I can't scan from my HP photosmart premium, now that i updated my Lion software. Can anybody help?
i can't scan from my HP photosmart premium, now that i updated my Lion software. Can anybody help?
http://support.apple.com/kb/HT3669 for starters.
Similar Messages
-
Can no longer scan from my HP Photosmart C 4650 to my computer since upgrading to Maverick
I can no longer scan from my HP Photosmart C 4650 to my computer since I upgraded to Maverick. I have to use image capture to do so. Are there any fix's out there?
My C4680 works w/o any issues in the last four OSs. You might want to reinstall the 2.16.1 driver update.
-
I can't scan from my HP Photosmart C4440; not direct from the scanner to pc nor vice versa
I can't scan from my HP Photosmart C4440; not direct from the scanner to pc nor vice versa, Please help me ASAP, Thanks everyone, I'm stuck with a homework!
Hello @Roberto3 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues scanning. I'd like to help!
Are you able to make a copy as opposed to a scan?
Do you have any errors come up when scanning?
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.
Hi Shlomi
It worked!!! Thanks so much, I've been messing about with this for hours.
As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
Any thoughts you have would be much appriciated
Rob -
I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .
I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2). -
I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?
I looked for plugs in in my library but the folder internet plugs in is empty
-
i have just download a book from itunes store but, since i don't have an iPad, i can´t read it or even see it. Can anybody help me? Can i convert it? Thanks.
Every purchase page for an ebook has a section that says "Requirements". What does that say for your particular book? That should give you the answer to your question. Conversion is normally not possible.
But there are some exceptions. Please provide the Title of the book if you want further help. -
When I set up my iPhone, I accidentally put in an apple ID that doesn't exist. Therefor, I don't know the password and can't delete my account from iCloud. I was trying to sync my contacts to my iPad and now it's not possible without iCloud on my phone. Can anybody help?
Have you tried changing the admin password in System Preferences > Users & Groups > Password ??
The Apple ID that is associated with your admin password is noted there.
message edited by: cs -
Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks
Is this a movie from iTunes? If so is it a rental or one you've purchased?
-
Since my last update to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?
update 10.8.5 solved this problem. Thankyou anyway.
-
i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
i can't download/install apps (like skype) in my iphone 5 from apple store....it shows error code-1009.... can anybody help me...?
The error 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions
-
I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?
Are you trying to download apps from the Sudan app store? If so, you have to have a valid credit card and billing address in the country of the app store to purchase from that app store.
Some countries also have restrictions on the apps and functions allowed in their countries. -
I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??
I don't follow your instructions... mine goes Settings->General->Cellular and from there it's just on/off options for Cellular Data, Enable 3G, Data Roaming, etc. Or I could go Settings->General->Profile APN Carrier Settings but when I click that it just shows as verified but no Visual Voice APN or MMS Settings. If I click More Details it goes to Signing Certificate which has a bunch of parameters for unlockit.co.nz but I am unable to change anything.
I just updated my iphone 3GS to IOS 6 and my internet (wifi and 3G), voice and text all work, but the only thing I can't do is send/receive pictures via text message. I am using At&t prepaid sim. I tried turning off the phone completely but I'm trying to avoid a complete restore.. at least until I can understand the problem better! Any help would be appreciated!
Thank you! -
How can I restore my iPad Air to factory settings as I don't have internet on my laptop. After I erased everything from settings. It shows to restore n update through Apple server. Pls help!
Without internet connection there is no way for you restore the iPad.
Maybe you are looking for
-
What are the switches I can add to the subject line of an eprint email?
I see some commands listed here and there but nothing comprehensive in a single location. If it were a command line I would enter "eprint -?" to get the help text listing all available commands.
-
We have given the values required for the extraction. When I click on start Extraction button,its showing "Extraction started".but,when I click on display jobs button,showing "Job list is empty". Error log shows... Transaction Canceled 00 671 Task :
-
Fill a table in a wordtemplate
Hallo, I need to fill a table in a word template with data from a measurement. I have bookmarked the table in the template (it has 2 columns and 5 rows). The following try failed: Can anybody help me?! Thanks Solved! Go to Solution.
-
Data Loss in DB to DB Transformation in ODI
Hi, I am facing data loss when I am trying a transformation for a DB to DB mapping in ODI. I have two tables in two different schemas with the following specifications. In ODI designer model of i have put the type of place as number in target and pla
-
To change the string in Class Builder "New Method"
HI friends, Im using the std program of "RFDOPR10"...(changed into my customised program as ZRFDOPR10)..... Here i want to change the strings of Id_type eq 4 availble under the class builder "New Method". "id_ruler_string = '2.13.24.29|43|58|73|88|10