I can't right click wireless mighty mouse

My wireless mouse works fine on the powerbook but will not right click on my ImacG5 with 10.4.9
Is it likely to be due to incompatibilities. I crashed the finder with control click on a regular basis until I removed stuffit plugins from my contextual menu folders in library.
David

Hello David,
Try a firmware update for the iMacG5 and see if that solves the problem.
http://www.apple.com/support/keyboard/
Scroll down... on the right side of the page is has the download for the update:
Keyboard/Mouse Firmware Update 1.1.
Hopefully that will get your MM right clicking with your G5.
Carolyn

Similar Messages

  • TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working

    I have a 24" iMac, early 2009  Lion,10.7.5.  My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth.  I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
    My Mighty Mouse's right click stopped working as well. 
    I have gone through all of the troubleshooting steps-
    New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
    I am still having the same issue with both devices.
    Thank you.

    This is why you should always have a wired keyboard and mouse as backups.
    Try smc and hope for the best.
    I'd also suggest pram reset but you need the keyboard for that.

  • Right-Click w/ Mighty Mouse issue

    Alright, I set my mouse up right for the button being secondary and all that so that I can right click. However it only seems to work sometimes and on certain things. Is this normal? For example, when I right click a link in firefox it just opens the page. No right click menu. It drives me nuts. Or when I right click to try and copy highlighted text it won't do it. Grrr...
    Any advice or is it just a bug?
    Sarah

    Nevermind. It seems I have to click the very tip of the right side of the mouse. Not easy when you just want to click in the middle of the right side.

  • Need to right click a Mighty Mouse

    I'm used to right clicking my mouse. I just got a new iMac and find the lack of right clicking ability most distressing!!!

    Hello, 
    Check that you have "Secondary Button" set on the right hand side of your mouse:
    Click to enlarge.
    cheers
    mrtotes

  • Right Clicking With Mighty Mouse

    How would i go about right clicking?

    Make sure that you are not touching the left side of the mouse when you press the right side.

  • How can I right click without the mouse to bring up context menu?

    On Windows systems there is a special key that brings up the context menu of the currently focused item. I would like to be able to do the same on the Mac. I don't want to reach for the mouse every time I need to bring up the context menu as some applications rely heavily on those.
    Is it possible?

    No there is no contextual menu button or hot key combination for OS X. I'm sure there are some third-party applications that enable this, but nothing that I know of. You might search http://www.versiontracker.com for Mac applications/utilities that have to do with contextual menus, and see what pops up.

  • Wireless Mighty Mouse Looses Right Click Functionality

    I am using a new Wireless Mighty Mouse (about one month old) With new batteries.
    Since I started using it, the (secondary) right click would stop function after repeated use. After many frustrating trouble shooting attempts, I discovered that the Right Click will work again if the mouse is left idle for about 15 - 20 minutes.
    I will like to know if this is a defect that's inherent in the Mighty Mouse system, and if so, has anyone found a solution to this problem or is there a fix?
    Any input would be very much appreciated
    Mac G5. 2ghz DP   Mac OS X (10.4.8)  
    Mac G5. 2ghz DP   Mac OS X (10.4.6)  

    Unfortunately my experience suggests no. I'm on my 5th (or is it 6th?) wireless Mighty Mouse now, and they've all behaved just as you described. The latest replacement was only a week ago. I suspect the only point in replacing it further times would be to demonstrate that you've tried all you can. As far as I can tell, my only recourse at this point is convincing Apple to refund me, which is a shame because I like the scroll ball design.
    I should note that I'm in Australia, in case stock has been slower to update here, but it shouldn't make a difference...
    I've noticed that the problem seems to occur a lot more frequently under hot conditions - room heater on, hot hands etc. Could it still think the left button is being touched because it's warm and/or sweatier than usual?

  • Bluetooth Wireless Mighty Mouse only detect one button click

    I have had my Apple Bluetooth wireless Mighty Mouse for a little over a year and it has just recently began to only detect on button function, and cannot differentiate between left click, right click, or the scroll click.
    It behaves slightly differently under different settings. When I have the scroll click set to do ANYTHING, any click on the mouse will do that respective action. When I have the scroll click turned off, and the left is set to primary and right is secondary, it will do the Primary action. When I have the left set to secondary, and the right set to primary, it will still do the Primary action.
    I have looked all over the internet and have found very little help. The scroll wheel is fine so I don't really want to have to take it apart and glue it back together. Anybody know any tricks? Anything will help! Thanks!

    I found a partial fix over on this thread.
    Basically, the fix is to install the shareware program USB Overdrive and set up the buttons via its control panel. Then uninstall it.
    In my case, USB Overdrive brings my mouse back to normal operation, but when I uninstall it, my mouse goes back to acting like a one-button mouse.
    For now, I'll keep USB Overdrive installed. Maybe I can bill Apple for the $20!

  • With version 3.6.3 I can no longer do a right click with the mouse and check the properties of a live url link on web pages

    Windows XP Pro, SP3. Firefox 3.6.3. Ever since updating to this version a few weeks ago I can no longer do a right click of the mouse and check the properties of an active url link on webpages. I've always had the option before. I want this feature back!!!!

    In Firefox 3.6 Properties has been removed from the right click context menu.
    You can use ''View Image Info'' or ''View Page Info'' in the right click context menu to see the (image) properties.
    You can use the above mentioned extension (Element Properties 6) to get that context menu item back.
    See also Link And Forminfo: https://addons.mozilla.org/firefox/addon/6939

  • Ever since I installed the most recent Firefox, might right clicker on my mouse does not work. How can I fix this?

    When I log into Microsoft Outlook Web Access. I've always been able to use the right clicker on my mouse. Since I installed the new Firefox, I have not been able to use my right clicker. Any suggestions? Thanks.
    == This happened ==
    Every time Firefox opened
    == I installed the new Firefox

    Please can you be more specific as to what the issue is, when does it occur? Any error messages? every bit of information would help.

  • Wireless Mighty Mouse Right Button does not work well

    Recently I bought in Online Apple Store a Wireless Mighty Mouse.
    I installed the drivers that came in the CD, and, I defined in the System Preferences the second button of the mouse (the Right Button) to function as the Secondary Button.
    But after the computer going to sleep and I wakes it up, or I stop a little to work with the Mouse, or then without none apparent reason, the Right Button behaves as the Left Button, like if it had one and only button in the Mouse.
    To solve the problem I have to disconnect the mouse and/or the bluetooth connection, so that the Right Button functions again as I defined it in the System Preferences like a Secondary Button. But I think that is not the solution for who needs a mouse to work.
    Therefore, I thank you a solution to solve this problem.
    Sincerely,
    Paulo
    The computers where I worked with this Wireless Mighty Mouse and where I had this problem was:
    - a PowerBook 12", 1.5GHz
    - and a MacBook Pro 15", 1.83GHz
    - both with MacOS 10.4.8
    (Sorry for my bad english)

    There are a few threads going describing this problem Discussions. (E.g., check out this one.)
    It appears that there's probably a hardware QC issue with some fraction of the wireless Mighty Mice. Replacing the bad mouse -- either at a local Apple Store or via AppleCare online -- is what I'd suggest. (That's what I ended up doing and the replacement mouse has been fine.)
    Intel Mini 1.66 GHz, Mac Pro 2.66 GHz   Mac OS X (10.4.7)  

  • *SOLVED* Can´t right click in Openbox for Menu, Mouse poin......

    Hi all, i have this weird problem, well the title say it all
    this is my conkyrc file
    avoid flicker
    double_buffer yes
    #own window to run simultanious 2 or more conkys
    own_window yes
    own_window_transparent yes
    own_window_type desktop
    own_window_hints undecorate,sticky,skip_taskbar,skip_pager
    #borders
    draw_borders no
    border_margin 1
    #shades
    draw_shades no
    #position
    gap_x 6
    gap_y 6
    alignment top_center
    #behaviour
    update_interval 1
    #colour
    default_color ffffff
    #default_shade_color 0000003d352a
    own_window_colour 000000
    #font
    use_xft yes
    xftfont AvantGarde Md BT:pixelsize=12
    #bauhaus to prevent window from moving
    use_spacer no
    minimum_size 1262 0
    TEXT
    ${alignc}Kernel: ${color D7D3C5}$kernel | ${color}Processes: ${color D7D3C5}$processes ${color}Running: ${color D7D3C5}$running_processes | ${color}Cpu: ${color D7D3C5}${cpu}% ${color}Temp: ${color D7D3C5}${acpitemp}C | ${color}Mem: ${color D7D3C5}$memperc% | ${color}Batt: ${color D7D3C5}${battery} | ${color}Root: ${color D7D3C5}${font}${fs_free /} / ${fs_size /} | ${color}Home: ${color D7D3C5}${fs_free /home} / ${fs_size /home}
    I have it horizontal right now, but i want to make it vertical, but if the mous ponter is in the conkys "area", i mean the whole screen, i cant bring the openbox menu
    Screen:
    I tried changing, own_window_type desktop to normal, and i can do right click, but conky starts to flicker and everytime i right-click conky kinda dissapear, and i do have "db" loaded in xorg.conf : s
    Any help is really apreciated
    Last edited by AlmaMater (2007-09-25 02:00:55)

    Yes i did, but i get that "dissapearing thing" when i right click, i dont know why
    heres another screen to show that problem
    **EDITED**
    I fix it, by removing:
    use_spacer no
    minimum_size 1262 0
    Thanks for the help tho
    Cheers
    Last edited by AlmaMater (2007-09-25 02:00:13)

  • Connect Wireless Mighty Mouse to windows xp pro sp2 on bootcamp

    I recently installed windows xp pro sp2 on bootcamp i tried to hook up my Wireless Mighty Mouse and I got basically nowhere. I was able to get the computer to recognize it and i typed in the passkey "0000" and it knows that it is a bluetooth device and I changed the settings of the bluetooth to "always" be discoverable and still I have hit a dead end. I can still not seem to connect the wireless mouse in any way. What do I do???

    I FUIGURED IT OUT!!! omg im so happy right now. For anyone who might be wondering I'll tell you how to make it work it you had the same problem. Once you establish the mouse a device, highlight it in the devices menu, then click properties, then services, and once it is done searching check the box for the driver and click apply and your mouse should work.

  • Apple Wireless Mighty Mouse internal speaker not working !!!

    Recently I bought an used Wireless Mighty Mouse (first version with grey side buttons), the mouse is working perfectly minus the single little detail that I can not hear any clicking sound from the internal tiny speaker inside the mouse when I use the little scroll ball above the mouse or when I press the grey side buttons, is this normal or should I hear the clicking sound simulated by the internal speaker? is there a way to enable or disable the internal speaker by software? Maybe is disabled by default, I don't know. I really don't think the speaker could be damaged due to the rest of the mouse is working like a charm but maybe mine came without a speaker, could be? or maybe it got disconnected somehow. Any clues or ideas would be very helpful. Thanks !

    I know what a microswitch is, please look at these links, here are the proof there is (or maybe there was) a tiny speaker in some mighty mouse and wireless mighty mouse:
    http://arstechnica.com/uncategorized/2005/08/dissect/
    and this:
    https://discussions.apple.com/message/988965#988965
    and this:
    https://discussions.apple.com/message/1429358#1429358
    and this:
    http://www.youtube.com/watch?v=OOw04wTtlIo
    and this:
    http://macdailynews.com/2005/08/02/apples_new_mighty_mouse_provides_audio_feedba ck_for_clicking_and_scrolling/
    and I can keep giving you tens of links to proof you that actually there is (or maybe there was) a tiny speaker inside the mighty mouse and the wireless mighty mouse, If yours came without one it doesn't necessarily mean all came without one, right? That is why I asked you what version you have in order to figure out which ones does have the speaker and which one doesn't.

  • Random Loss of Secondary Button with Wireless Mighty Mouse 2

    Seems that Apple has locked the previous thread on this topic, though I don't know why. People are having issues with Apple hardware, so they lock the thread? Nice.
    I'm having this issue with my brand new WMM, and I got it for Christmas and I don't have a receipt. Serial# KY6470E02SE2A
    Will I be able to return this piece of crap mouse? The previous thread on this issue dates back to August 8th, 2006 and they haven't been able to fix this yet? Worse yet, they're still selling them! That's bad business if you ask me.

    I don't know for sure whether it's hardware or software. Since there has been no software fix issued for this OBVIOUS DEFECT yet, I'm assuming it's a hardware/design problem.
    I'm also betting that Apple won't respond to this thread as they didn't respond to the previous one. They did lock it however, so they must have seen all the people complaining about the problem.
    I'm really irritated about the arrogant people who recently posted the reviews for the wireless Mighty Mouse at the Apple Online Store. A few say, "Just lift your finger off the left button and right-click works like a charm." No it doesn't! My right-click doesn't work after 15 or so minutes whether no other part of my hand is touching the mouse or not. Perhaps their mouse works fine, but mine and many other's on this board do not. They should not be posting such statements as, "Don't listen to the people who can't right click with their Mighty Mouses. They just don't know how to use it." They haven't used mine, or seen me use it, so how the heck do they know? Their mouse isn't defective, so everyone else's must be perfect too? Ignorant twits. My mouse is defective, and this is a genuine problem.

Maybe you are looking for

  • HTTP Error 400 when trying to view a report

    We use MS Dynamics CRM 2013 SP 1 Rollup 2 on Windows Server 2012 and separate SQL Server 2012 on Windows Server 2012 as well. Only one user is affected by the issue. Other users with exactly the same Security Roles in CRM and Groups in Active Directo

  • Waves Platinum Native Bundle and 8.0.2?

    Anybody using waves platinum native in 8.0.2? I'm curious on how its running. Any problems?

  • Why do I get three unwanted apps with my new update?

    I don't really appreciate having new apps just put on my phone when I do an update. Not only adding apps I didnt ask for but they can't be removed that I can see.

  • IOS6 SDK Download included in Xcode 4.6.3?

    All, Is the IOS6 SDK included in the full download of Xcode 4.6.3?  If not, where can I get a copy of the IOS 6 SDK?  Thank you. - Jesse

  • HTML_DB Collection

    Hi In my applicaiton i have used date pop up collection, i need to validated this item before insert the dates into the tabel query i have used to generate the date picker is select HTMLDB_ITEM.DATE_POPUP(2,rownum,null,''dd-mon-yyyy'',10) "Baseline S