I can't safe reboot if I choose my user account, no problem with the rest or user's accounts
Hi to all,
Since I've installed ML and also after 10.8.1 upgrade, my account is behaving very strangely.
It does seem to work, but every time I restart in my account, it takes ages and starts up app I've already closed (as if it was frozen when restarted), I get Toast 10, Disk Utility, App Store, Safari, Mail and Photoshop. Slowly, very slowly, in this order. I had improved, as I had some reboots with the Mountain Lion installer asking to instal Mac OS X!
Oddly enought, that first times Finder didn't show when I pressed Cmd-Tab for changing applications, it would show only if I clicked on the Desktop.
I did a clean install of ML and imported from Time Machine. I also did a "upgrade install", that is, over what I had (already ML).
I can't restart or close down unless I do it on the cold way, that is, pressing the power butto, as I can get no shutdown dialog, and if I choose from the Apple Menu, no matter what I choose, nothing seems to happen. Same when I choose "About this Mac", nothing happens, I have to manually open System Profiler.
But, in contrast, I can open from the Apple Menu App Store with no problems, for example.
Now I reboot and shutdown my Mac thanks to the Terminal!
Another "minor" inconvenient is that my Mail Rules weren't imported, and I don't know how to pass them to the new Mail, so all my Mail lies there in the "Inbox" unclassificated
If I go to a different user, then everything works apparently. So it must be something I have added, but it can be something installed many System versions before, so I have no idea on how to track it down, although I've deleted many old applications and preferences, including some problematic Fonts, Perian, etc.
I tried safe boot, but when I enter in my user, screen turns light gray and it doesn't start anything, so I have to force a cold shutdown again with the power button and restart again.
Safe boot with a different account has no problem again.
Sorry for the looong explanation, but, although I can work in my user, I'm worried as my work slows down a lot.
Thanks in advance to any help you can give me!
Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!
Similar Messages
-
This problem suddenly started happening, it wasn't when I installed an update of Firefox. I can use other search engines ok (safari etc.) I have also unistalled Firefox then re-installed and the same problem still occurs.
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
I have been charged 4 times for an in app purchase when I only wanted 1 , does anyone know how I go about getting a refund?
mikeYou can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
I tried to move my images (over 25,000) to an External Hard drive to open up some memory, hoping to make my computer run faster. It took three hours to move the images and I see them all in the mac's menus. However when I try to open them with iPhoto now, none appeared. and when I tried to import them back to the main HD they come in to iPhoto just fine, but not with the albums nor any of the massive organization i'd created in the original. this represents years of images, and I can't imagine that I'd have to recopy them into folders/albums again.
Terrance Devlin answered a similar question back in April of last year. He said to make sure the ExHD is formatted to MAC OS Extended (Journaled) and to move the library to the ExHD and then open iPhoto with the option button and select "Choose Library" from the resulting menu.
Command "I" tells me that the new drive is formatted correctly. I can't locate the "Choose Library" when I open iPhoto with the opt button.
First, I wondered if the application needs to be on the same drive as the Library. I sure would like to know if I can find out how to restore all the folders I had them in. Terrance's advice helped the user that had asked the question.
Here's the url for that archived discussion: https://discussions.apple.com/thread/3849933?start=0&tstart=0
Can anyone help? I'm using iPhoto 5. My MAC is an OS X version 10.4.11.
thanks, brokenlomHere are Apple's instructions:
If you are using iPhoto ’06 or earlier, you will need to follow these steps to tell iPhoto where the Library is now located:
Hold down the Option key on the keyboard and open iPhoto. Keep the Option key held down until you are prompted to create or choose an iPhoto Library.
Click Choose Library.
Locate and select the iPhoto Library in its new location.
(from http://support.apple.com/kb/HT1229 )
Below (in the link below) is what you should see when holding down the option key and opening iPhoto. Keep holding down the option key until this dialogue comes up. You want to select the Choose Library button.
http://appleclinic.wordpress.com/2008/04/06/change-default-dir-iphoto/ -
Please help me, I have a mid 2010 Mac book pro with a toshiba mk3266gsxf harddrive. It started making a clicking noise and then my computer crashed. I proceeded to boot in safe mode, but it doesn't work. When I ran disk utility in recovery mode, it showed no problem with my disk. Does any one know what the problem is?
Sounds like a mechanical problem with the drive and it ruined the sectors where the Macintosh HD partition (and OS X, and files and programs) reside, but not your Recovery HD partition.
If you held command option r while booting, that's Internet Recovery and it's loaded via the Internet, not via the Recovery HD partition on the boot drive, so that could mean the drive is dead mechanically or there is another issue.
In either case the drive will likely have to be replaced, it's a matter of what occured to where and the drive state if you can recover data or not. If you made recent backups then your fine.
My computer is not working, is my personal data lost?
Most commonly used backup methods -
hello
I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifiRead here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware issue. -
I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?
try rebooting your computer.
-
Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
Thanks!
AngelaYou may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
Best of luck. -
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
TS1702 Problems with the app Drive Safe Mode.
Have other users experienced problems with the app Drive Safe Mode? I can't use it, it's frozen, doesn't do anything at all. I use an iPhone5. I shut off the phone twice, I uninstalled the app and reinstalled it, nothing works. Tks for your help,
samwise57Contact the app's developer. Apple does not provide support for apps purchased from the iTunes Store except the ones they provide like iWork apps.
-
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Problem with the MenuBar and how can i delete a own component out of the storage
Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
MatzeIf you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder. -
I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.
As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.
Maybe you are looking for
-
Had to restore, now how do i get my stuff back on my phone?
I hate sounding stupid, but apparently I am. I had to restore my iPhone 3GS to original settings. It said it was going to restore all my contacts, but it did not, it is like a brand new phone. On my iTunes, it shows all my apps, and I'm hoping it sti
-
Links no longer work after signing document
Links no longer work after signing document - I have updated to latest version and run installation repair, is this a problem or is it supposed to do that?
-
Creating dll, lib, fp's to be used in other CVI programs
Disclaimer: I am a self-taught CVI (and C) programmer in which I learned from examples, NI forums, and google Main question: What is the proper way to create a dll, lib, and fp to be used in other CVI programs? What I am doing is creating a "wrapp
-
My mobile has been cut off before i was able to put the new sim in my new phone
my mobile has been cut off before i was able to put in new sim in new phone. i feel vulnerable without the use of it. can you therefore put it back on so i can sort the problem out. i am paying for this contract and need to use it thanx
-
Hi I have used this and downloade a patch-bundle (tar-file) In this patch-bundle there is a lot of zip-files. But like the 8_Recommended.zip there is not a patch-order list. Do I have to make such a patch-order list myself ?? Must i check each patch