I can't register my PIN and IME (HELP PLEASE)

I really need your help guys, I bought a Blackberry 8520 from black market. It's brandnew because it sealed and complete with accesories. The seller told me that the unit was free from Sun Cellular and was sell to him buy the previous owner. The unit is already openline/unlocked already. I'm using a smart sim card but when I tried to register my unit to https://smart.blackberry.com I got an error that my unit is suspended or deactivated. I can use Wifi via hotspot browser but when I tried to use a facebook or twitter application I got an error "Your are currenty on the data plan service, contact your service provider to upgrade your data plan". I think the previous owner (which I don't know) is not paying his bill. Now I contact suncellular and as per them when the owner not paid their bills they only block the sim card and not the phone. As per them it might be the blackberry is blocking my connectivity. How can I register my PIN again? My phone is total useless.
Unit: 8520 Curve
Blackberry Tech and Admin I need your Help

csabillo18 wrote:
I want to subscribe to Smart BIS but during the registration of my pin and IMEI my phone is suspended or deactivated. Now how can I register my phone from other carrier if my phone pin is suspended or deactivated. SUN cannot help me about it.
You can't. Once the device PIN/IMEI has been suspended or deactivated, it can't be removed. You've probably purchased a stolen as lost BlackBerry, as stated above. Only the original carrier who suspended the PIN and can remove it, you would need to contact them.
You need to get your money back from the seller, obviously they lied to you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Apple ID is all of a sudden not an iCloud account. It used to work until a few days ago, but now iCloud can't register the ID and Outlook can't login to iCloud.

My Apple ID is all of a sudden not an iCloud account.
So it says any way. It used to work until a few days ago, but now iCloud can't register the ID and Outlook can't login to iCloud from my pc. Anyone else faced this problem or know how to deal with it?

Ditto here.
I tried setting up iClunk today.....
.....on my Windows 7 64bit computer.
I click on the iCloud icon in the Network & Internet section; the iCloud sign in window pops up and I type in my Apple user ID and password and it replies that I need to setup a separate iCloud account....even though it plainly states that for the user to "Sign in with your Apple ID".
Go figure.

Hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help

hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting to itunes my iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help

If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/

I updated to 7.0.2 and read to close an icon to double click home and then sweep up the icon to close it. I need to know how to sweep up the icon since I can't seem to do it. Help please???

I updated to 7.0.2 on my iphone and read to close an icon to double click home and then sweep up the icon to close it. I need to know how to sweep up the icon since I can't seem to do it. Help please???

Not the icon. Swipe up the preview card.

I cannot install the latest version of itunes as I have old versions of bonjour and quicktime. I can't remove these programs either. Help please as I have tried almost everything I have found so far on the the web.

I cannot install the latest version of itunes as I have old versions of bonjour and quicktime. I can't remove these programs either. Help please as I have tried almost everything I have found so far on the the web.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour and QuickTime entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

I have an IPOD touch 4g and upgraded to 6.1.3. I can not download the Podcast App. Help please.

I have an IPOD touch 4g and upgraded to 6.1.3. I can not download the Podcast App. Help please.

Listen to podcasts with Music app on iOS 6 - Mac OS X Hints
▶ How to Re-enable Podcasts in iOS 6 - YouTube

For some reason i can't sign into imessage and facetime. PLEASE HELP???

For some reason i can't sign into imessage and facetime. PLEASE HELP???

Hey tcap8687,
After reviewing your post, I have located an article that can help with iMessage and FaceTime. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If you have difficulty activating FaceTime or iMessage - Apple Support
If you see "Could not sign in, please check your network connection and try again" when signing in to your Apple ID
To resolve this issue, follow these steps.
Update to the latest version of iOS.
Verify that you have a data connection by going to www.apple.com in Safari. You can complete Apple ID activation using Wi-Fi or a cellular data connection. If you need help connecting to Wi-Fi, follow these steps.
If you're using Wi-Fi, make sure that your local Wi-Fi network is using the recommended Wi-Fi settings.
Sign in to your account and ensure that the primary email address and alternate e-mail addresses have been verified. If verification is pending, follow the instructions in the email Apple sent to that email address to complete verification. Or remove the e-mail addresses from the account.
If your Apple ID isn't an email address, you can change it. The Apple ID that you're using to activate FaceTime or iMessage must be an email address. Find more information on how to change your Apple ID.
Tap Settings > General > Date & Time. Make sure that your iPhone is set to the correct time zone. If Set Automatically is on but the wrong time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
Enable iMessage and FaceTime while connected to a different Wi-Fi network (in a different location) if a cellular data connection is not available.
You can see that you've activated FaceTime and iMessage with your Apple ID by following these steps.
Tap Settings > FaceTime > You can be reached by FaceTime at:
Tap Settings > Messages > Send & Receive > You can be reached by iMessage at:
Thank you for contributing to Apple Support Communities.
Take care,
BobbyD

TS2771 my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

- Try inserting/removing a earphone plug a dozen or more times.
- Reset the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be a bad headphone jack.

Time Capsule has green light, but I can not connect to the internet. Help please

Just got a new Time Capsule. After a few tries, I finally got the green light. But I now can not conect to the internet. Help please.

Problem Solved.....call ATT and they gave me the information I needed....account is a PPPoE. Use your ATT email address as the username, and then ATT provided the network password. Enter the information, update, restart. Now, internet access is achieved.

What are Device PIN and Device IMEI please?

Dear World...
I live in Germany and O2 is my network. I've set up my email and bbmessanger accounts and everything worked great until a few days ago. An icon 'email setup' has appeared again but my email works fine. I can't get online now though it is asking me for a Device PIN (the one I got with the phone isn't working) and a Device IMEI and I have no clue what that means or where to find that.
Also now my bbmessanger receives messages but I can't send any now (like the dude from the UK with the vodafone problem) but I can't get online with my blackberry because of this STUPID email setup thing. Please help I'm nice
One last thing: why does my service keep chageing from 'Edge' (data) to GPRS? I can call other countries but they can't call me apparently because these signals which keep changeing are too weak. Is there a way to choose one? Thanks guys

Your PIN and IMEI are listed at Options > Status on your BB.
OR, remove your battery and both are listed on the white stick underneath the battery.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I get no answers and no help!

Hi All,
I am so angry frustrated and fed up with BT its not real and after a month of useless customer service people in every country in the world I have decided to get ofcom involved as BT just dont care at all.
I have been a customer for BT for about 7 years and always paid my bills ontime and have many time in the past recommended BT (Not anymore) alot not only to friend but also to businesses.
After a messy split with my partner i had to move from my property so on the 6th of January i called BT's moving team and got the process moving to move all my services (phone, broadband & bt vision) the guy was really helpful and said that the old phone and services would be disconnected on the 17th Jan and broadband the same day, he then went on to say that an engineer would have to come to my property on the 21st to check that the bt vision would work correctly as there was low bandwith where i lived but thought it would be ok.
So i thought great all done but on the 17th nothing happened at the new property i call CS and the lady did try to help and after talking to the old line user said a mistake had happed with a cancellation and they would sort it all out by the 19th so dont worry. 19th comes nothing so another call to CS they could not work it out so put me through to a guy in the UK who could not have been more unhelpful if he tried. He said that the engineer had reported a problem but i would have to wait. At this point i thought i would complain as i had not had any comms from BT at all i had to do all the calling even though they say on the website if the date are moved they will contact you.
i tried the only complaint messaging service this time. The guy tried to be helpful but then informed me that my order was cancelled? Why i asked he said he did not know but would have to call me back. Well he did call back the next day and still had no idea what had happened and i have now not heard a thing from him since last thursday.
On Monday i logged into my account and now it shows i wont get any connections until the 7th of feb so i called and said its a joke and whats going on. The guy said what do you expect you only placed the order yesterday? I asked what? and then looked at the only account and true enough the order date had changed to the 23rd and they could not see the previous order even though the order number had not changed. Its a disgrace as i think you will find the moving team dont work sundays so i know someone has changed that so it did not look so bad. The person said he would escalate the connection (I bet he did not as naff all has happened). He said he would get his manager who i have to say i dont think was i just think he passed me to his mate to try and get me off the line. He said they would get it sorted and come back to me with 24hrs and guess what Nothing.
So if you are a good customer and pay ontime this is what BT really thinks of you and will help you if things go wrong. I have got a complaint reference now and will be keeping a diary of events in order to contact Ofcom when it is all sorted and to post on onther forum the outcome and how i was dealt with.
Kinga

Well the useless system has done yet another update and useful as usual it now says my connection date for BT Vision is 26th Jan (2 days ago) but the phone and broadband will be 7th of Feb so that will be a full month since i placed the order and still nothing from anyone at BT.
Nothing about the original engineer visit or anything so this is going to roll on and on and the so called escalation, well they may as well said what can we say to you to get you off the line as i bet there is no such thing as escalition at all as so far all its done is push these so called dates further and further away.
Oh and here is a another nugget of so called customer service for you is you ask about compensation for all the calls, hassle and stress they say you cant have a thing as it says it in the terms & conditions. Oh well in that case why call you team customer services if you cant really stand the customers and cant admit when you make a massive mistake causing untold hardship to the customer that you would like to make up for it in someway.
Kinga

Itunes 10.4.1 64bit for Win 7 can't find quicktime, QTCF.dll error -- HELP PLEASE!

Every time I install itunes 10.4.1 64bit for Win 7, it says it is unable to find quicktime, then instructs me to uninstall itunes then install it again. I've done this several times but still have the same problem. There is also another promt that says quicktime can't find the entry point and there's an error having to do with QTCF.dll ... what is this and how can I get my iTunes to work? Help please!

hi guys i found the solution from a wizard of the community and it works, so u may try as follows:-
Correct Answer by b noir on Aug 24, 2011 8:13 PM
Let's try a standalone QuickTime.msi update. It may not install correctly either, but fingers crossed at least the error messages we get from that install may better indicate the nature of the trouble with the QuickTime install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the QuickTime.msi to do a standalone QuickTime.msi install.
Does it install properly for you? If so, does iTunes install properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Portlets can not be seen by Public Users: Help Please!

Hi,
I have seen another message that might be the same that is happening to me. I have created a content area, with folders and items. I have selected all available options to make them public , appart from publish them as portlets. I have added them to a page but when I enter the page as a Public User (without logging into Portal) the portlets can not be seen...There are others that can be seen ...Could you help me with this?
Many thanks
Mariela

I assume you're using the generic folder portlet to view the folders.
If you publish a folder as a portlet, are you able to see it?

Illustrator Data Sets and Variables Help Please

Hi, how's everyone doing? I need a little help with Data Sets and Variables, or at least i believe that's what i need help with. Ultimately i am trying to run an action on a batch of files.
I have an eps file with two images placed side by side. They are the same image. I am trying to replace both images and save the file accordingly. Trying to make this happen using a bunch of files. All the files can be in one folder and will be the same size.
I hope this make sense and what i need done is doable.
Any help or advise would be greatly appreciated.
Thanks in advance.

Not sure a I read you correctly but if I understand you
what you have to do is make the first two images as dynamic variables using the variable panel and save it as a data set
then replace those two images and save those as a data set
So now you have data set one and two.
You can save that as an variable library (xml)and that can be loaded into other documents.
The question is can it be actioned?
It can be scripted and do you want the same two images to replace the same two image in each document.
I think you really have to tell us more.

JSP and Servlet - help please

Hello,
I am making this feedback for fun and a bit of learning too. I have an INDEX.JSP page, where the user selects the very first option. Depending upon the selected option he is moved another page PRODUCTFEEDBACK.JSP (so far I have completed this). Here as usual there are many fields to be filled in. As a spams protection i have done this;
I have a AdditionClass, which is a seperate class where two number are generated at random. This numbers are called by PRODUCTFEEDBACK.JSP. The user is then asked to perform the addition. The completed form is then sent to ProductFeedback servlet.
When I compile my PRODUCTFEEDBACK.JSP I get this error. Can you please tell whats wrong?
PRODUCTFEEDBACK.JSP
      *<td>Please help us to prevent Spams by performing this simple mathematical Calculation. We appreciate your effort </td>*
    *</tr>*
*</table>*
*<jsp:useBean id = "AddTest" class = "go.AdditionClass" />*
*<table width="53%" border="0" align="center">*
    *<tr>*
      *<td><div align="center">*
*<input name="textfield8" type="text" size="3" value ="<jsp:getProperty name="AddTest" property = "randNum1" />">*
* + *
*<input name="textfield9" type="text" size="3" value="<jsp:getProperty name="AddTest" property = "randNum2" />">*
* = *
*<input name="_total" type="text" size="5">*
      </div></td>
    </tr>
    <tr>
      <td> </td>
    </tr>
</table>
<br>
<table width="37%" height="23" border="0" align="center">
    <tr>
      <td width="33%"> </td>
      <td width="67%"><input type="submit" name="Submit" value="Click here to send us this form"></td>
AdditionalClass.java
* To change this template, choose Tools | Templates
* and open the template in the editor.
package go;
import java.util.Random;
* @author MAC
public class AdditionClass {
    Random generator = new Random();
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void SetNum1(){
        randNum1 = generator.nextInt(10); // Generate First Random Number
    public int getNum1(){
        return randNum1; //Return First Random Number
    public void SetNum2(){
        randNum2 = generator.nextInt(10); // Generate Second Random Number
    public int getNum2(){
        return randNum2; // Return Second Random Number
    // send the Random Numbers to ProductFeedback class
    public void productFeedbackRandNum1(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(randNum1);
    public void productFeedbackRandomNum2(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(randNum1);
}Erros that I am getting:
org.apache.jasper.JasperException: Cannot find any information on property 'randNum1' in a bean of type 'go.AdditionClass'
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:462: The following error occurred while executing this line:
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:440: Java returned: 1
BUILD FAILED (total time: 1 second)

Thank you for replying. I modified my Bean class then what is posted above, so thought to repost the code again and seek help. There seems to be no error now but it just dont generate any random numbers, All i get very time is 0. I am wondering, is my code generating 0 as random number, every time :-)
package go;
import java.util.Random;
public class AdditionBean {
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void generateRandomNum1(){
        Random generator = new Random();
        int num1 = generator.nextInt(10);
        SetRandNum1(num1);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(num1);
    } // End of generaeRandomNum1
    public void generateRandomNum2(){
        Random generator = new Random();
        generator = new Random();
        int num2 = generator.nextInt(10);
        SetRandNum2(num2);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(num2);
    } // End of generateRandomNum2
    public void SetRandNum1(int num1){
        randNum1 = num1;
    public int getRandNum1(){
        return randNum1; //Return First Random Number
    public void SetRandNum2(int num2){
        randNum2 = num2;
    public int getRandNum2(){
        return randNum2; // Return Second Random Number
}// End of classThank you,

I can't register my PIN and IME (HELP PLEASE)

Similar Messages

Maybe you are looking for