I can't see a new report in quality

Hello,
I made up a new form and then a report in development environment and did the trasport to quality, all ok, but when I execute the transaction KE30 the new report there isn't but. Note that in development it is visible. I guess that it could be that I have to activate the new report o what it can be?
Thanks,

I found the problem

Similar Messages

Can not see the new appending fields in RSA6

Hi,
I add one appending structure to existing datasource, after that I can not see the new field in RSA6, RSO2. However I can see it from RSA2 and SE11 (for extract structure).
Any idea?
Thanks
Victor

Victor,
can you tell me how u have done this. you have a DS in RSA6 created from RSO2. then you created a append structure right? then click on your DS on the RSA6 screen. click on change icon on the application tool bar or function key CTRL + SHIFT +F1, maintain the datasource.
can you able to see the fields here or not (i'm asking for change mode)?
Nagesh.

My itunes can't see my new ipad ..did everything what day said on the apple web and still nothing ..help

my itunes can't see my new ipad ..did everything what day said on the apple web and still nothing ..help.....

What is "everything"?
First, be sure you are using the most recent version of iTunes.
Use a different cable and USB port.
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

HT1430 I can't see any new email messages that I get. I can see my old messages. I sent an email to my self, I see it in my sent box but not in my in box

Need help..I can't see any new email messages on my iphone or ipad. I can only see old messages. I sent something to my self. I see it in the sent box but not in my inbox

Delete your account and start fresh. You should be able to see the downloads on a fresh install.

MBP 5.5 can't see my new Hard drive

MBP 5.5 can't see my new Hard drive even though its running Mavericks off the new Hard Drive through a usb cradle

I've seen suffienct posts on this site to not argue about the problems with SATA cables, however it sounds like what you're saying is that the SATA cable is bandwidth limited. The types of things I remember reading about are actual breaks in the cable, rendering it useless for all drives, or the insulation wearing off. In the latter, it's on units where the cable crosses over an optical drive and starts intermittently shorting out on the case. If this happens the user typically gets data corruption, but the drive is usually seen and visible.
On the other hand, I do software development and we have to be able to boot numerous versions of MacOS. For reasons known only to God (and Apple, I hope) once in a while the NVRAM seems to get mixed up and ends up being unable to see the boot drive. Doing the resets always corrects the problem.
I wouldn't dismiss your recommendation of replacing the cable, but the resets are free and easily done.
Another freebee to try would be to hold down the "alt' key before powering on the unit, turn on the power, and then, while holding down the alt key, see if the drive shows up as a bootable drive. This will only work if there's an OS installed on the drive.
In my opinion, it's always best to try the free things before going out and buying anything.

HT4528 I can't see the new light blue font on many of the displays. Is there a way to change this color?

I can't see the new light blue font on many of the displays. Is there a way to change this color?

No you can change your wallpaper to make the font stand out more on your homepages and folders or you can adjustr the font size, bold and contrast here:
Settings > General > Accessibility
NOTE: Turning Bold text on will force your phone to reboot.

HT3228 I can't see the new email from my iPhone

I can't see my new email using my iPhone.
The only way I can do it is to open the email app then slide to the end of the inbox then load more messages & this is the only way instead of the normal way which is to open the mail app & then the iPhone will check for new emails automatically.
So If didn't check the emails that way I will never know about the new emails.

Hello,
Please use the following steps to solve your issue:
Settings > Mail, Contacts, Calendars > Fetch New Data > Push: On > Fetch: Every 15 Minitues
Note: These settings will affect your battery life. You will see a increase in the time between needed charges. Just so you know.
Regards,
Jake

Can't see any new podcasts/apps in iTunes 11.2.1

I'm running iTunes on an iMac, OS X 10.7.5. For several weeks, I have been unable to see or subscribe to any new podcasts in the itunes store, period. Previously I could see a new podcast, but could not see its individual episodes. I can still see podcasts I have already subscribed to and am able to download episodes. I can also see music, music, and iTunes U contend, but apparently not all TV shows. Anyone else having this problem and know a solution?
Have not seen this particular problem posted yet.

Ok, I just updated to Mavericks 10.9.3, in hopes that this would do something, but I'm still having the same problem. Has anyone else run into this? Really frustrated!!

Can't see my "new site"

I have created a website, then created new pages, sure I can do that, but now, after creating a "New Site", and I can see it and edit it in iWeb, but when i go into iWeb on my "new site" and go "view published site" . . . I cannot see it published... I keep getting this error "We're sorry but we can't find the iWeb page you've requested. It's possible that.." So I put it in as a link to this site I can't see, as a reference off my home page, but it STILL get the same error! Why would this be? I could post my website if that will help solve the problem...
Is there a limit to the number of "sites" one can create in iWeb?
Thx...

Actually, upon MORE review... the only page that DOES work off my site is my welcome page!!! http://web.mac.com/thetopspot/TopSpot_JocelynKish/Welcome.html what is going on?!?
After saving and "publishing", it says "do you want to visit site"... sure, all looks good, but obviously it is not working!??!?

HT201365 Can I turn off this update. I can't see the new lighter colors.

Can I uninstall this new update? I cannot see the new lighter colors.

Hi Hazel,
From what I have read here it is not possible to downgrade - I wish it was!!!
Some replies say that people should have researched what iOS7 would look like before upgrading but to be honest I just did not believe that it could be as bad as it turned out to be.
I have sent feedback to Apple here and would encourage you to do the same - they need to know how difficult it is now the visual contrasts are so poor:
http://www.apple.com/feedback/iphone.html
If you go to Settings -> General -> "Accessibility" it helps a little to do this:
Larger type: ON
Bold text: ON
Increase Contrast: ON
I found that the "Invert Colors" option did not help as it made many controls even more difficult to see!
I have never had to use the Accessibility settings before - the design of iOS7 is a wonderful if unwelcome illustration of the Social Model of Disability in action! Apple used to excel at accessible design. The difference between iOS7 and all previous versions illustrates perfectly that bad design is disabling!

After compiling, I can't see the (new) topic...

I am using RH 8 HTML, I use WebHelp as my primary layout on Windows XP.
I created a new topic, saved it, compiled it, but then I can't see it on the topics list on the left once I've generated my project. What's going on? Can someone please help me?
Thank you.
(Font used in all topics: Verdana)

You haven't broken any protocol. My point was that this thread is about a topic not appearing and that has been resolved.
I could not see a link between that and your question and I still cannot. You seem to have been having a problem with the time taken to publish, nothing to do with a specific topic not getting published.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

When can we see the new updates coming to the cc

when can we access The New updates that were announced before NAB 2015 ? like the Morph Cut and the Colour correction updates from Lumetrie?

Hi there,
Updates which were announced in NAB 2015 are "coming soon"
Read more here - http://blogs.adobe.com/creativecloud/coming-next-to-adobe-pro-video-tools/?scid=social4315 6416&adbid=881757421867592&adbpl=fb&adbpr=341657335877606
^Ani

I can't see the new version of yahoo in firefox!

I can't use the new theme and other apps in new version of yahoo at my firefox!
I reinstalled it but it didn't work!
what can I do?
Please help me.
Tnx

If you get an error message that you do not have sufficient permissions or have other problems with updating to update then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Can't see my new iMac on my PC's thru my wireless network.

I can see both pc laptops on my iMac and the laptops can see each other.
But. I can't see the iMac on my pc laptops.
I would like to share ALL files and folders not just my public file.
Any help would be appreciated, I've been working at it for 2.5hours.
Thanks, Jean

Yeah, you will have to obtain the mac's IP address on the local network in System Preferences>Sharing, and 'hard enter' that in to the PC side's Network Neighborhood depending on your OS. One thing to keep in mind is susceptibility to intruders/viruses whenever you open up and share, say 'everything' as you said. Just throwing bit of caution. Lots of variables here..

How can I see only new topics from selected spaces on one page?

Just wondering how can I do the subj.
For instance, Im interested only in Database space, and only in several sub-spaces like high availability, upgrade, general.
So, I would like to see new topics only from these areas on single page. how can I do this?
Currently, in order to check for new questions, I need every time to go to every space, then select sub-space, go back, select another subspace. This is very inconvenient, slow and takes server resources as well.
Regards
Ed

You have to select Track in Communications under Actions in the Overview view of the appropriate forum space you are interested in. You should then receive notifications under Communications and can filter by "unread". If you don't want email notifications, you need to set it OFF in your user preferences. For more detailed info, see my previous post here:

I can't see a new report in quality

Similar Messages

Maybe you are looking for