I can´t run fsck /dev/sda6 is mounted

How I can enter on unique user mode to umount my partition and run fsck. A day before I had it this problem with my archive system, my archlinux was working ok but after shutdown my computer and turn on again I had it this problem. Please I need help with this problem, i´m going insane with this.

Inxsible wrote:
learn to use the edit functionality instead of posting consecutively.
Read the forum rules and abide by them.
joelvilabringuez wrote:is my home partition but anyway it doesn´t work mate
This is the most useless comment. What doesn't work? Were there any errors? Please don't post half assed answers.
In addition, I think posting the exact commands you used would be helpful.

Similar Messages

[SOLVED] /dev/mapper/ dm : UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY

I'm trying to boot my system from multiple machines using only a USB. I have a PC & MacBook Pro. When I have built & configued my system correctly from my MacBook Pro, I have tried to boot it from PC as well to make sure the boot process has no errors.
Booting from MacBook Pro is completely fine (1st boot). After that, I have tried to boot from a PC and the boot process is also fine (2nd). However, when I went back to MacBook Pro to boot my system again (3rd boot), I get an error:
systemd-fsck: /dev/mapper/<dm_name>: Superblock last mount time (Tue Dec 3 15:25:41 2013,
systemd-fsck: now = Sat Jan 19 18:29:54 2013).
systemd-fsck: /dev/mapper/<dm_name>: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
systemd-fsck: (i.e., without -a or -p options)
I did run fsck and it says:
fsck from util-linux 2.24
e2fsck 1.42.8 (20-Jun-2013)
/dev/mapper/<dm_name> is mounted.
e2fsck: Cannot continue, aborting.
However, when I just run reboot, the error has disappeared but everytime I switch to PC and then go back to MacBook Pro, I get that error and it disappear after I reboot.
Can anyone explain to me why I get that error? is the problem related to time configuration? how to configure it so that it wont get that error again.
I appreciate your help :)
Last edited by heyom (2013-12-03 18:29:52)

Yes, it's related to time config. Apparently, the clock on your PC is correct but the clock on your Mac is very incorrect (Jan 2013). You need to synchronize the clocks.

Cannot mount or run fsck on filesystem

Yesterday, our helpdesk crew had to shutdown our systems due to overheating in our lab. After bringing up one of our servers, one of its filesystems could not be found. Below is what I see from the /var/adm/messages:
Apr 10 12:41:54 unode2 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinf
o@0
Apr 10 12:41:55 unode2 scsi: [ID 107833 kern.warning] WARNING: /pci@6,4000/scsi@
4,1 (glm3):
Apr 10 12:41:55 unode2 SCSI bus DATA IN phase parity error
Apr 10 12:41:55 unode2 glm: [ID 663555 kern.warning] WARNING: ID[SUNWpd.glm.pari
ty_check.6010]
Apr 10 12:41:55 unode2 scsi: [ID 107833 kern.warning] WARNING: /pci@6,4000/scsi@
4,1 (glm3):
Apr 10 12:41:55 unode2 Target 0 reducing sync. transfer rate
Apr 10 12:41:55 unode2 glm: [ID 923092 kern.warning] WARNING: ID[SUNWpd.glm.sync
widebackoff.6014]
Apr 10 12:41:55 unode2 scsi: [ID 107833 kern.warning] WARNING: /pci@6,4000/scsi@
4,1/sd@0,0 (sd45):
Apr 10 12:41:55 unode2 SCSI transport failed: reason 'tran_err': retrying comma
nd
Apr 10 12:41:56 unode2 hme: [ID 517527 kern.info] SUNW,hme0 : PCI IO 2.0 (Rev Id
= c1) Found
Apr 10 12:41:56 unode2 pcipsy: [ID 370704 kern.info] PCI-device: network@1,1, hm
e0
Apr 10 12:41:56 unode2 genunix: [ID 936769 kern.info] hme0 is /pci@1f,4000/netwo
rk@1,1
Apr 10 12:42:01 unode2 genunix: [ID 454863 kern.info] dump on /dev/md/dsk/d2 siz
e 5724 MB
Apr 10 12:42:01 unode2 hme: [ID 517527 kern.info] SUNW,hme0 : Internal Transceiv
er Selected.
Apr 10 12:42:01 unode2 hme: [ID 517527 kern.info] SUNW,hme0 : 100 Mbps Full-Du
plex Link Up
Apr 10 12:42:07 unode2 scsi: [ID 243001 kern.warning] WARNING: /pci@6,4000/SUNW,
qlc@3/fp@0,0 (fcp0):
Apr 10 12:42:07 unode2 Failed to create nodes for pwwn=216000c0ff884ad2; error=
5
Apr 10 12:42:08 unode2 scsi: [ID 243001 kern.warning] WARNING: /pci@6,4000/SUNW,
qlc@3/fp@0,0 (fcp0):
Apr 10 12:42:08 unode2 Failed to create nodes for pwwn=256000c0ffc84ad2; error=
5
Apr 10 13:00:35 unode2 pseudo: [ID 129642 kern.info] pseudo-device: tod0
Apr 10 13:00:35 unode2 pseudo: [ID 129642 kern.info] pseudo-device: tod0
Apr 10 13:00:35 unode2 genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Apr 10 13:00:35 unode2 genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Apr 10 13:00:36 unode2 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 10 13:00:36 unode2 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 10 13:00:36 unode2 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Apr 10 13:00:36 unode2 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Apr 10 13:00:38 unode2 There are no devices (controllers) in the system; nvutil
terminated.
Apr 10 13:00:38 unode2 Array Monitor initiated
Apr 10 13:00:38 unode2 RDAC daemons initiated
Apr 10 13:00:39 unode2 /usr/lib/osa/bin/arraymon: [ID 712306 user.error] No RAID
devices found to check.
Apr 10 13:00:39 unode2 rdriver: [ID 400281 kern.notice] ID[RAIDarray.rdaemon.100
1] RDAC Resolution Daemon locked in memory
Apr 10 13:00:39 unode2 rdriver: [ID 400281 kern.notice] ID[RAIDarray.rdaemon.100
1] RDAC Resolution Daemon locked in memory
I cannot run fsck or mount back to what it suppose to be. Looking at previous reports, this is how the file structure use to look:
/dev/dsk/c68t216000C0FF884AD2d0s0 62493372 2142901 59725538 4% /disk6
/dev/vx/dsk/rootdg/vol02 7559245 1602962 5880691 22% /disk1
/dev/md/dsk/d3 4032504 734383 3257796 19% /opt
/dev/vx/dsk/rootdg/vol01 7559245 3388798 4094855 46% /disk0
/dev/vx/dsk/rootdg/vol03 33263336 22259082 10671622 68% /disk2
/dev/md/dsk/d5 6552557 1813979 4673053 28% /export/home
How can I resolve this issue?

As it turns out, someone had turned off the storage array during the shutdown on sunday and no one ever powered back up. So when the server connected to the storage device was booted up, it could not see the file system. But even when I turned on the storage array, the server still could not mount to the filesystem residing there. The server had to be rebooted to re-sync with the storage array.
Our database users can now access the filesystem. Thank you all for your help.

How to run fsck.vfat for USB-stick during cRIO-9030 boot?

Hi all,
we have a cRIO-9030 with a USB-stick. Sometimes after power loss the USB-stick filesystem (FAT32) gets corrupted and has to be checked/fixed. How can I configure cRIO LinuxRT to do that?
I've checked /etc/fstab, but it looks that the USB-stick is mounted somewhere else. I run mount - here is the line:
/dev/sdc1 on /media/sdc1 type vfat (ro,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,quiet,errors=remount-ro)
It would be nice if I can run fsck.vfat /dev/sdc1 every boot or when an error is detected.
Thanks in advance,
Nikolai

Hi NickViz,
My name is Ed form National Instruments Technical Support, I have researched into the topic and found that it is possible to use the 'System Exec.vi' to complete the command during the initialization of your RT application.
You simply need to input your commands as a string just as you would to command prompt/terminal (depending on OS), you can also execute commands via SSH however this is one way communication between the RT application and the command shell.
I have included some links below to articles which describe the methodology as well as give some further explanation into the NI Linux Real-Time OS.
http://digital.ni.com/public.nsf/allkb/AFCAC25164CDBD4C86257C6A00545CD5?OpenDocument
http://digital.ni.com/public.nsf/allkb/9822A3A39B1D0CBB86257C55006B962A
http://www.ni.com/white-paper/14626/en/
I hope this is helpful and you achieve what it is you need, do note you will need to enable SSH scripting as described in the article on using PuTTY for your Real Time device.
Kind Regards,
Ed

Can't run helloworld of Google App Engine (python 2.7)

I looked and searched for the bug and found the post. -> See comment 29
But, it seems that it's still not fixed in google-appengine 1.6.4 for python 2.7.
The exact error is: (Trying to run the helloworld given in docs)
WARNING 2012-04-06 23:26:00,928 py_zipimport.py:139] Can't open zipfile /usr/lib/python2.7/site-packages/setuptools-0.6c11.egg-info: IOError: [Errno 13] file not accessible: '/usr/lib/python2.7/site-packages/setuptools-0.6c11.egg-info'
Full terminal output:
shadyabhi@MBP-archlinux ~/codes/gae $ dev_appserver.py helloworld/
INFO 2012-04-06 23:25:55,030 appengine_rpc.py:160] Server: appengine.google.com
INFO 2012-04-06 23:25:55,034 appcfg.py:582] Checking for updates to the SDK.
INFO 2012-04-06 23:25:56,709 appcfg.py:616] This SDK release is newer than the advertised release.
WARNING 2012-04-06 23:25:56,710 datastore_file_stub.py:513] Could not read datastore data from /tmp/dev_appserver.datastore
INFO 2012-04-06 23:25:56,773 dev_appserver_multiprocess.py:647] Running application dev~helloworld on port 8080: http://localhost:8080
INFO 2012-04-06 23:25:56,774 dev_appserver_multiprocess.py:649] Admin console is available at: http://localhost:8080/_ah/admin
WARNING 2012-04-06 23:26:00,928 py_zipimport.py:139] Can't open zipfile /usr/lib/python2.7/site-packages/setuptools-0.6c11.egg-info: IOError: [Errno 13] file not accessible: '/usr/lib/python2.7/site-packages/setuptools-0.6c11.egg-info'
ERROR 2012-04-06 23:26:01,101 wsgi.py:189]
Traceback (most recent call last):
File "/opt/google-appengine-python/google/appengine/runtime/wsgi.py", line 187, in Handle
handler = _config_handle.add_wsgi_middleware(self._LoadHandler())
File "/opt/google-appengine-python/google/appengine/runtime/wsgi.py", line 239, in _LoadHandler
raise ImportError('%s has no attribute %s' % (handler, name))
ImportError: <module 'helloworld' from '/home/shadyabhi/codes/gae/helloworld/helloworld.pyc'> has no attribute app
INFO 2012-04-06 23:26:01,110 dev_appserver.py:2884] "GET / HTTP/1.1" 500 -
ERROR 2012-04-06 23:26:01,479 wsgi.py:189]
Traceback (most recent call last):
File "/opt/google-appengine-python/google/appengine/runtime/wsgi.py", line 187, in Handle
handler = _config_handle.add_wsgi_middleware(self._LoadHandler())
File "/opt/google-appengine-python/google/appengine/runtime/wsgi.py", line 239, in _LoadHandler
raise ImportError('%s has no attribute %s' % (handler, name))
ImportError: <module 'helloworld' from '/home/shadyabhi/codes/gae/helloworld/helloworld.pyc'> has no attribute app
INFO 2012-04-06 23:26:01,486 dev_appserver.py:2884] "GET /favicon.ico HTTP/1.1" 500 -
Any kind of help would be highly appreciated.
Last edited by shadyabhi (2012-04-07 15:46:54)

If you're using python2.7 libraries there's an error with the tutorial
This line is incorrect:
application = webapp2.WSGIApplication([('/', MainPage)], debug=True)
The correct line should be:
app = webapp2.WSGIApplication([('/', MainPage)], debug=True)
If it is asking for an "app" attribute, your code helloworld must have this attribute.
See http://stackoverflow.com/questions/1005 … python-2-7

Can we run itunes as a service on windows

Can we run itunes as a service? If not we really need the dev team to step up and fix it.
With the new option for sync over wifi we really need a service that runs in the background of our home pc's for the sync. As you know this takes place everytime you apply power, or when you hit the sync now button. So, unless we run itunes in its fullest all the time we can't count on the wifi sync to do what it is designed for. Running itunes eats up computer resources that some people need when doing school work, job work, and other important things. So please build a new version of itunes that allows it to run in the background and serve as a sync service.
Anyway this might be the wrong place for a suggestion but hopefully someone will get it to the right people.

Take a look at something called java service wrapper ,
http://wrapper.tanukisoftware.org/doc/english/introduct
on.htmlNot seen that one before. Ta.
Alexandria software used to support a simpler app called JavaService... google for that maybe if the above is too much.
/k1

UNIX: problem running an DEV & QA environment using form/report servlets

UNIX: problem running an DEV & QA environment using form/report servlets
I am trying to setup on one server an DEV and QA environment using the Forms Servlet, Forms Listener Servlet and Report Servlet.
I think I have the Forms Servlet and Forms Listener Servlet running properly. The problem is setting up the DEV and QA environment for running reports.
For example, when in DEV environment I would like to run a report from a directory specified in the REPORTS60_PATH. This doesn't seem possible.
It might be easier if I describe my configuration first:
DEV: run all forms and reports from the directory /data/release/dev
QA: run all forms and reports from the directory /data/release/qa
---DEV & QA Settings Forms Listener Servlet:
zone.properties:
# DEV
servlet.fl60dev.code=oracle.forms.servlet.ListenerServlet
servlet.fl60dev.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev.env
# QA
servlet.fl60qa.code=oracle.forms.servlet.ListenerServlet
servlet.fl60qa.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/qa.env
---DEV & QA Settings Forms Servlet:
servlet.f60servlet.code=oracle.forms.servlet.FormsServlet
--- Settings for Reports Servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
Custom Env files since we are using Developer 6i Patch 7
dev.env and qa.env
Here I specify FORMS60_PATH and REPORTS60_PATH,
eg: DEV -> FORMS60_PATH=/data/release/dev
REPORTS60_PATH=/data/release/dev
likewise for QA ../qa
In the formsweb.cfg file i have something like:
[dev]
serverURL=/servlet/fl60dev
form=test.fmx
[qa]
serverURL=/servlet/fl60dev
form=test2.fmx
I have tested the following and they work without problems:
1. forms listener test page, eg: http://webserver:7777/servlet/fl60dev
2. running forms from the 2 environments
eg: http://webserver:7777/servlet/f60servlet?config=dev
this runs the form in the FORMS60_PATH (/data/release/dev)
Now my problems start with Reports.
When I run a report from forms (using run_report_object) it will not run any reports
as specified in the REPORTS60_PATH
Even using this url:
http://webserver:7777/servlet/RWServlet?server=rep60&report=test.rdf&destype=cache&desformat=html&
userid=scott/tiger@test9i
It NEVER seems to pickup and use the REPORTS60_PATH. I have tried nearly everything.
I have gone throught the instructions in "Integrating Oracle9iAS Reports in Oracle9iAS Forms -
White Paper"
(http://otn.oracle.com/products/forms/pdf/277282.pdf)
and Forms6i Patch 7: Oracle Forms Listner Servlet for Deployment of FOrms on the Internet
(http://otn.oracle.com/products/forms/pdf/p7listenerservlet.pdf)
plus any other documents in metalink relating to forms, or report servlets. I am
totally confused, please help.
I have tried setting the REPORTS60_PATH in the following files without success:
custom.env (as specified by initArgs=EnvFile in zone.properties)
jserv.properties
in the zone.properties I have tried to set a custom env file for the report servlet:
servlet.RWServlet.code=oracle.reports.rwcgi.RWServlet
servlet.RWServlet.initArgs=EnvFile=/u01/app/oracle/product/ias/6iserver/forms60/server/dev_rep.env
NO LUCK.
The only place that I can set the REPORTS60_PATH
is in "[6iserver home]/reports60_server" file when I start the reports server (did I even
get this right - I do have to have a reports server running don't I?)
Does this meaan I have to run multiple report servers for each of my environments?
Based on all the documentation I thought that REPORTS60_PATH as specified in the files relating
to the forms servlet would be the place to specify the path.
As you will understand I am getting really fustrated with this and it seems to
me that the reports servlet configuration in 6i is really half baked and since 9i
is coming out it will never be fixed.

I am even not able to run forms servlets from two different forms60_path, Is there any configuration do you make other than what you have mentioned in this post.
I already open a TAR in this regard, I am still waiting reply from ORACLE.
Thanks,
Shaik Ather Ahmed

Can anyone suggest why Dev Studio can't see the server engine

We have NW2004s/SP08 installed. The server J2EE engine runs fine and one can log into the server and succssfully deploy jar's directly to it.
We also have Dev Studio installed on a desktop and it works fine. We have our J2EE preferences set using the actual IP address of the server J2EE engine and port number 3061. (We can ping this IP address successfully.)
When we try to do a Deploy/Run from Dev Studio and monitor this attempt on the server side, we can see Dev Studio trying to connect.
But it doesn't connect. In Dev Studio, we just get a message saying "sdmhost empty or unknown".
What's missing in our config? It was set up for us by externals no longer here. Since we can successfully ping the IP of the server from the PC, and since we can see DevStudio trying to connect, it can't be a network connectivity problem.
Thanks for any suggestions as to where to look/what to do.

Pascal -
I am indebted to you for your kindness in taking the time to answer such a trivial question.
I assume that because the client is now asking me for the SDM password, your solution is correct. (It didn't ask me for a password before - I just got the error message.)
So I've tagged your reply for 10, even though I don't know the password so can't completely confirm yet.
I'll cycle back and confirm once I have the password.
Thanks very much again.
Dave

MBP only runs if I start in single user mode and run fsck. WHY!

I am having trouble with my MBP. If I don't start in single user mode and run fsck -fy twice, I can't click on anything with my trackpad. I can't even log in. I've tried resetting pram/nvram, disk permission repair too but once i reboot... nada. I can't do anything in recovery mode, I can move around with arrows and tab but can't select anything. Safe mode hangs at about 20% and doesn't budge (left it for an hour, nothing). If I run fsck -fy it works but as soon as I reboot/ logout i'm back to square one again. Anyone know what causes this to happen? It just started tonight. I have a 2012 15" with Mountain Lion.

The boot drive is failing, or you have some other hardware fault.
Back up all data immediately, then make a "Genius" appointment at an Apple Store to have the machine tested.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

RoboHelp Server 8 -- can it run on LINX

We're a Linx shop. Can we run RoboHelp Server 8 on it. It says Windows. However, Tomcat and Apache can run on Linx so why can't RoboHelp Server 8?

RoboHelp Server 8 can run on Windows only. Though Tomcat and Apache can run on linux but there are some windows specific components in RoboHelp Server 8 and hence you cannot run it on Linux.
Tulika.
RoboHelp Server Dev Team.
Adobe.

OK to run SQL Dev 2.1 as well as 1.1.3???

Hi,
My Oracle client tools include SQL Dev 1.1.3.
I have separately installed SQL Dev 2.1.1.64.
Completion Insight does not work at all. Yes, I have it turned on and have adjusted the speed. It just never fires. When I try CNTL+Space nothing happens.
Completion Insight works fine on 1.1.3. Can you run both versions on 1 PC? If you can, what else could be causing CI to not work?
TIA,
Dave
Edited by: 846097 on Mar 21, 2011 1:40 PM
Edited by: 846097 on Mar 21, 2011 1:41 PM

Thanks for the reply.
OK, I've discovered that Completion Insight DOES work, but it doesn't "start" to auto complete until the I type the 5th character following the dot (.)
i.e.
SELECT * FROM DB-OWNER.PS_PA...
Completion Insight kicks in once the "A" is typed. When I use SQL Dev 1.1 it kicks in as soon as the period (.) is typed following the DB owner name.
Is that a setting I can change?

Can't run non-UNICODE-DbSl against UNICODE database

Hi everyone. I get this error during the update of Solution Manager 7.1 SPS4 (dual stack) to SPS10. It is a green install. This happens during the
phase PREP_EXTRACT/PREIMP! Of the ABAP stack. Step 5.2. I do not see a lot of people with this problem, so I assume it is something I am doing wrong, as it is my first time using the tool SUM.
Details of the system:
Solution Manager 7.1 SPS4
Windows 2008 R2 64 bit
Microsoft SQL 2008 R2 64 bit SP1
Central installation type with all components on
the same host
Kernel level 600
Here is what I have done so far:
Downloaded the media as described in the installation
guide.
Worked my way through the install using the
Software Provision Manager 1.0
Updated the Kernel from level 401 to 600, by
copying the files from the download folder to the F:\usr\sap\SM1\SYS\exe\uc\NTAMD64
folder. This is the folder that is assigned to the DIR_CT_RUN parameter.
I start the STARTUP.BAT file in the SUM folder.
I then start the SUM GUI and run through the
steps and in step 3 I map the Stack configuration file (XML) to one listed in
the folder “51047130\DATA” called “SPS10_stack.xml”
Then I
get to 5.2 where the system stops with this error:
Severe error(s) occurred in phase PREP_EXTRACT/PREIMP!
Last error code set: Single errors (code <= 8) found in logfile 'PREIMP.ELG'
ERROR: Detected the following errors:
# F:\usr\SUM\abap\log\R710VPE.<DB>:
      4 ETW000 TRACE-INFO: 19: [    dev trc,00000] Driver: sqlncli10.dll Driver release: 10.50.2769                                3938 0.039733
      4 ETW000 TRACE-INFO: 20: [    dev trc,00000] GetDbRelease: 10.50.2769.00                                                      1603 0.041336
      4 ETW000 TRACE-INFO: 21: [    dev trc,00000] GetDbRelease: Got DB release numbers (10,50,2769,0)                                21 0.041357
      4 ETW000 TRACE-INFO: 22: [    dev trc,00000] Can't run non-UNICODE-DbSl against UNICODE database                              2647 0.044004
      4 ETW000 TRACE-INFO: 23: [    dev trc,00000] CheckCodepageType failed. Connect terminated.                                      13 0.044017
      2EETW169 no connect possible: "DBMS = MSSQL                            --- SERVER = '<SERVER>' DBNAME = '<DB>'"
Can
anyone please help?
PS:
The admin user that I use do have access to the database. It is listed with
sysadmin role and the default DB is the Solution Manager db.

ERROR: Detected the following errors:
# F:\usr\SUM\abap\log\R710VPE.<DB>:
      4 ETW000 TRACE-INFO: 19: [    dev trc,00000] Driver: sqlncli10.dll Driver release: 10.50.2769                                3938 0.039733
      4 ETW000 TRACE-INFO: 20: [    dev trc,00000] GetDbRelease: 10.50.2769.00                                                      1603 0.041336
      4 ETW000 TRACE-INFO: 21: [    dev trc,00000] GetDbRelease: Got DB release numbers (10,50,2769,0)                                21 0.041357
      4 ETW000 TRACE-INFO: 22: [    dev trc,00000] Can't run non-UNICODE-DbSl against UNICODE database                              2647 0.044004
      4 ETW000 TRACE-INFO: 23: [    dev trc,00000] CheckCodepageType failed.
As per error, you have used wrong kernel. Please make sure that you use unicode kernel as your system is also unicode.
Thanks,
Sunny

How Can One Run Only In The System Administrator ( ie root ) ?

Upon creating a System Administrator ( ie root ) in Command + R , of course after Clean Installing OS X ML with my own specific Apple Verified Account ,
i have the Log In screen from a startup , either Safe Boot or a Boot , and i have my own specifc Apple Verified Account , plus the Other... ,
which the Other... of course is the System Administrator ( ie root ) .
How Can One Run Only In The System Administrator ( ie root ) ?
Is there a way in Terminal with sudo su to make it work ?
Shall i just always log in with Other... System Administrator ( ie root ) , and just forget the my own specific Apple Verified Account ?

As of EHP3, you could still install some EHP components. On an ERP 6.00, you could just push SAP_APP to 6.03 and move on. Now if you want another component in your system with an EHP4 version, you can't have some components at EHP3 and some at EHP4. You would install EHP4 for the new component you desire updated and part of the work will be to also update SAP_APP to 6.04.
EHP4 is an UPGRADE process, with shadow instance & all the joy of an upgrade process. You can either run ressource minimized or downtime minimized. In resource minimized, the shadow instance runs on the same server as the main instance. Downtime minimized allow to run the shadow instance on a separate / new server. Anyway you go, you will always have a "Downtime Phase" when you bring back the updated components from the shadow instance toward the real production one.
As with any UPGRADE project, the benefits of installing EHP4 for your business has to weighted against the downtime cost.
Our tests so far on small systems (few data, few users, 120GB database) show ~3 days process from EHP3 to EHP4 (all components) with a downtime phase of about 22 hours using the "resource minimized" path, i.e. shadow & main instance on the same server (4 CPUs, 16GB RAM). Until you give a try at your Sandbox or DEV systems, you won't have realistic figures for your environment.
Good luck!

Can I run Mountain lion?

From what I can see online it's saying I can't run Mountain lion on my iMac however if I go by just the spec's alone it seems I could run it. I'm not sure if I should just go ahead and try to see if it runs or not so I thought I would post the spec's here and see.
Model Name:
iMac
Model Identifier:
iMac5,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.16 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
667 MHz
Boot ROM Version:
IM51.0090.B09
SMC Version (system):
1.9f4
I don't have much in the way of documation for this iMac as it was purchased from a college auction in the summer. However I do know that this college is know for going with higher end models and addding extra stuff to their machines to handle the Adobe Creative Suits better.
Also the main reason for me wanting to update this iMac is because as I have other apple products and it seems like iCloud will help me keep things in sync better. As a heavy users of iCalendar I would love to have this sync acrros all my devices.
The devies in question that I want to sync besides the iMac are a MacBookPro5,5, iPhone 4, and a iPad with Retina display
Also I take it, it's safe to assume my MacBookPro5,5 will run Mountain Lion just fine?
P.S - When I download Mountain Lion from the app store can I use it on both my machines or is it a single use download?

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Why the Oracle Coherence can not run successsfully?

Why the Oracle Coherence can not run successsfully?
When I run the costomized cache-server.cmd file, the following error message shows up:
C:\coherence\examples\java> *contacts-cache-server.cmd*
2009-10-22 10:57:10.609/0.563 Oracle Coherence 3.5.2/463 <Info> (thread=main, member=n/a): Loaded operational configur
ion from resource "jar:file:/C:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2009-10-22 10:57:10.624/0.578 Oracle Coherence 3.5.2/463 <Info> (thread=main, member=n/a): Loaded operational override
from resource "jar:file:/C:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2009-10-22 10:57:10.624/0.578 Oracle Coherence 3.5.2/463 <D5> (thread=main, member=n/a): Optional configuration overri
"/tangosol-coherence-override.xml" is not specified
2009-10-22 10:57:10.624/0.578 Oracle Coherence 3.5.2/463 <D5> (thread=main, member=n/a): Optional configuration overri
"/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.5.2/463
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-10-22 10:57:11.062/1.016 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=n/a): Loaded cache configurati
from "file:/C:/home/oracle/coherence/Contacts/contacts-cache-config.xml"
2009-10-22 10:57:12.078/2.032 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Service Cluster joined
e cluster with senior service member n/a
2009-10-22 10:57:15.328/5.282 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Created a new cluster
cluster:0xD3FB" with Member(Id=1, Timestamp=2009-10-22 10:57:11.734, Address=192.168.16.83:8088, MachineId=30803, Loca
on=site:metsys.metex.com,machine:NECu10,process:3820, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, Cp
ount=4, SocketCount=4) UID=0xC0A81053000001247CC05C3678531F98
2009-10-22 10:57:15.375/5.329 Oracle Coherence GE 3.5.2/463 <D5> (thread=Invocation:Management, member=1): Service Man
ement joined the cluster with senior service member 1
2009-10-22 10:57:15.875/5.829 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:PartitionedPofCache, member=
: Service PartitionedPofCache joined the cluster with senior service member 1
2009-10-22 10:57:15.890/5.844 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:PartitionedPofCache, membe
1): Loading POF configuration from resource "file:/C:/home/oracle/coherence/Contacts/classes/contacts-pof-config.xml"
2009-10-22 10:57:15.906/5.860 Oracle Coherence GE 3.5.2/463 <Error> (thread=DistributedCache:PartitionedPofCache, memb
=1): Terminating DistributedCache due to unhandled exception: com.tangosol.util.WrapperException
2009-10-22 10:57:15.906/5.860 Oracle Coherence GE 3.5.2/463 <Error> (thread=DistributedCache:PartitionedPofCache, memb
=1):
(Wrapped) (Wrapped: error configuring class "com.tangosol.io.pof.ConfigurablePofContext") (Wrapped: Failed to parse PO
configuration (Config=contacts-pof-config.xml)) java.io.IOException: Exception occurred during parsing: looking for id
, found id=3((0,0,65) Character Data Literal {\rtf1\ansi\ansicpg1252\deff0\deflang4105{\fonttbl{\f0\fmodern\fcharset0
urier;}{\f1\fmodern\fcharset0 Courier-Bold;}{\f2\fswiss\fcharset0 Arial;}}
{\*\generator Msftedit 5.41.21.2500;}\viewkind4\uc1\pard\f0\fs18 )
        at com.tangosol.coherence.Component._newChild(Component.CDB:47)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onServiceStarted(
stributedCache.CDB:99)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onServiceState(Grid.CDB:23)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.setServiceState(Service.CDB:8)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.setServiceState(Grid.CDB:21)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$NotifyStartup.onReceived(Grid.CDB:
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(Distribu
dCache.CDB:3)
        at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
        at java.lang.Thread.run(Unknown Source)
Caused by: (Wrapped: error configuring class "com.tangosol.io.pof.ConfigurablePofContext") (Wrapped: Failed to parse P
configuration (Config=contacts-pof-config.xml)) java.io.IOException: Exception occurred during parsing: looking for i
9, found id=3((0,0,65) Character Data Literal {\rtf1\ansi\ansicpg1252\deff0\deflang4105{\fonttbl{\f0\fmodern\fcharset0
ourier;}{\f1\fmodern\fcharset0 Courier-Bold;}{\f2\fswiss\fcharset0 Arial;}}
{\*\generator Msftedit 5.41.21.2500;}\viewkind4\uc1\pard\f0\fs18 )
        at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:49)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.instantiateFromBi
ryConverter(DistributedCache.CDB:3)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BackingMapContext
etClassLoader(DistributedCache.CDB:6)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BackingMapContext
nInit(DistributedCache.CDB:2)
        at com.tangosol.coherence.Component._newChild(Component.CDB:41)
        ... 10 more
Caused by: (Wrapped: Failed to parse POF configuration (Config=contacts-pof-config.xml)) java.io.IOException: Exceptio
occurred during parsing: looking for id=9, found id=3((0,0,65) Character Data Literal {\rtf1\ansi\ansicpg1252\deff0\de
ang4105{\fonttbl{\f0\fmodern\fcharset0 Courier;}{\f1\fmodern\fcharset0 Courier-Bold;}{\f2\fswiss\fcharset0 Arial;}}
{\*\generator Msftedit 5.41.21.2500;}\viewkind4\uc1\pard\f0\fs18 )
        at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
        at com.tangosol.io.pof.ConfigurablePofContext.report(ConfigurablePofContext.java:1311)
        at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:812)
        at com.tangosol.io.pof.ConfigurablePofContext.initialize(ConfigurablePofContext.java:762)
        at com.tangosol.io.pof.ConfigurablePofContext.setContextClassLoader(ConfigurablePofContext.java:325)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:45)
        ... 14 more
Caused by: java.io.IOException: Exception occurred during parsing: looking for id=9, found id=3((0,0,65) Character Dat
Literal {\rtf1\ansi\ansicpg1252\deff0\deflang4105{\fonttbl{\f0\fmodern\fcharset0 Courier;}{\f1\fmodern\fcharset0 Couri
-Bold;}{\f2\fswiss\fcharset0 Arial;}}....
{code}
The content of the contacts-cache-server.cmd file is shown here under:
(its location is C:\coherence\examples\java
{code}@echo off
setlocal
if (%COHERENCE_HOME%)==() (
set COHERENCE_HOME=c:\coherence
set CONFIG=C:\home\oracle\coherence\Contacts
set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\coherence\Contacts\classes
set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
:exit{code}
The contents of the contacts-cache-config.xml file is shown here under:
(its location is C:\home\oracle\coherence\Contacts
{code}<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
    <cache-mapping>
        <cache-name>*</cache-name>
        <scheme-name>ExamplesPartitionedPofScheme</scheme-name>
      </cache-mapping>
    </caching-scheme-mapping>
<caching-schemes>
    <distributed-scheme>
      <scheme-name>ExamplesPartitionedPofScheme</scheme-name>
      <service-name>PartitionedPofCache</service-name>
      <serializer>
        <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
          <init-params>
            <init-param>
              <param-type>String</param-type>
              <param-value>contacts-pof-config.xml</param-value>
            </init-param>
          </init-params>
       </serializer>
     <backing-map-scheme>
       <local-scheme>
         
             <high-units>250M</high-units>
             <unit-calculator>binary</unit-calculator>
          </local-scheme>
       </backing-map-scheme>
       <autostart>true</autostart>
    </distributed-scheme>
</caching-schemes>
</cache-config>{code}
The contents of the contacts-pof-config.xml file is shown here under:
{code}
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>
    
    <include>coherence-pof-config.xml</include>
    
    <user-type>
      <type-id>1002</type-id>
      <class-name>com.tangosol.examples.model.Contact</class-name>
    </user-type>
    <user-type>
      <type-id>1003</type-id>
      <class-name>com.tangosol.examples.model.Address</class-name>
    </user-type>
    <user-type>
        <type-id>1004</type-id>
      <class-name>com.tangosol.examples.model.Phone</class-name>
    </user-type>
</user-type-list>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config> {code}

I have saved it as a XML documetent. it this OK?
What the following error message shows us?
Caused by: (Wrapped: error configuring class "com.tangosol.io.pof.ConfigurablePofContext") java.lang.UnsupportedClassVer
sionError: Bad version number in .class file
        at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:49)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.instantiateFromBina
ryConverter(DistributedCache.CDB:3)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BackingMapContext.s
etClassLoader(DistributedCache.CDB:6)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BackingMapContext.o
nInit(DistributedCache.CDB:2)
        at com.tangosol.coherence.Component._newChild(Component.CDB:41)
        ... 10 more
Caused by: java.lang.UnsupportedClassVersionError: Bad version number in .class file
        at java.lang.ClassLoader.defineClass1(Native Method)
        at java.lang.ClassLoader.defineClass(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.access$100(Unknown Source)
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClassInternal(Unknown Source)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Unknown Source)
        at com.tangosol.util.ExternalizableHelper.loadClass(ExternalizableHelper.java:2969)
        at com.tangosol.io.pof.ConfigurablePofContext.loadClass(ConfigurablePofContext.java:1215)
        at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:973)
        at com.tangosol.io.pof.ConfigurablePofContext.initialize(ConfigurablePofContext.java:762)
        at com.tangosol.io.pof.ConfigurablePofContext.setContextClassLoader(ConfigurablePofContext.java:325)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:45)
        ... 14 more
2009-10-22 17:24:14.995/2.922 Oracle Coherence GE 3.5.2/463 <D4> (thread=ShutdownHook, member=2): ShutdownHook: stopping
cluster nodeEdited by: junez on 22-Oct-2009 14:30

I can´t run fsck /dev/sda6 is mounted

Similar Messages

Maybe you are looking for