I can't restore my system to its factory condition.

hello all
i have Pavilion DV6 laptop, my HardDisk is dmaged and i can't boot anymore (because of the physical BadSectors) , so ibought a new HardDisk ( 1TB )
when i plug my old hard disk into another PC , i can see the 3 partion's
1 : C:\[system]
2 : D:\ [Recovery]
3 : E:\ [HP TOOLS]
i can fully browse them , so i just copied all the files in the partion D:\ ( which contains the Recovery Files) to my new Hard Disk
( i made a new partion with enough free space for the recovery files )
i done that by showing the hidden files and the system hidden files and then copy , the original size of the Recovery files are the same with the new one (near 19 GB) so i just installed a new Windows 7 (32bit) in my New HardDisk (the old system was windows 7 64bit but i have windows 7 32bit CD Available so thats why)
and i also downloaded and installed HP Recovery manager to restore my laptop to its factory condition,but when i run the recovery manager,i got an error message(HardDisk.dll is missing) i downloaded that .dll file , next time i got another error (PRRC.dll is missing) i downloaded that file too , finally when i ran the Recovery manager from my Desktop i got a Turkish message ! , while my system language is arabic
see here : http://imgur.com/WzrMDD2
and when i reboot and Press F11 To start the Recovery manager, it starts normally but i can't click on the system restore ! , i also can't reset my laptop to its factory condition, the buttons are disabled see here : http://imgur.com/7JYwO8B i can only click on Run Computer checkup and Show Contact info
should i install a 64 bit system and try the Previous step ? , or is there any missing files that i should copy into the D or C ?
please guys help me to restore my system , the old HardDisk is Dmaged and not bootable anymore so i don't want it

Hello MohammedFawzi. I understand you're trying to recover your notebook to factory conditions.
If you're unable to perform the recovery the normal way I suggest ordering a set of Recovery Discs directly from HP. This will not only reinstall the operating system but will also recreate the partitions (including Recovery), install drivers, and most of the software.
To order the discs you'll need to contact HP Support in your region. You can visit HP Support Worldwide to locate your region's contact information.
I hope this is helpful. Have an amazing week!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Similar Messages

HT1414 can I restore my iphone4 to its factory iOS version?

can I restore my iphone4 to its factory iOS version?

If you are having a specific problem with iOS 7?
We may be able to help.
If you simply dislike the look then no one here can help but you can leave Apple your feedback here.

How can i restore macbook pro to its' factory settings?

i wanna restore my mac to its' factory settings. how can i do this??
thanks for help

Use its original disks to erase the drive and install a new OS.
(60804)

Is there a way to restore an iPod to its factory condition?

Since the last updater, I havnt been able to connect my iPod to any computer.
Im sure the updater corrupted the iPod, so what I would like to do is wipe the iPod clean and start fresh with the factory settings.
I know you can restore it using the updater, but because my computer freezes everytime its plugged in, I cannot restore it using the computer.
Is there a way to restore the iPod without using a computer?

Tyler:
First, start Task Manager. Kill iTunes.exe, iPodService.exe, and iTunesHelper.exe. Just select them and End Process on each one.
Next, use these instructions to put the iPod into forced disk mode: http://docs.info.apple.com/article.html?artnum=93651
Now, connect it to the computer. You should be able to recognize the iPod in this way.
If these instructions do not work, then something else is wrong, and whatever device locks up is where the problem is. Meaning that
-if the iPod won't go into Forced Disk Mode or comes out of Forced Disk mode, then the iPod has the problem and needs to be replaced (it's not fixable by you)
-if the computer locks up, then the computer probably needs to be formatted and have Windows reinstalled, since no Apple software is now running on the thing (you killed the only three pieces of Apple software that matter)
This is one of those things that is simply always true. There's no trickery involved, no way you can make it behave other than the way I've laid it out above. It's a simple matter of knowing how the stuff works.
So, I hope that helps you find the problem at least, if not to fix it. In forced disk mode, with no Apple software running, the iPod is just like any other external hard drive. Nothing special to it.

I cannot open Adobe photoshop CS2 which I was using 10 days ago. Can I restore the system to before 10 days, so it will work again?

I cannot open Adobe photoshop CS2 which I was using 10 days ago. Can I restore the system to before 10 days, so it will work again?

The hatter wrote:
Rosetta can have a 2GB RAM "tax" to manage PowerPC code as well as how that affects performance.
I think real world performance shows both statements to be wrong; consider this:
If that were the case, how come Apple does not include that information in its Snow Leopard installation requirements, since Rosetta is an optional install?
Also, running a PowerPC app on an 2011 i7 Mac with Snow Leopard will run faster than running that PowerPC app on a PowerPC Mac.

Can I restore my system from install discs when DVD drive is not working?

Can I restore my system from install discs when the DVD drive in my iMac G5 is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
Thanks

You need to set up the FireWire Target Disk mode installation with the iMac as host, so that it runs its own install disk. The G5 tower should be the target, so that you are "borrowing" only its DVD drive.
Shut down the iMac. Put the iMac install disk into the G5 tower, and reboot the G5 tower into TDM by holding down the T key. Connect the FireWire cable and then restart the iMac while holding down the option key. Hopefully the iMac startup manager will see the install disk that is in the tower; if so then select it and boot from there.

I have a I MAC i bought in 2004 and I am having all sorts of problems. How can I restore my computer to its original form?

How can I restore my computer to its original form or update my operating system?

vincenzofromhenderson wrote:
How can I restore my computer to its original form?
See Erasing disks securely
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
Restoring your computer’s software

Hello, I have an iPod touch 4 generation. I have a problem that my PC is broken and I later forgot my password. How can I restore the system without a PC. Because I have receipts from the rest because I POD and

Hello,
I have an iPod touch 4 generation. I have a problem that my PC is broken and I later forgot my password. How can I restore the system without a PC. Because I have receipts from the rest because I POD and

You need a computer with iTunes installed to regain use of your iPod. Unless you have the iPod backup file from the syncing computer all you can do is to restore the iPod to factoery defaults/new iPod. You will also need to place the iPod in recovery mode is you restore the iPod on other than on its syncing computer. For reoverymode see:
iPhone and iPod touch: Unable to update or restore
Remember the passcode is a security feature.

Can I restore my system from install discs when DVD is not working?

Can I restore my system from install discs when DVD is not working?
There is a disc jammed in the drive and when I try to do an install in Target Firewire mode using a G5 Tower I get an error saying the software cannot be installed on this machine, before I can even select the iMac's drive. I'm using the grey software install discs that came with the iMac.
Is my only option to open up the iMac and get the jammed disc out?
Thanks

Problem solved - I posted on the general Tiger Discussions as well.
I had the wrong machine started in Target Firewire mode.
http://discussions.apple.com/thread.jspa?threadID=2180754&tstart=0

Can I restore the software to its original version?

Can I restore the software to its original version? My iPhone 4S is only 8gb and i think d new version is eating up the memory size.

Afraid not. Downgrading the iOS is not an option. Neither should it be eating memory - you might like to look elsewhere for the cause of a memory problem.

I no longer have sound for either my audio books or my music on itunes. I've tried everything--restarting, updating, re-installing audible app, and restoring the iphone to its factory settings--nothing helps. How do I get the sound back?

How do I get the sound back on my iPhone 4? I've tried all the fixes such as restarting iPhone, reinstalling the audible app, and finally yesterday, I restored the phone to its factory settings. I still get no sound from music on iTunes or from my audible books. The phone still rings (I have sound for that) and the voice control speaks to me, and when I'm typing, the automatic text voice speaks so I can hear it but nothing else works.

Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best.

Can't restore my Toshiba nb255 to factory settings

I don't know much about computers and don't know how ti restore this thing. I tried holding the 0 key but nothing happened after like 3 minutes. I tried holding the f11 key and it just beeped. Any help would be appreciated!

Make sure your system is completely powered off. Press and hold down the '0' (zero) key, power on the system while continuing to hold down the '0' key, follow the directions on screen to recover your system to its 'Factory Default' state.
If the above will not work, try this:
1. Power on the computer while pressing the F8 key to enter Advanced Boot Options.
2. Under Advanced Boot Options, press the Enter key to select Repair Your Computer.
3. System Recovery Options will appear, click Next.
3. Log On as a local user to access the System Recovery Options.
4. Under Chose a Recovery Tool, select Toshiba Recovery Wizard
Still no joy? You will need to order a set of Toshiba recovery media:
Order Recovery Media
Good luck.
Mike

I'm wanting to restore Safari to its factory settings but my Safari doesn't show the "Restore Safari" button for me to do that. How do I restore Safari back to its factory settings?

I'm wanting to restore Safari on my computer back to its factory condition but, for some odd reason, Safari is not showing me the "Restore Safari" button on my computer. Can anyone help me in this dilemma?

Safar 8
Apple removed "Reset Safari" menu option in Safar 8.
In it's place there is "Clear History and Website Data".
You can use that option.
Best.

I am selling my iMac but would like to restore it back to its factory settings! How do i do this?

I am selling my iMac but would like to restore it back to its factory settings! How do i do this?

If you use iTunes to buy music or Apps for an iOS device run iTunes and Deauthorize your computer. Do the same with the Mac App Store program.
If your computer shipped with Lion you'll first want to need to restart the computer with the Recovery Partition (hold command R while you restart the computer) Once you've booted select the option to format the hard drive and then select the option to install the OS.
If your computer shipped with an earlier version of the OS, restart your computer with the system disk. Select Disk Utilities from the menubar options and format the hard drive. Then select the OS install option and install the OS.

I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up pictures

I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up all of my pictures from my phone.

If you backed up the device, all the data is in the backup. Restore the backup.
A better question is why would an intelligent person not copy the pictures from the device to the computer regularly, especially before attempting an update, as the device is designed to be used?

I can't restore my system to its factory condition.

Similar Messages

Maybe you are looking for