I can't retrieve email, server not connected, at work, on my ipad mini
I can't retrieve email, server not connected, at work, on my ipad mini
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom
Similar Messages
-
I can't seem to get my headphones to work on my iPad mini when using iTunes remote.
I can stream to any Airplay capable system perfectlyvia Remote and control iTunes on my iMac as advertised.
Just want to be able to listen to iTunes on my iPad "wirelessly"Yay!
I discovered this lovely little forum entry that solved my problem!
(Remember this is for Windows, I'm not sure if the same will work for Mac)
This is what you do:
1: Have iTunes up and plug in your iPod.
2: Hold the Sleep/Wake and Home buttons down until the iPod shuts down.
3: When the screen is blank, release the Sleep/Wake and just hold the Home button down for about 15 seconds.
4: After then, iTunes will recognize an I iPod in Recovery Mode.
5: That's when iTunes will ask you to Update/Restore your iPod.
I'm pretty sure those are the steps.
(If anything is wrong, can someone fix it, please?)
But that really does work.
The writer said that his iPod was "stuck on the apple screen, and not going anywhere after that."
That was my issue, so hopefully this will work for you! -
Hi ,
I used to have an iPad 2 and i used a Griffin stylus with it and it worked fine on it, i used it to take notes on the iPad. But now i have an iPad mini and the stylus doesnot respond well on it , i have to really press hard to get it to work. Please,can anyone suggest me a stylus that will work well on iPad mini without having to press so hard and will respond smoothly.
ThanksIs this a serious reply?
-
What can be done to make my capacitive stylus work on my iPad mini?
I have the Griffin Pencil Stylus (which is capacitive), and it will not work on my iPad mini. Sometimes by chance I can make a mark in a drawing app and if I do, I have to press really hard on the screen. It has never worked while putting in my passcode etc. It works fine with my iPhone 4S, but that is not the device I intended it for. Any ideas as to what's going on or if I can do anything to make the stylus work with the iPad? Any help would be greatly appreciated.
You're welcome. This can be done any time things just don't seem to be working right (it's like rebooting your computer).
-
I am trying to send photos using iphotos. I just get a message saying your email did not go through because the serve did not reply, check your internet connection. Everything else is working, I can send normal emails and attach photos but not iphotos. What have I missed? Margee
I am trying to send photos using iphotos. I just get a message saying your email did not go through because the serve did not reply, check your internet connection. Everything else is working, I can send normal emails and attach photos but not iphotos. What have I missed? Margee
-
My iPad mini will not connect to the internet, My iPad mini will not connect to the internet
My iPad mini says my password to my internet router is incorrect. It's not incorrect. Help
Hello Courtney Devers,
It sounds like you are unable to join your Wi-Fi network with the error message saying the password is incorrect. I recommend these troubleshooting steps from the article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue persists I would next try the steps from this section down toward the bottom:
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling -
HT4528 Non apple email accounts not connecting to server. How do we fix this issue?
Non apple email accounts not connecting to server. How do we fix this issue?
Hello countingBLUEcars,
We've an article that can help get your Mail moving again.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen -
Dispatcher is running, but server not connected
Hello,
When I load the portal with the link http://sapbw:50000/irj/portal the page display this error
"Dispatcher is running, but server not connected"
In the log file defaultrace.trc is this details
#1.5#000F2097D58D004100000CC0000013C00003F973E869EFAE#1118701161401#com.sap.engine.services.servlets_jsp.Deploy#sap.com/webadmin#com.sap.engine.services.servlets_jsp.Deploy#J2EE_GUEST#18####23d60950dc5911d9bc08000f2097d58d#SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###Error occured in invoking event "valueUnbound()" on listener class com.sap.engine.webadmin.control.WebAdminClusterTreeGenerator. The http session is ApplicationSession[id=(sapbw_DBW_00)ID3830150DB20054430341437593419End]. The attribute is com.sap.engine.webadmin.TREE_GENERATOR. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: Method removeAttribute() is called in an invalid session.
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.removeAttribute(ApplicationSession.java:640)
at com.sap.engine.webadmin.control.WebAdminClusterTreeGenerator.valueUnbound(WebAdminClusterTreeGenerator.java:331)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebEvents.sessionValueUnbound(WebEvents.java:410)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebEvents.sessionValueUnbound(WebEvents.java:404)
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.invalidateSession(ApplicationSession.java:287)
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.validate(ApplicationSession.java:138)
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.removeAttribute(ApplicationSession.java:637)
Thanks very much for you help
DayanaHi Dayana,
This message occurs while the server is starting i.e starting the core services and delpoying the applications. From the above error message it is hard to
say what the problem is. Can you explain more on what is happening? Also generally it takes about 15 -25 minutes depends on the environment.
Also do you see any errors in the following log files
\usr\sap\XXX\JC00\work\std_server0.out ?
Regards
-Venkat Malempati -
Dispatcher Running Server Not Connected
Hi,
I have the same problem on Windows 2003 Server EP6 WAS640 SR1 SP9
I have the WAS640 for ABAP with the Java Add In and the Enterprise Portal installed on top.
When I try to connect to the Portal through a browser I get the message:
Dispatcher Running Server Not Connected
In the JCMON I cannot start Server0 and I get the errors 1,2,3,4 and it tries to start and then goes to status STOPPED
Does anyone know the solution ?
My system was working, the last change I made was to authenticate users against an SAP system and then I did a reboot and now the J2EE won't start.
Any help is much appreciated.
Thanks,
Tomas.some more info, this problem started after I configured the Portal to authenticate against the SAP system
In the portal system log for server.0.log there is the following info:
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: Anonymous principal not configured
at com.sap.engine.services.security.login.SecurityContext.setAnonymousPrincipal(SecurityContext.java:504)
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:150)
... 5 more
Caused by: com.sap.security.core.server.userstore.UserstoreException: Could not get user J2EE_GUEST
at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:187)
at com.sap.engine.services.security.userstore.context.UserContext.getUserInfo(UserContext.java:87)
at com.sap.engine.services.security.login.SecurityContext.setAnonymousPrincipal(SecurityContext.java:498)
... 6 more
Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "J2EE_GUEST" not found!
at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:334)
at com.sap.security.core.imp.DBTextFileUserAccount.<init>(DBTextFileUserAccount.java:56)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:339)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:277)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:371)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:366)
at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:183)
... 8 more
#1.5#00A0D1BC74B6001E0000000C0000118C0003F7536153ADF0#1116362417365#/System/Server##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_51##0#0#Error#1#/System/Server#Plain###Core service security failed. J2EE Engine cannot be started.#
#1.5#00A0D1BC74B6001E0000000E0000118C0003F7536153BD59#1116362417365#/System/Server##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_51##0#0#Fatal#1#com.sap.engine.core.Framework#Plain###Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.#
Is it possible to reset the configuration back to what it was, or back to a default configuration\like in EP5 ?
Thanks,
Tomas. -
Dispatcher Running; Server Not connected - J2ee Pos installation problems
Hi,
Got problem with starting J2EE Engine.
The message in the browser:
Dispatcher Running; Server Not connected - J2ee Pos installation problems
Chked up in the log files:
RFCEngine Server startup stopped.
com.sap.mw.jco.JCo$Exception(129)-JCO_Error_Server_startup
version of rfc driver is invalid.
Any help
Thnx
MeesumHi Rohin,
Is it true that jdk must be > 1.4.
Because I came across many places where it is explicitly stated that WAS 620 supports only jdk 1.3. pls let me know
Thnx anyway
meesum -
Clicking on a link in an open email will not connect me to the site?
Clicking on a link in an open email will not connect me to the site?
That is an Unsafe practice. What is shows YOU for the link is not necessarily where you will be sent when you click.
That is how spammers get malware onto your Mac.
It is tedious, but you should get in the habit of re-typing any links you need. -
Dispatcher running but message server not connected
Hi Guys,
I installed SAP netweaver 7.01 trial version and using MaxDB as database server.
When I start the NSB using SAPMMC, the message server is running but the disp+work.EXE is not working properly. It sometimes shows the status 'Running but message server not connected' and sometimes 'Running but que standstill'. It would be a great help if you could guide me to the solution of this problem.
DEV_MS file:-
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2148] Sat May 14 18:02:00 2011
[Thr 2148] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 0
intno 20020600
make: multithreaded, ASCII, optimized
pid 1484
[Thr 2148] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1484) [msxxserv.c 1853]
[Thr 2148] MsInitAclInfo: acl file F:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2148] MsGetOwnIpAddr: my host addresses are :
[Thr 2148] 1 : [10.10.0.10] DESKTOP5 (HOSTNAME)
[Thr 2148] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 2148] 3 : [192.168.1.8] desktop5 (NILIST)
[Thr 2148] Sat May 14 18:02:01 2011
[Thr 2148] MsHttpInit: full qualified hostname = desktop5
[Thr 2148] HTTP logging is switch off
[Thr 2148] set HTTP state to LISTEN
[Thr 2148] ms/icf_info_server : deleted
[Thr 2148] *** I listen to port sapmsNSP (3600) ***
[Thr 2148] *** I listen to internal port 3900 (3900) ***
[Thr 2148] *** HTTP port 8100 state LISTEN ***
[Thr 2148] CUSTOMER KEY: >S1138463071<
[Thr 2148] build version=701.2008.03.06
[Thr 2148] Sat May 14 18:03:20 2011
[Thr 2148] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from desktop5_NSP_00 [msxxserv.c 4711]DEV_DISP file:-
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 7
intno 20020600
make: multithreaded, ASCII, optimized
pid 2740
Sat May 14 18:02:02 2011
kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2740) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 7 successfully loaded
shared lib "dw_xtc.dll" version 7 successfully loaded
shared lib "dw_stl.dll" version 7 successfully loaded
shared lib "dw_gui.dll" version 7 successfully loaded
shared lib "dw_mdm.dll" version 7 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat May 14 18:02:11 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >desktop5_NSP_00 <
DpShMCreate: sizeof(wp_adm) 8232 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 057F0040, size: 4389744)
DpShMCreate: allocated sys_adm at 057F0040
DpShMCreate: allocated wp_adm at 057F1BF8
DpShMCreate: allocated tm_adm_list at 057F3C20
DpShMCreate: allocated tm_adm at 057F3C50
DpShMCreate: allocated wp_ca_adm at 05B904D0
DpShMCreate: allocated appc_ca_adm at 05B909D0
DpShMCreate: allocated comm_adm at 05B90E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05C11D30
DpShMCreate: allocated gw_adm at 05C11D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05C11DA0
DpShMCreate: allocated wall_adm at 05C11DA8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Sat May 14 18:02:12 2011
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Sat May 14 18:02:13 2011
***LOG Q0K=> DpMsAttach, mscon ( desktop5) [dpxxdisp.c 12204]
DpStartStopMsg: send start message (myname is >desktop5_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 7
Release check o.K.
Sat May 14 18:02:53 2011
my types changed after wp death/restart 0x9f --> 0x9e
my types changed after wp death/restart 0x9e --> 0x9c
my types changed after wp death/restart 0x9c --> 0x98
my types changed after wp death/restart 0x98 --> 0x90
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 14 18:03:03 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat May 14 12:33:03 2011
======================== -
Safari is not connecting to internet on my iPad. Says "could not open the page becuase the server stopped responding." Everything else that updates over wireless connection is working fine. Get same response on any site I try to visit. Need Help!
I am having identical problem on my iPhone 4 running iOS6. Did NOT experience this issue prior to upgrade.
-
Email showing not connected (bluetooth)
Good day,
I recently purchased a Z10 with Bell, and have a BMW X3, 2012.
Text message, contacts, calls all work fine.....however no emails make it to the vehicle.
When I check the setting on the phone, sms/mms show connected however email shows not connected.
Any ideas?Hey,
Welcome to the BlackBerry® Support Community Forums.
This may be a compatibility issue, I would suggest checking with car manufactures for more information on Bluetooth compatible smartphones, see here for more information:
BlackBerry smartphone Bluetooth car compatibility
http://www.blackberry.com/btsc/KB29616
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
HT1937 I can't do it w/not connected for my home w/IPhone4 WiFi. It's 2WIRE925 or. Please help?? (
I can't do it w/not connected w/WiFi from my home. It's IPhone4. Quote "Unable to join the network "2WIRE925". Why?? Please help me
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Cheers, Tom
Maybe you are looking for
-
For a few months, I have had problems syncing my iPad 1. It regularly fails on the backup step. It gets about 90% of the way through then stops. I can leave it for 8 hours and it still wont complete. iTunes wont let me stop the backup - all I can do
-
Need to retrieve the most recent record per deposit number
Can someone please show me a way to solve my problem or at least point me in the right direction. I have a simple bibliography table called mdd_biblio that has 3 fields: bib_mdd_no this is a deposit number bib_upd_by person who updated the record bib
-
SU numbers in outbound delivery
Dear all, I have following scenario: STO-Outbound Delivery-PGI-GR-TO In the delivery I have Su numbers informed in tab Items: Pallet Details, when GR is done via MIGO, then we execute LT06 for palletization, at this point we would like the system to
-
Is there any possible way to retreive an erased file aftyer emptied trash bin?
-
Unable to print preview adobe form
hi to all, i was developing a simple abobe form to display text fields with a single input. when i give print preview, the same input screen is displyed again but in display mode. i used latest adobe reader. please help me out. thanks in advance.