I can't see HDV in FCP5

Hi everyone,
I changed my Mini MAC with a PPC G5.
I installed FCP5, I captured the video in HDV 1080i with Sony-Z1 and when I play the video I can't see the video, I listen only the audio.
I tryed to open the video with quicktime (updated to last version) and I listen the audio but the image is White.
In my old Mac MINI (with the same program) It's all OK, I can see the video and listen the audio.
any person know which is the possible problem?
I read the other post with the same problem and I found't the solution...
I have a friend whit the same problem whit a power book G4...
thx
Dek

You did do a full proper install, and not just drag the application across?
There is a QT HDV component that needs to be installed to view HDV material. Without it, you get audio, but no video.

Similar Messages

Can't see HDV playback on external HDTV

I'm using my PowerBook 12" to edit an HDV project. My laptop is connected to my Sharp Aquos via a DVI-HMDI cable. My Video Playback is set to Digital Cinema Desktop Preview, and External Video is set to All Frames. When I place the playhead on a frame, the frame appears on the tv. But when I play the video, it stays stuck on that frame on the tv.
Is there a way to see it play on my tv? Or do I just need a better computer?
Thanks for your replies.

With HDV you cannot see a realtime preview on an external TV/Camera monitor. This is only for SD DV. The reason for this is because Final cut needs a realtime card to playback projects on external TVs, and these can only be put into desktops such as Powermacs/Macpros. A workaround- connect a standard XGA or above monitor, open frinal cut, drag your canvas window onto it, expand it to full screen, and away you go.

Can't see audio wave in viewer after FCP5 project updated into FCP2

After updating my project from old FCP 5 version running on Tiger to FCP2 running on Leopard, I can't see the audio wave picture inthe viewer window. Is there an explanation for this?
Thanks assistance.
Ray

You can try clearing the waveform cache in your project folder. Press Shift Q to open the System Preferences window. Look for the location that is set as your Waveform Cache location, then use the Finder to navigate to that folder. Remove the cache files from there, and then try relaunching your project to see if that solves your issue.

Can't use HDV quicktime .mov files (captured in FCP on a mac at work) on PC

Hiya everyone!
I've taken some work home from the macs at work, but can't open it on my PC.
Footage was captured in FCP on a mac at work, HDV quicktime .mov, but won't open in the newest quicktime, windows media player and more importantly in Adobe After Effects CS3 or Premiere Pro CS3 on my PC at home.
When I try opening the files in quicktime, the screen is white, but the audio plays. They don't open in windows media player at all. When I try to import them into Premiere, I get a message reading, "Error Message, Codec missing or unavailable". But they import into After Effects, except they only play as white...
I've tried converting them into almost everything, and they often play (as .avi for example in the newest QT, WMP, Adobe Premiere and AE), but they increase A LOT in size and decrease A LOT in quality.
The HDV files that won't open read as:
Source: *.mov
Format: HDV 1080i50, 1920 x 1080, Millions 16-bit Integer (Little Endian), 48.000 kHz
Movie FPS: 25.00
Playing FPS: (Available when playing)
Data Size: 69.53 MB
Data Rate: 28.10 mbits/sec
Current time: 00:00:01.64
Duration: 00:00:20.76
Normal size: 1920 x 1080
Current size: 1920 x 1080
Anything smaller than 1920 x 1080 plays fine.
I've been all through google, and the adobe and apple sites, and the best I could find is here:
http://discussions.apple.com/message.jspa?messageID=7753066#7753066
and
http://discussions.apple.com/thread.jspa?messageID=8159317&#8159317
My problem is almost identical to these 2...
No one in the whole world seems to have an answer...
Does anyone here know how I can use the HDV files from the work macs on my PC at home?
-Kaiwin

HEy, I have been looking into this problem... i also wanted to play quicktime files using my pc... The last thing i tried was downloadiing these codecs
1)apple pro res *for pc
2)mpeg 2 codec for pc
I have HDV files captured on a Mac G5 they are 30p 720,
I think i am close to solving the problem because: before installing the codecs i couldn't see the video and only audio.. but now i open it and i can see the video partially... here are my screen captures....
anyone interested in getting this solved???,... i would also like some help in importing m2t files from VLC player to HDV split where they can be read and edited. Thank you.
Ultimately my goal is to be able to edit these HDV files directly and export them back out with good quality.. because my only editing choice right now is Windows movie maker.
this is an error i got from the HDV split program. Its supposed to read m2t files..

How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.

First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

I am looking in this table with SQLPlus and TOAD and can not see any rows.

Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

Can not see historical data in Time Machine backup

Hi folks
First my setup:
   MBP Late2012
   Samsung Evo 840 SSD
   external USB 3.0 1TB as TimeMachine HD
   Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
      Stoiker

Hi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much.

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

My photos just became empty boxes, if I click on them they open, but I can't see them at a glance. Anyone know why? thanks

My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
Regards
TD

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

Can you see a image in the Get Info Window?

After upgrading to Mt LIon and while using CS6, I can't see image previews in the Get Info window. Can't see images in the upper left corner of the get info window, so I can't make a selection and then do a copy- paste like I could do before I upgraded to Mt Lion with CS6. I want to be able to paste a image of the subjects in my folders.. IE folder of Panda Bears would have a image of a Panda showing on that folder. Folder of The Great Wall would have a image of the Great Wall on the Folder of Great Wall pictures. This has always worked for the past many years I have used a Mac and Photoshop. I started with Photoshop 2. All my photo folders are represented by images so I have a good idea of what is contained in each folder. Now after 2 weeks in China, 20 folders are represented by 10-11-12, 10-12-12, 10-13-12, 10-14-12 and so on. Shows me nothing but dates. I have tried saving as Jpeg, Tiff, and PAD, and still can't do a copy-paste in the Get Info window. Apple says it is a Adobe problem, Yesterday Adobe told me it is because I am uusing a Nikon D800 and Adobe does not have a patcdh for the NEW Nikon camera. I then tried using my Nikon D2Xs, Nikon D3X, Nikon 800 and even my wife's D50 and none of these camera allow me to copy paste the thumbnail image to the clipoboard like I have been able to do for YEARS... I can see images in a folder in Bridge, but the images dont show in my desktop folders.IE, a folder on my desktop with 200 pictures only show with words/ numbers/letters NO IMAGES appear in the folders on the desktop. On some folders the folders in a folder don't show up as Folders either.
Can Any one help me. Same thing happens on my MACPRO w 16 GB Ram and on my 17" MacBook Pro.

Allan Sicks wrote:
Thanks for your input. Problem might be with the EASTER BUNNY..... have to have someone to blame.
I can't blame you for saying that.
Adobe is the clear owner of the responsibility to make functional their product that they claim is compatible with your operating system. Adobe is the one who sold you the product.
I just went looking for what Adobe has said about Mountain Lion compatibility, and they both list Mountain Lion as compatible and include such language as that on this page (emphasis mine):
Adobe and Apple have worked closely together to test Adobe® Creative Suite® 5, 5.5 and CS6 editions and individual products for reliability, performance and user experience when installed on Intel® based systems running Mac OS X Mountain Lion (v10.8). Earlier versions of Adobe Photoshop® (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues.
I suggest that Adobe needs to get on the ball and get this fixed. The time for user patience is over.
If someone from Adobe is saying "Adobe can't fix it" then that someone is at the wrong authority level and/or is thinking on the wrong level.
This is business and the business is making products that have value and are sold to people who perceive that value. Adobe doesn't get to keep selling products that don't work while standing on principles that "it's someone else's problem". Customers don't care why it doesn't work.
It's obvious to a child that if Photoshop CS5 can write the proper things to the Apple OS so that the thumbnails are visible, that there's something Adobe could do to fix it.
But EVEN IF this were something only Apple could fix, that Apple hasn't fixed it yet says pretty loudly that Adobe isn't making the right overtures to Apple for their mutual benefit. Adobe, are your executives so greedy that they can't grease a few palms of their friends over at Apple to put some priority on this? What's the problem here? Has Adobe actually forgotten how to do business?
-Noel
P.S., You should know that I don't use a Mac and am personally having no issues with seeing proper thumbnails and previews on my Windows 7 and 8 systems, since the software that does that isn't from Adobe.

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
Thanks in advance for your help!

With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

Can't see month view in iCloud calendar

When I click on the month view tab at the bottom of the iCloud calendar screen, nothing happens. For that matter, clicking on the day tab doesn't do anything either.
As another annoyance, in the week view I see the weeks events that were brought in from my Mac, but going to the next week shows no events. HELP!

I am having the same problem. It started when the month view was not available. It took me a long time to figure out that when I minimize the month view, it shows up on the dock as a teeny tiny icon. When I click it, nothing happens. When I go to Week View then my calendar shows up. NOW though, my week view has disappeared and now I'm only left with DAY view. The same exact thing happens in Week view. I have no window, nothing to "grab" that I can possibly see to get it back on my screen. BUT it will be a teeny tiny icon when it's minimized.
The only thing I can think of is that I'm a tech teacher using a projector and my laptop changes resolutions with different software programs. I have had iCal open when the resolution has had to change. The only thing I can think of is that somehow that did something to the window and I can't get it back.

I can't see HDV in FCP5

Similar Messages

Maybe you are looking for