I can't see BI_JDBC_CONNECTOR in J2EE 6.30 Vis. Admin

Please help. What should be done to solve this problem? I have BW 3.5 and J2EE 6.30. I'm going to configure UDConnect to make extration in BW.

Yes, this is wrong forum!
Nevertheless here is the answer of your question
http://service.sap.com/bi ->
Services & Implementation ->
HOW TO Guides ->
Guide List SAP BW 3.5 ->
Business Intelligence ->
How to… Configure UD Connect on the J2EE Server
This is the short link
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000612433&_SCENARIO=01100035870000000112&_OBJECT=011000358700009469952004E
Have fun,
Angel

Similar Messages

  • Can't see my two Airport Express in the Admin Utility

    I have a 12" PB and two Airport Extreme.
    I am unable to see the two Airport Extreme stations through the Airport Admin Utility - but (here comes the strange part) - I see them both in my router's DHCP Active IP Table (freshly updated too).
    Both base stations show a green light.
    iTunes does not see any of them either...
    Any idea what could be the problem? Do I have to 'free' some ports in the router for them to work?
    Any hints appreciated!
    Mario

    I just tried something - in the Airport Admin Utility, instead of waiting for the base stations to show up, I clicked on 'Other' and entered the IP address. Well, I can edit/modify/reset both of them! This is driving me nuts. They seem to identify themselves fine on the network, but none seems to do the right thing! (I use one as my AirTunes, the other as my wireless printer connector).

  • Where can i see which user(s) has access to Discoverer Admin or desktop?

    Hello
    I am new to a company. Where can i see which employees have access to Discoverer Admin and / or Desktop editions?
    So i want to know 2 things:
    1. Who are the discoverer users in the company?
    2. What reports do they have access to?
    thank you
    Edited by: iandekoker on Feb 20, 2009 2:46 PM

    Hi,
    If the user has Discoverer Administrator/User installed on there PC then they will have access to the tools. They will also need Admin or Desktop access to the Discoverer EUL. You can install the Discoverer V5 Business Area and run the EUL Management workbook to see all the Discoverer users, what privileges they have and which workbooks have been shared to the users/roles. See metalink note 556932.1 for details of how to install this Business area which is shipped with Discoverer Admin.
    Rod West

  • Can't see my Airport Extreme base station

    I wanted to upgrade my Base station's security to WPA2. So I went to the Airport Admin utility - But the base station does not appear there. My base station is set to be a close hidden network so I suppose that was the reason why it didn't appear.
    So I decided to reset the base station. After pressing the reset button for 10sec
    I went back to my PB and noticed that my wireless network name was changed to Apple Network ###### (which indicate that the Base station reset) BUT I still can't see my base station in my Airport Admin Utility.
    1. Is there another way to reset the base station? did I do it right ?
    2. Is there a way to see my hidden base station in the Airport Admin Utility ?
    I know that I can log to a specific address (+password) but which one
    should I use ?
    Thanks
    Eric

    If you press and release the reset button on the base station, it will restart. If you unplug the power, then plug it back in, it will reboot. Holding the reset button like you did will cause the base station to revert to factory specs, meaning that you lost all of your customizations. So you have to re-configure the base station now.
    If your PowerBook was connected to your network, you should see the base station in the Admin utility. Did you check to make sure you were connected to the network before you went into the Airport Admin Utility?
    Doc

  • Can't see AE when connecting to a wireless network

    Hi there,
    I'm having problems joining my AE to an existing wireless network. I've configured the AE using the Airport Setup Assistant (I chose the 'setup new base station' option, and then 'connect to current wireless network'). The AE is glowing solid green. But, I can't see it at all in my Airport Admin Utility, or in the Airport status icon in my menu bar.
    Can anyone suggest what I should do?
    iBook   Mac OS X (10.4.5)  

    Sorry for a tardy reply but I've been out of the country. I'm a very basic guy so whenever I have experienced anything similar to your situation, I go to the beginning. I hard reset the ae, run it through setup assistant (vs. admin.) tell it I want to join the existing network enabling iTunes, naming the unit, etc. The only difference in what it sounds like you're doing and what I did was enable the unit to act as a WDS remote (I wanted to extend my range) feeding from the base. it sounds as though the unit can be seen but it is stretched for range. If you elect to do the hard reset, move your ax as close as reasonable to your existing base. After you have done the setup, the light will turn green, then flash amber (twice as I remember) and turn solid green again. You can then unplug it and move it where you need it. I am running three units to three stereos and the furtherest is about ninety feet away with multiple walls. It feeds off the closest ae which is only about thirty feet and the whole thing works as an all select or single select system with iTunes. I have airfoil from rogue amoeba but I have not found it to be as reliable in broadcasting to mutiple units as iTunes. Try it again (I hate to ask) and let us know.

  • Can't see webdynpro applications in webdynpro administration

    Hi all,
    I've installed ess and mss business packages on portal. But I can't see the respective applications nd jco connections in webdynpro administration. Any clue what could be wrong here. I am using EP 7.0.
    thanks,

    Hi,
    Have you deployed these webdynpro applications on you server where the portal is installed?while deploying WebDynpro application, in J2EE configuration, configure the J2EE engine.
    Regards,
    Ameya

  • Hi all - how can i see the history of support package

    hi have install new support package .
    and now i want to view the history of the sp ,  where can i see it ?
    eyal

    Hai,
           if you want to see the history of support package for JAVA (Web AS JAVA),
    Goto the URL : <b>http://<host name>:<http port of Java stack>/</b> --> select System Information --> Show all components --> it will display all Java SP's that you have deployed in your J2EE engine.
    regards,
    Gopinathan.

  • How can I see Calendar event END times at a glance?

    How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
    I am running OSX 10.9.3.

    It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
    Apple - Mac OS X - Feedback

  • Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

    I am looking in this table with SQLPlus and TOAD and can not see any rows.

    Hi Hussein;
    First I ran:
    select fu.user_name, fr.responsibility_name
    , fu.user_id, fr.responsibility_id resp_id
    , furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
    from apps.fnd_user_resp_groups furg
    , apps.fnd_user fu
    , apps.fnd_responsibility_vl fr
    where furg.user_id = fu.user_id
    and upper(fu.user_name) = upper('&User_Name')
    and furg.responsibility_id = fr.responsibility_id
    order by 1, 3
    Passing in SYSADMIN
    Taking this row:
    SYSADMIN,General Ledger Super User,0,20434,101,0
    I ran:
    I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
    I still get no rows returned.
    Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

  • Can not see historical data in Time Machine backup

    Hi folks
    First my setup:
       MBP Late2012
       Samsung Evo 840 SSD
       external USB 3.0 1TB as TimeMachine HD
       Mac OS X Mavericks
    Now my problem.
    After updating to Mavericks I've made a full backup with Time Machine.
    Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
    A clean setup of Mavericks follows.
    After that I restored the Backup from Time Machine.
    Everything ok. Til now.
    Because everthing works fine in the past, I did not control the Time Machine.
    Today I wanna restore a File from my "Pictures" folder.
    So I opened Time Machine.
    Oops.
    There I can only see the latest run.
    Also in the timeline on the right side the only entries are TODAY and NOW.
    I can not scroll into the past.
    All windows behind the current window have a black titlebar.
    In Mountain lion the titlebars are grey if there is data available
    and the title contains the date of the backup.
    What is the problem?
    Is there a bug?
    Did I something wrong?
    Thanx in adv.
          Stoiker

    Hi masong517
    What a treasure trove of hints and solutions.
    I didn't know this page.
    But  you are right with "E2".
    This solved my problem.
    Thank you very much.

  • Can not see the data in the grid

    Hi,
    nice to see the new features, but I can not see the the table inserts
    in the data grid - the <data> rider is not clickable.
    Regards

    Hi annerose,
    This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
    1) Back up any important Raptor files, e.g. connections etc.
    2) Remove the existing Raptor Rel 1 installation folder
    3) Install Raptor Rel 2
    Hope this helps
    ady

  • How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

    I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
    Help!
    Thanks

    Deleting an iCloud account only deletes it from the Device, not from iCloud.  In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens.  Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device.  It will redownload to the device should you sign back into the account.
    The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days.  When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question.  However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days.  When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload).  Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this.  If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

  • My photos just became empty boxes, if I click on them they open, but I can't see them at a glance. Anyone know why? thanks

    My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
    Regards
    TD

  • I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

    I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

    Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
    A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
    Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
    Also, I'm not a lawyer so don't take this as legal advice.

  • Can you see a image in the Get Info Window?

    After upgrading to Mt LIon and while using CS6, I can't see image previews in the Get Info window.  Can't see images in the upper left corner of the get info window, so I can't make a selection and then do a copy- paste like I could do before I upgraded to Mt Lion with CS6.  I want to be able to paste a image of the subjects in my folders..  IE folder of Panda Bears would have a image of a Panda showing on that folder.  Folder of The Great Wall would have a image of the Great Wall on the Folder of Great Wall pictures.  This has always worked for the past many years I have used a Mac and Photoshop.  I started with Photoshop 2.  All my photo folders are represented by images so I have a good idea of what is contained in each folder.  Now after 2 weeks in China, 20 folders are represented by 10-11-12, 10-12-12, 10-13-12, 10-14-12 and so on.  Shows me nothing but dates.  I have tried saving as Jpeg, Tiff, and PAD, and still can't  do a copy-paste in the Get Info window.   Apple says it is a Adobe problem, Yesterday Adobe told me it is because I am uusing a Nikon D800 and Adobe does not have a  patcdh for the NEW Nikon camera.  I then tried using my Nikon D2Xs, Nikon D3X, Nikon 800 and even my wife's D50 and none of these camera allow me to copy paste the thumbnail image to the clipoboard like I have been able to do for YEARS...   I can see images in a folder in Bridge, but the images dont show in my desktop folders.IE, a folder on my desktop with 200 pictures only show with words/ numbers/letters NO IMAGES appear in the folders on the desktop.  On some folders the folders in a folder don't show up as Folders either.
    Can Any one help me.  Same thing happens on my MACPRO w 16 GB Ram and on my 17" MacBook Pro.

    Allan Sicks wrote:
    Thanks for your input.  Problem might be with the EASTER BUNNY..... have to have someone to blame.
    I can't blame you for saying that.
    Adobe is the clear owner of the responsibility to make functional their product that they claim is compatible with your operating system.  Adobe is the one who sold you the product.
    I just went looking for what Adobe has said about Mountain Lion compatibility, and they both list Mountain Lion as compatible and include such language as that on this page (emphasis mine):
    Adobe and Apple have worked closely together to test Adobe® Creative Suite® 5, 5.5 and CS6 editions and individual products for reliability, performance and user experience when installed on Intel® based systems running Mac OS X Mountain Lion (v10.8). Earlier versions of Adobe Photoshop® (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues.
    I suggest that Adobe needs to get on the ball and get this fixed.  The time for user patience is over.
    If someone from Adobe is saying "Adobe can't fix it" then that someone is at the wrong authority level and/or is thinking on the wrong level.
    This is business and the business is making products that have value and are sold to people who perceive that value.  Adobe doesn't get to keep selling products that don't work while standing on principles that "it's someone else's problem".   Customers don't care why it doesn't work. 
    It's obvious to a child that if Photoshop CS5 can write the proper things to the Apple OS so that the thumbnails are visible, that there's something Adobe could do to fix it.
    But EVEN IF this were something only Apple could fix, that Apple hasn't fixed it yet says pretty loudly that Adobe isn't making the right overtures to Apple for their mutual benefit.  Adobe, are your executives so greedy that they can't grease a few palms of their friends over at Apple to put some priority on this?  What's the problem here?  Has Adobe actually forgotten how to do business?
    -Noel
    P.S., You should know that I don't use a Mac and am personally having no issues with seeing proper thumbnails and previews on my Windows 7 and 8 systems, since the software that does that isn't from Adobe.

Maybe you are looking for