the good work
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
I have already seen some suggested solutions to the problem of this extremely annoying Yahoo DNS error solutions page, but they involve going to the add-ons page of firefox and disabling various add-ons. The issue is that even when I try to go to the add-ons page I get immediately redirected to the Yahoo DNS solutions page again.
I have cleared my browser history and cache, hoping it would help, but nothing. Extremely annoying as I never installed anything - it simply started after a Firefox upgrade.
Any help much appreciated.Open the Help menu and choose Restart Firefox with Add-ons Disabled. Remove any offending extensions. For details, see the "Uninstall from Firefox Safe Mode" section of the following article.
* [[Cannot uninstall an add-on]] -
Hello,Where can I find the details for the add-ons I purchased on my bill?
Good afternoon, I was in France for two days in July and purchased the following adds-on, £2 for Euro Talk and Text Unlimited for one day : purchased twice£3 for 24 hours 3G browsing with 500MB data : purchased twice As those were purchased during a work trip, I am being refunded by my company. However, they need the receipts for those in order to process the refund and they do not appear on my latest bill. Please could you kindly advise on how and where to find the billing details for those adds-on? Many thanks.
Is your latest bill before or after your purchases? THey should be in your next bill
-
hi,
Are the images required for the new add-ons site of the same size and formats as previously applied to the Extensions Exchange? If not, can the (neat) original Adobe Exchange Assets template (Photoshop file) be updated? And, how about animated gifs?
Thanks,
JohnHi John and Royi A,
Yes we definitely want to offer larger preview images and we also plan to support video from popular video sites like YouTube and Vimeo. No plans for animated images currently but the video support means you can go much further with animation if you wish. One of the things we are trying to decide is whether to support HiDPI/Retina images. Of we do that we need to ask for double the resolution. So let's say our image requirement was 1280 x 800 px, you would have to submit a 2560 x 1600 px image for each preview. Of course double the resolution also means roughly double the load times per image so it's something we are not sure about but right now I think we won;t support HiDPI/Retina previews just yet but as more uses go to higher resolution screens we could add that support. anyway, your input and of course other producers and users input would be valuable here.
Thanks,
Jonathan -
sometimes I can dowload add-ons. I've tried switching btw default and android galaxy tab in the prefs but still no go
It sounds like you are using the Phony add-on to change your User-Agent header. It definitely needs to be set to "Default" for the addons.mozilla.org site to work correctly.
After setting User-Agent to "Default", try going to http://addons.mozilla.org/mobile - you were probably redirected to the wrong section of the site if you originally loaded it with a different User-Agent header. -
Hi,
I bought MacBook Pro in Sep/2012. I did not buy the warranty at the time of purchase. Its 1 year 4 months of the purchase now.
I lately came to know, that we cant register for apple warranty if we dont purchase it earlier.
However I want to get my Mac covered under the apple warranty. How can I do so. Please guide & help.
Thanks,
AnitaThis procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls *.{crash,hang,panic} | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I cannot remember the answeres to my security questions, please help.
You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105959) -
My email I use is <![email protected],--> ..... <sub>(edited out ~J99)</sub> but I did not receive an email to register it. this one is an old one I plan to get rid of. Are you able to delete my account attempt so I can try again with mynew email?
Hi Sarah,
I have edited out the email address. That is not shown in your profile and so possibly you do not intend it to be displayed in a public and web searched forum.
* ''sarahtracey87 '' [/user/1030266]
You will be able to change your email address yourself in your profile settings use this link whilst you are logged in
*[/users/edit]
The settings include a tick box for
''Make my email public: [ ]''
Does that solve your problem ?
Personally I have not yet tried the new registration workflow but as it is now based on Persona it may not send you an email from support.mozilla.org -
Cannot download newest Itune version on Dell windows 7 computer; continue to get Runtime error!!!!!
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I would be content just to have the add-ons back, the one that allowed me to view ABC, NBC, CBS and a handful of other channels, and the one that connected me to the National Geographic channel and I believe some of the Discovery, etc channels . I can get to the Nat Geo if I go through my history but most of the other channels I can't. I've had MozFire on my computer for a while but mainly used Google Chrome until last week when I decided to check out MozFire. As has happened in the past I found myself really liking this program and wondering why I haven't been using it all along.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
I just noticed this morning that the lower tool bar, including weatherfox, Hebrew Calendar, and several other add-ons, has completely disappeared. Perhaps it's a matter of having inadvertently clicked on something one day when not paying attention. When I checked under Firefox preferences a little while ago, I went to <manage add-ons> and saw all installed add-ons were still installed. I cannot find a way to restore the lower tool bar displaying them.
After doing a back-up, I opened Time Machine to see whether an earlier Firefox homepage included the lower bar. I don't know whether I did not go back far enough or whether Firefox is somehow opening to a new, unintended default without that lower bar, no matter how far back I go.
Meanwhile, in the process of writing this, I returned to Firefox Preferences and now the general preferences dialogue box is completely screwed up, as though the size of the contents of that dialogue box had grown, in both dimensions, so it no longer fits within the box and parts of it cannot be accessed. It is truncated, in other words, both at the right side and along the bottom. I can no longer even access the add-ons section. The last thing visible at the bottom of that box is the very top part of the line of text that appears to read: "Choose preferences for your add-ons." It's as though someone had come along with an Exacto and sheared away the bottom part of that line of text. And then there's the <?> at the lower left corner. Along the right side of the box, under "Home Page," there are three buttons: <Use Current Pages>, <Use Bookmark>, and <Restore to Defau>, which is the point at which the text ends.
What the heck is going on? Now it's not only a matter of restoring the lower bar on my Firefox page, with add-ons displayed, but apparently I need to figure out how to resize the general preferences dialogue box, as well. I just checked: The other preferences dialogue boxes appear to fit correctly.
I use a Mac PowerBook G4 with Firefox version 3.6.13.See View > [X] Status Bar
-
Where can I find 3D materials add-ons for Photoshop CC 2014?
Where can I find 3D materials add-ons for Photoshop CC 2014? When I pull down the 3D menu to Get More Content, it takes me here: Downloadable 3D content | Photoshop.com. When I download and install the "Versatile materials", Adobe Extension Manger tells me I am installing "Material sets for Adobe Photoshop CS5 Extended", which turns out to be the same exact set that I originally had in PS CC 2014. I also search here: https://creative.adobe.com/addons to no avail.
Anybody know where I can find 3D materials that are more current, or at least different from what I have already?Where can I find 3D materials add-ons for Photoshop CC 2014? When I pull down the 3D menu to Get More Content, it takes me here: Downloadable 3D content | Photoshop.com. When I download and install the "Versatile materials", Adobe Extension Manger tells me I am installing "Material sets for Adobe Photoshop CS5 Extended", which turns out to be the same exact set that I originally had in PS CC 2014. I also search here: https://creative.adobe.com/addons to no avail.
Anybody know where I can find 3D materials that are more current, or at least different from what I have already? -
The update for 5.0 came so quickly, that a very large number of the add-ons and extensions I use to keep it safe and operate the way I am used to are not working, the MOST important of these being Google Toolbar and McAfee site advisor. I am already using Chrome for work due to the known issues FireFox has with the Google Toolbar in 4.0, and although I am a HUGE fan of Firefox, this latest update that seems rushed just to meet a deadline set may be the straw the broke the Firefox's back!! Let me know what I can expect going forward
'''The Google Toolbar is no longer supported by Google in Firefox 5 and up''', you may be able to get what you want from it for a limited time, the directions to install the Google Toolbar were posted before Google actually announced dropping support.
*Enable Google Toolbar in Firefox 5<br>http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
*the-edmeister posted a brief evaluation of the situation<br>https://support.mozilla.com/en-US/questions/841736
Since you are or were working on Google Chrome, you already have a good idea of how you can use your browser without the Google Toolbar.
In any case you can find several alternative solutions, and you can start working on them now, see
* "'''Using Google Toolbar features without toolbars'''" <br>http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars -
My add-ons still appear to be installed and working, but I can't install more, or uninstall, or configure them.
Try forcing Firefox to rebuild the list of installed add-ons.
# Open the profile folder, for details of how to access it see the [[profiles]] article.
# Close Firefox, then delete extensions.sqlite (you can also delete extensions.cache, extensions.ini, extensions.rdf if they exist)
When you restart Firefox the list of installed add-ons should be rebuilt.
If that did not work, you may have an add-on that is causing the problem, try the options in the [[troubleshooting extensions and themes]] article.
If you type '''about:addons''' into the location bar does that bring up the list of add-ons? I have seen a blank add-ons list if Mr Tech Toolkit add-on is installed, accessing the add-ons manager by typing about:addons in the location bar is a workaround with that add-on installed. The author of that add-on is working on an update.
Maybe you are looking for
-
Abap+java OR java only for EP6.0
abap+java OR java only for EP6.0
-
Technology Theme: The reference sample components will not work!
OK, maybe I am somewhere in left field on this one, but when I read "A pre-built Calendar component JavaServer Faces library. Import this file directly into Java Studio Creator", I take that to mean that I should be able to import it into JSC...WRONG
-
My first movie... all going smoothly... working the project library, clips, music, sound effects all working just fine. But just opened up imovie to find that the right hand side of the project library does not contain any pictures or audio. Instead
-
Hi all, Can MCAK handle multiple AWS connections in current version? If not, if there is a plan let me know. My customer would like to use multiple AWS regions (e.g. US-East and Tokyo) because of BCP/DR. thanks, Jun Kojima
-
CRMM_ACCOUNT - Standard vs Detail Display of Address
In the tab Addresses of application CRMM_ACCOUNT I can switch between Standard and Detail Display (after switching to Form View first). I need to make some fields that are currently only available on the Detail Display (e.g. Street 2 and Street 3) al