I can't see my ASUS blue ray burner in my disk utility...HELP!

I recently bought the ASUS 6X blue ray burner which according to the box is "mac compatible" but I can not find any way to burn disks with it. It doesn't even appear in the disk utility part of my system preferences. I have Toats Titanium with the HD / BD plug in installed, but still have no way to use this drive...HELP!

[topic moved to iOS subforum]

Similar Messages

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

More on what Hunt talked about...
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
And a solution... to try even if you do not have the problems described above
Set your DVD output to a folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)

Toast 11 and ASUS Blue-Ray burner not working together!

Hey All,
I recently got an ASUS SBC-06D2X-U Blue-Ray burner and found out that little "Mac compatabile" label isn't correct. Had to get Toast 11. Now I have that and the disk spits out still when I try to burn. I don't know what to do at this point. Disks are 4x and burner is 6x, but that shouldn't matter.
Help please!

it has nothing to do with windows or mac..
Your bluray from Asus its COMBO, that model doesn´t record bluray,
ASUS SBC-06D2X-U its bluray combo (read-only blurays )
ASUS SBW-06D2X-U its blurays writer

Encore cannot see my Samsung Blue-ray burner

I have a PC, Win 7, with Encore CS6. It cannot see my burner. My computer does see it. Any ideas?

Many of us gave up on Encore burning disks several versions back. The workarounds provide more flexible and efficient burning. And in most cases, we want multiple disks, so our first step in Encore would be building to an image or folder anyway,.
ImgBurn is the favorite for windows; Toast for Mac.
In addition to that as a recommendation, few of us spend much energy troubleshooting such issues. The number one issue historically has been other programs taking control of the drive. Getting firmware up to date is probably second.

Encore CS4 refuses to see Blu-ray burner

Using Encore CS4, I had previously been able to burn HD video using my LG Blu-ray burner. Recently though i have been unable to build my projects and bun to Blu-ray. I get a "None Found" from the Recorder selection of the Build Project window even though the burner does display as an option when I select DVD as the recording format. I believe that one of two possibliites exist: 1. Some other software driver has broken my blu-ray driver and Encore can no longer see it, or 2. Some other software has captured the blu-ray burner device and Encore can no longer use it. I have already removed "Nero" because i have herad that it can cause Encore grief. Any suggestions would be appreciated.

Hi,
There were some issues with Encore CS4 for blu ray on windows 7.
Install latest pxhelp from -
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS=
This may resolve this problem.
Thanks,
Pankaj Gauba

I don't see a blu-ray icon in the destination window of my Final Cut Pro app even if I have an LG blu-ray burner connected

I have a MACBOOK PRO running under 10.9 and 4 Gigs memory. I bought FCP to be able to burn blu-rays videos (I produced a 4h30 video on a trip to Turkey)
My video is produced in full HD. I have an LG blu-ray burner. I bought training videos on FCP at Macpro Video and they show that going on SHARE and selecting ADD A NEW DESTINATION will bring a window where should be an icon of a blu-ray disc. But I don't see any blu-ray icon there. My burner is the model BP40NS20

Thanks Tom! Yes, I have the french version. Then, is there a something to do to correct it.

Can my macbook pro play blu-rays?

Can my macbook pro play blu-rays without any extra equiptment purchased?

Welcome to the Apple Support Communities
The built-in SuperDrive can read CDs and DVDs, but not Blu-Rays. You need an external Blu-Ray drive and a specific application to use Blu-Ray discs

Can superdrive record to a blu-ray disk? (iMac mid 2010 intel).

Can superdrive record to a blu-ray disk?

According to Roxio, you can; however, you will need an external bluray burner.
http://www.lacie.com/products/product.htm?id=10596
This product says that it has the software needed (Toast with the bluray plugin).

How can i use my LAN Blu-ray player and tv to view screens on my macbookpro

how can i use my LAN Blu-ray player and tv to view screens on my macbookpro

in short - no.

Blu-ray Burner

Hi Master,
I just change my laptop from Dell to MBP Retina.
Previously i had store all my photo data using ASUS USB 3.0 12X Blu-ray Burner Model BW-12D1S-U. When i plug in the device into my Macbook pro, i cannot founded the blue ray device. I need to copy all the picture which i have previous and put into my macbook.Now problme the device cannot function.
Hope any one able to help to solve this problem
Thank you
From,
CW Chan

Hi
Thanks for help.
Follow your instuctuin, i saw copy info as below.
Can help to validate that the device is detected by MBPR?
But i cannot see the device in FINDER>DEVICE.
USB 3.0 SuperSpeed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBXHCI
PCI Device ID:          0x1e31
PCI Revision ID:          0x0004
PCI Vendor ID:          0x8086
Bus Number:          0x14
External:
Product ID:          0x5106
Vendor ID:          0x174c (ASMedia Technology Inc.)
Version:           1.00
Serial Number:          0123456789ABCDEF0124
Speed:          Up to 5 Gb/sec
Manufacturer:          ASUSTek
Location ID:          0x14900000 / 7
Current Available (mA):          900
Current Required (mA):          0
Hope can help
thanks

DVD & Blu Ray Burner Drive Trays Do Not Stay Open When Media is in the Drive

I have a problem with both Windows 8/8.1 and the Windows 10 Technical Preview (there is no issue when I run Windows 7).
I have 2 optical drives: 1) DVD Burner and 2) Blu Ray Burner (I just got the second drive a few weeks ago). They are attached to the secondary SATA Chip (see below for specifics).
The problem I'm having is that when I eject media from either drive, the drive does not stay open, but rather immediately closes. Before I got the Blu Ray Burner, I had this problem with just the single DVD Burner by itself. I was hoping when I installed
Windows 10 Technical Preview that this problem would not be present, but it is present in that O/S as well.
This problem will repeat continuously if I attempt to use the eject button and so I either have to grab the disc while the tray is moving, or if I press the eject button again on the drive at the right time, I can get it to re-open and not close (this
is tricky to get the button timing right as it seems like it has to be done close to when the drive tray is fully extended when it starts retracting). It usually takes me 5 to 10 button presses to get it to stay open. Sometimes it will stay open for about
0.5 to 1s before it closes again, but most of the times it just immediately closes. I also have the same problem if I use the software eject feature by right clicking on the drive and choosing eject.
Of course, the expected behavior is that pressing the eject button should open the tray, but not close it immediately allowing you to remove the disc.
Here is some background information about my system and how the drives are connected:
1. Motherboard: Gigabyte GA-EP45-ED3P Revision 1.0 LGA 775
2. Interface (for both drives): Gigabyte SATA II Chip - 2 x SATA 3 GB/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3 GB/s devices
3. Memory: 8 GB (4 x 2 GB)
It should be noted that I tri-boot between Windows 7, 8/8.1, and 10 Technical Preview and that this issue is not present in Windows 7, but has always been there in Windows 8/8.1 and now it is present in 10TP as well.
I've had this system for just over 6 years now and it is still going strong. It should be noted that I have both drives on the secondary SATA chip (as identified above), which is meant to be used with removable SATA devices.
Since the problem exhibits itself in both Windows 8/8.1 and 10TP, a reinstall of the O/S will have no affect on this problem and so this appears to be some other issue that is consistent between Windows 8/8.1 and 10TP.
I'd appreciate your support in looking at this issue - thanks!
Matt Caspermeyer
P.S. I also submitted this feedback through the Insider Program.
Matt

Hey Zagayer,
Thanks for using Apple Support Communities.
As you now have two optical drives in your Mac Pro, you need to be able to choose which drive to eject. That is built into the system. You just hold the Option key while tapping eject for the 2nd drive.
OS X Mountain Lion: Eject a disk
http://support.apple.com/kb/PH10613
If your computer has two optical drives, hold down Option-Media Eject or Option-F12 to eject a disc from the second drive.
Have a nice day,
Mario

Blu Ray burn problem

I'm trying to burn a blu-ray disk from a 5 minute FCP X video. Each time I try I get the following message:
The bit rate of the video file exceeded the maximum allowable.
How can I work around this?

robertjeffrey
What Blu-ray burner do you have? Is it recognized in the Device Manager under DVD/CD-ROM drives? Driver and Firmware up to date?
What burn software came with the Blu-ray burner? If it is part of the CyberLink family, can you use the PowerProducer of the series to burn to Blu-ray disc format on a Blu-ray disc using these Blu-ray discs that Premiere Elements burn dialog is labelling "Media Not Present"? I would like to see the results of that test if possible.
Just to get it out of the way (maybe helpful), let us flush the preferences...
Assuming your Premiere Elements 11 is on Windows 7 or 8 64 bit....
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11
and in the 11 Folder is the Adobe Premiere Elements Prefs Folder that you delete. If that does not work, then delete the whole 11 Folder in which it exists.Make sure that you are working with Folder Options/Show Hidden Files, Folders, and Drives active so that you can see the path described.
If that does not work, a complete Deactivation from Help Menu/Deactivate followed by the usual Control Panel uninstalled followed by reinstall may be in order. I am hoping the results from a CyberLink PowerProducer burn to may give us some valuable information so that we do not have to resort to uninstall/reinstall.
Are you using BD-R 25 GB 2X? What is this BD-R DL? Is that the 50 GB for Blu-ray? Do you have any BD-RE 25 GB 6X? How much are you planning on putting on this Blu-ray disc in terms of Space Required and duration?
Let us start here and then we can decide what next.
Thanks.
ATR

How do I stop my Blu-Ray burner from "sleeping" or going offline?

I recently installed a PIONEER BD-RW BDR-206 Blu-Ray burner in my Mac Pro. After about an hour or so it apparently goes to sleep or does something where the computer does not recognize it anymore. And I can't do anything to bring it back other than restart the computer.
This poses a significant problem when I use Compressor to burn Blu-Ray discs because Compressor might take 10 hours to process, then when it's done I lose everything because it can't burn the disc because the computer doesn't see the blu-ray burner anymore.
The only way I've found to get around this is to eject and then close the burner every hour or so. That's a good band aid, but not acceptable. Especially when I set to burn overnight or I leave the office for the day.
I've gone through System Settings and do not see anything pertaining to this, but I'd be happy to admit if I've overlooked something to fix this issue!
Please offer any feedback,
Thank you.
Eric P

Thanks Dennis. I believe I did try that option to no avail. After talking with the techs where I got it (MacSales or MacWorld... don't remember off hand now) they said that that particular burner was known for this issue with Macs. They work with Macs, but they have that problem of going offline even if all computer settings say to stay active. I ultimately purchased a different brand burner and now it works no problem.
I also bought a casing for the old Pioneer so that I could still use it.
Thanks,
Eric

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

I have burned to my external blu ray burner 3 times, but twice ended up with glitches in the project. now it stops at 59% and won't finish sharing. How do I get it to finish sharing?

It's a complex project and there are a lot of possibilities. Among them is the length; there are a number of reports of projects that are approaching 2 hours failing to burn.
If it's a question of jarring Create Disk into action, one thing that has worked for some users is simply to click on and the Apply button (s) in the Settings pane of the Blu Ray Share window and then hitting Cancel. This can be tested by duplicating your project and selecting a tiny section of your sequence and exporting. Change the Output Device to Hard Drive and see whether Create Disk successfully writes a disk image.
You can also check that a specific clip isn't rendering properly. Since the process got to 59%, it may just mean that the burn couldn't be initiated by Create Disk – or it may indicate a problem with a clip toward end of your sequence. (If you can check the log, there may be something useful in there.)
Use the duplicated project and this time set a range for the last 30 minutes or so of the project and export it, using the Blu Ray destination. Again, set Output Device to HD and see whether it will complete.
Good luck.
Russ

Change the Blu-Ray burn speed from within PRE9

I burned a 2 hour video to Blu-Ray last night from within PRE9, and it all turned out well. Except it took maybe 5 or 6 hours to burn (its 6x speed disc).
Is this to be expected? I don't see any settings for burning speed from within PRE9.
I burned a 2 hour test Blu-Ray the other day from within the software that the Blu-Ray burner came with (where you can adjust the burn speed), and I could swear it was much faster. But I don't want to waste another disc just to test this out.
Thanks
Greg

Unfortunately, PrE does not allow one to alter the Burn Speed. The "big brother," Encore has that capability.
In PrE, I suggest doing a Burn to Folder, and then the great, free burning utility, ImgBurn, which allows that adjustment. However, without extra software (virtual BD burner software), PrE does not allow BD Burn to Folder, at least not yet.
Sorry for the bad news,
Hunt

I can't see my ASUS blue ray burner in my disk utility...HELP!

Similar Messages

Maybe you are looking for