I can't restore my ipad 2 i keep getting error 1. Can anyone help me?

I just updated my ipad 2 and it told me to connect with itunes. I tried to restore it with itunes 10.6 and I keep getting a error message 1. Can anyone help me?

http://support.apple.com/kb/TS3694#error2001

Similar Messages

  • I can't restore my Ipad and keep getting NAND messages running along the type left of the screen

    I can't restore my Ipad mini.....it begins the process and then stops midway through and shows NAND messages along the top left of the screen. Then all I get is either a blank screen or Apple logo......unable to turn it on or off.

    Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions

    i have tried to restore my iphone but keep getting error 1015 any suggestion

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • HT201210 I have an old i phone 3G and do not know the password for it. trying to restore it from itunes but keep getting error code 1015, any help on how to get passed this please?

    I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

    I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

    Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
    Look in the Application Support folder for PACE items and delete them.

  • I downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

    i downloaded songs to my phone at xmas and when i plugged in to my laptop it wiped the phone of new purchases when i try and download them to my computer in itunes via previous purchesses it wont load the list and i keep getting error 10053 can any1 help

    Syncing shouldn't trouch you photos unless you have photos in a Photo Library album.  These would be photos that were synced to your phone from your computer.  If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
    If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically".  Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
    Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141.  To follow the steps, first open iTunes and go to View>Show Sidebar.  Also, Transfer Purchases is now located in File>Devices.

  • TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen?  Error code 1416, any help?

    I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen?  Error code 1416, any help?

    When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives.  If that info is true, the question is, do you have a compatible combination of logic board and hard drive?

  • HT1338 My kid down loaded mackeeper and now I can not get rid of it.  I have tried all techniques suggesting on several sites and still can not empty the trash can.  keep getting error code -8003.  Help.

    My kid down loaded mackeeper and now I can not get rid of it.  I have tried all techniques suggesting on several sites and still can not empty the trash can.  keep getting error code -8003.  Help.

    http://reviews.cnet.com/8301-13727_7-20020873-263.html
    This should help you empty what's currently in the trash, but is no guarantee you got everything related to MacKiller off the drive. See Ogelthorpe's link.

  • When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem

    When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
    this problem?

    This thread from the Premiere Elements forum may help:
    http://forums.adobe.com/thread/1286807?tstart=0

  • TS3694 keep getting Error 9 can you help as cant use my phone

    help keep getting error 9 when trying to restore phone

    Hi there Holly N,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    -Griff W. 

  • TS3694 trying to restore to factory default by keep gett error:code 3194 please help

    need to know hoe to restore to factory default ....keep getting error 3194

    Hi ratcat14!
    I have an article that can help you troubleshoot this issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • HT201210 I can't submit the new itunes software to update my computer and iphone. I keep getting error 1667. Please help

    I can't submit the new itunes software to update my computer and iphone. I keep getting error 1667. Please help

    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • I can't watch mccartney live! keep getting error messages?

    i can't watch mcccartney live on my apple tv.. keep getting error message. anyone else??

    Had to reboot my Apple TV 2 and then it worked fine.  Very nice b&w streaming and the sound is good on our Samsung TV that is 10 years old, via HDMI cable.  Do more Apple.

  • Keep getting error 6, can someone help

    My computer crashed and I just redownloaded everything. Now whenever I try to open Illustrator, I get "Error 6" popping up. Can anyone help?

    skmundhra wrote:
    ...I want to go back to IOS 6.01 or IOS 6.0. ...
    Downgrading is not supported by Apple.
    skmundhra wrote:
    ...1 but keep getting error 3194 . ...
    this is indicative of the Device being Jailbroken... If this is the case you will need to look elsewhere...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • Can't download Acrobat Professional. Keep getting error message.

    I can't seem to download the Acrobat Professional pro. I keep getting error message:
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s)
    ----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
    ERROR: Error 1935.An error occurred during the installation of assembly component {76C3F0F6-9B9D-35DA-81C6-CA8A88CC93CA}. HRESULT: 0x80071A91.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1935.An error occurred during the installation of assembly component {76C3F0F6-9B9D-35DA-81C6-CA8A88CC93CA}. HRESULT: 0x80071A91.
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    See the following help document:
    Exit Code: 6, Exit Code: 7 Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • HT201210 restoring iphone 4, but keep getting error 2001 message

    i am trying to restore iphone 4, but it wont let me, it keeps giving error message 2001, please help me anyone

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Maybe you are looking for

  • Unable to view the image in Oracle Mapbuilder

    Hi, I am unable to view the image using oracle mapviewer. It stated that: No spatial data to render... INFO [oracle.sdovis.CacheMgr2] Spatial Data Cache opened. Region=SDOVIS_DATA. INFO [oracle.sdovis.CacheMgr2]      max_cache_size=32 MB. INFO [oracl

  • Add marker to Google Map

    Hi there.  I am creating an iPad app with In Design CS5.5. I want to add a link from an image with a button to a Google map showing where the image was taken. I can successfully add the map and load it but I cannot find out how to add the marker show

  • Just bought a Sony A7.  .ARW files not being accepted in LR 5.2.

    I just bought a Sony A7, but when I tried to import the files into LR (v. 5.2) it says that the preview is not available on import.  I was under the impression that with LR version 5.2 I would not need a .DNG converter, but now I'm not sure what I ne

  • How to I open photos in the new cc?

    I have been a long time user of CS6, but today I signed up for the new Photoshop CC.  The problem is that I have absoluetly no idea how to open a photo in the new CC.  I don't even see the new CC as something I can download, only a lot of icons that

  • Importing image from scanner

    How can I import an image from my scanner (Epson Artisan 837) directly into Photoshop 5?  When I go to import, there is ONLY the message: "Video Frames to Layers"...whatever that means.  I don't know how I can now use Photoshop to open my scanner and