I can't reinstall Windows 7/8 via Boot Camp

Hi all,
So, I've got an SSD + HD (in optical bay) drive combination in my Mid-2012 MBP. Originally, I had successfully installed Boot Camp onto my HD using Windows 8. Ran without problems. Then, I decided to remap the partitions on it, which messed up the boot record. So, since I didn't do any research, I decided it would be fine to just delete the Windows partition and try to start over.
I've reformatted my HD to a single partition, setup my flash drive via Boot Camp Assistant, and allowed Boot Camp Assistant to repartition my HD for Windows. However, now every time it boots into the Windows Installer, I get the following error.
'Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu.'
This threw me completely off. How can I resolve this issue?
I've even tried to install Windows without the SSD plugged in. It won't give me the error then, but when the installer starts, it'll fail saying the installer is missing files or has corrupt files. This happens with both the flash drive and the DVD.
Any ideas?
Thanks,
wtcnbrwndo4u

After a bit of searching, it appears that Boot Camp can only be installed properly with a single drive in the system. When I think about it, I'm pretty sure I installed Boot Camp before I got my SSD, which makes sense.
So, I think I figured it out. If anyone can confirm, let me know.
Thanks.

Similar Messages

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

Can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work

I can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work (backup, reinstall os, erase space, etc.)
Macbook pro retina
os x yosemite 10.10.2
Thanks

There are several possibilities.
1. You do not have contiguous free disk space.
2. BCA has failed, or you may have a Fusion drive which is causing problems.
3. You have incorrect permissions on the disk.
4. Can you boot in OS X Safe Mode - OS X: What is Safe Boot, Safe Mode? - Apple Support?

I can't start windows 7 normally from Boot Camp

I can't start windows 7 normally from Boot Camp.
It was running fine since I have installed it 7 months ago, but now it can't start or (restart) normally (safe mode is ok). It displays a black screen after showing the logo, and I have to shut down the machine. My Mac system is working fine. Mac technician (Genius Bar) has run a surface scan to verify hd integrity and proofed ok, but could not give any advice on Windows issues.
Please advice if anything I should do before cleaning up my partition and reinstall Windows.

I would guess and sorry for asking but you already tried booting from Windows 7 DVD and doing auto repair?
There are dozens of things to look at and do, and begin with chkdsk in Windows, yes but that only looks at one aspect. You can't really check for bad sectors on a drive's sectors. The best? to use the drive vendor's own utility actually, often with a linux boot CD or Windows program (they don't make Mac OS versions, one reason I first installed Vista over 5 yrs ago)
Restore check points
Uninstall last update or driver
Clean the system of debris temp files, caches, registry errors, fonts and left overs
make sure you have 20% and 12GB free space or more
A hard shutdown can create more problems.

I can not install Windows 7 By applying Boot Camp

Hi
I have a problem
I can not install Windows 7
By applying Boot Camp
I have a message appear
Boot Camp does not support installing Windows on this Mac.
Boot Camp does not currently support installing Windows on a Mac with a 3 TB hard drive.
Hardware
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
32GB 1600MHz DDR3 SDRAM - 4x8GB
3TB Fusion Drive
NVIDIA GeForce GTX 675MX 1GB GDDR5
Apple Magic Mouse + Magic Trackpad
Apple Wireless Keyboard (English) & User's Guide
Accessory Kit
Software
iLife '11
OS X Mountain Lion
Apple did not you tell me about this problem at the time of purchase
Is there a solution to the problem ?

Unfortunately, I can not partitioning Alhardsk such manner described Palmqal
http://im32.gulfup.com/mGuB1.jpg
http://im36.gulfup.com/hLrW1.png
http://f.cl.ly/items/04323L1k173F1r2h0v3b/Screen%20Shot%202013-01-30%20at%203.56 .21%20PM.png
Is there another application that divide Alhardsk ?

Installing Windows 7 Professional via Boot Camp Assistant on late 2013 iMac 27"

So here I am with a brand new 27" iMac bought on Nov 3. Machine is top of the line w/ 3.5GHz quad-core intel i7Core, 4GB Video Card, 3TB Fusion Drive and right out the box on first start up and first update, I install Windows 7 via Boot Camp. Best install of all time, right on through no problems whatsoever and I'm thinking - Problems? what problems! HA! ... well a week later Windows 7 crashes from my own bone-headed mistakes and i go to reinstall windows thinking oh i'll be down for maybe 2 hrs? but it'll fix my problem. No way.. 1 week and an exchange-for-another-identical-imac-from-store later plus $300+ dollars in tech services Here I am with no resolution to this problem of installing Windows 7 via boot camp. I just absoultely couldn't get past the stinkin' step of "Setup was unable to create a new system partition or locate an existing partition... yadda yadda yadda"
UNTIL NOW - 9:07AM on 11/19/13 I have SOLVED the problem. Read from here down to get my instructions (with Pictures of course!!)
Before you even start this is VERY IMPORTANT. Things will go to all **** if you don't.
USB ports. On the back of my iMac, there are 4 of them. From Left to Right (you have to acknowledge this or things will never work), place your Super Drive (CD/DVD Drive) in the Left slot. Next, place your USB Mouse in the 2nd from Left slot. Finally, place your USB/Flash Drive in the 3rd Slot (it will be 2nd from the Right). See Fig1.
FIG.1
Now you go to Boot Camp Assistant, start it up, and check off the SECOND option:
"Download the latest Windows software from Apple". See Fig2.
FIG 2
Let the download do its thing and when its done, Boot Camp will advance to the partitioning screen. Allocate the space you want for the Windows 7 Partition and hit "Install".
CRUCIAL: Immediately after hitting "Install", Boot Camp will pop up a message stating that the USB/Flash drive currently inserted providing Windows Software drivers brings a functionality issue and Boot Camp will disable the drive to continue. This has to happen in order to avoid the dreaded "A new setup partition or existing partition cannot be located" message that comes during the Windows 7 Install when picking your partition. I am convinced that this pop up only occurs when you have your DVD drive, Mouse, and USB/Flash drives inserted into their appropriate slots.
After you accept Boot Camp's disabling of the USB drive, install is pretty standard there on out. Boot Camp will create the partition, the computer will reboot and begin its Windows 7 install via your CD/DVD drive. Also want to note that I used a wireless keyboard during the entrie intallation process. I had a wired keyboard installed in my numerous attempt this past week b/c I had read in so many forums a wired keyboard was better for this install - well NOT IN THIS CASE. In fact the added USB ports that come with the wired keyboard only confused things for me even further.
I am happy to say that Windows 7 has installed successfully on my iMac, and I've reached its appropriate updates as well. Now onto 3DS Max 2014 install.

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

Using one copy of Windows to install via boot camp and on a virtual machine?

I have a copy on windows 7 coming in the post and I was wondering if it is possible to install windows 7 via boot camp when I want to do something more memory intensive such as gaming and also install it on a virtual machine such as virtual box just for other regular stuff. Also would this be possible using one copy of windows and one licence key?

Then you need Parallels or Fusion to link to a native Windows partition.
Comparison of VMware Fusion Parallels VirtualBox

Can't install windows 8.1 with boot camp

I'm trying to install windows 8.1 with boot camp and this is the message I keep getting. I've tried several times and every time I get this. I have a 2015 MacBook Pro. I've tried installing from a usb with ISO and also from a oem windows dvd. Any help would be appreciated.

Excellent.
Windows installation has four or five reboots, and the Apple BootManager tracks such reboots via the Mac NVRAM, otherwise the next reboot will cause OS X to boot rather than Windows. It is also used to set up some variables used to pass information to the CSM-BIOS layer. If an installation has failed, the variables do not reflect the current and clean state of the machine. A NVRAM reset will re-initialize these variables for the next attempt.

I can´t find windows support files for boot camp

I can´t find windows support files for boot camp

Boot Camp Assistant
If you can't download, go to Network control panel and check your settings there, look to see if there is more than one interface listed. And turn off "Auto-proxy setting" and see if that helps, it does in half the cases.
The only thing really needed would be a small Apple Software Update for Windows program to pull the drivers down while running Windows. Just that one program, which could update itself as happen with 2.0 and 2.1 version.
As it is, downloads can take 8 hrs for a tiny 620MB package. Strange. True. Been like this.

Installing Windows XP Pro via Boot Camp

Does anyone have any do's and dont's about installing Windows XP Pro on a 20" IMAC (OS X 10.5.7) via Boot Camp. All I want to have on the partition is Quickbooks Pro 2009, Anti Virus Program and possibly PC version of Office,

Have you tried emulation software, such as Parallels or VMFusion? None of the programs you list are overly intensive, so you may be able to get them working fine in an emulator--which means you wouldn't have to restart the machine to use those programs. Both of the programs I listed offer free trials.
Additionally, there's a few free options that are similar to MS Office that work on the Mac. NeoOffice & OpenOffice are the first that come to mind.
If you do choose to go with BootCamp, here's some pointers:
1) Get your data backed up at least once before you do anything
2) Only use the BootCamp Assistant to partition the drive and/or delete the partition
3) Go for free anti-virus, such as AVG Free. It does the job just fine.
4) Make sure you follow the BootCamp instructions carefully--if you don't, you'll find that your OS X partition mysteriously vanishes.
Good luck!
~Lyssa

Windows Support Software via Boot Camp: "keyagent failed to start"

I am installing Windows 64-bit on a Macbook Pro 13" via Boot Camp. In the Windows support software stage, I get a pop-up msg "Service 'KeyAgent' (KeyAgent) failed to start. Verify that you hae sufficient privileges to start system services. I do have sufficient privileges as I'm logged in as the admin. Does anyone know what this message means and what actions I should take next?

File a bug report with Apple.

Can i load windows vista even if boot camp only supports windows 7?

Can i still load windows vista, even if boot camp now only seems now to support windows 7? I had loaded it previously same mac same windows vista but took it off becuase of a hardware issue. now when i want to use it again (playing games mostly) i can load vista but all sotes of things are not working internet connection and graphics and the driver disk that is made through bootcamp says noy that in order to use it i need to be running windows 7 .
Can anyone help
Cheers
Rob

Welcome to the Apple Support Communities
On OS X Mountain Lion, Boot Camp only supports Windows 7, so you can't install Windows Vista or XP, and if you install Windows Vista or XP, you won't be able to install Boot Camp drivers because they aren't supported under XP and Vista.
If your Mac came with DVDs, insert the Mac OS X DVD (or the Snow Leopard DVD) that came with the computer and install Boot Camp drivers. If your Mac didn't come with DVDs, you can't get Boot Camp drivers for Vista

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

I am using windows Macbook pro 15 retina display model with latest mountain lion 10.8.3 software Have installed windows 8 perfectly via boot camp. However many a time the machine is not able to boot windows 8 and aborts. just shows the green screen for a

I have installed Windows 8 perfectly ia boot camp but on booting the windows 8 does not load up fully. It comes upto the windows green screen for a moment and then goes blanlk. It is very frustrating.

no one has replied me too got this issue ,

I can't reinstall Windows 7/8 via Boot Camp

Similar Messages

Maybe you are looking for