I can't see my network Printers when i installed Time Capsule

I'm hoping someone can help me with this. I had a wireless network using my NetGear router so i can share internet and two network printers. The network printers are connected to the router using ethernet wires. Now that i installed Time Capsule i can't get the Network Printer to print.

I did what you said, made sure that both network printers where turned on connected to TC and ready to print, then i opened my system Preference, Print & Fax, i removed my two printers that where there before and working, then hit the plus sign, add printer, here's what's different, my MacBook Pro, under AppleTalk and one of my printers can up and it now works but the other didn't. So on my iMac i tried the same thing but no printer showed up under AppleTalk, i did find the two printers under "Default" and Bonjour was under "kind" i said install to both and it did. I just tried printing to both printers and now i have two bouncing printer icons on my doc with a massage " Attempting to connect to host 192.168.1.10" for one of the printers and the second "Attempting to connect to host XRX92CABD.local." i'm starting to think that i didn't set up the TC correctly or i have some option in TC setup wrong.

Similar Messages

How can I see how much data passes through my Time Capsule?

I am thinking of using a cellular data plan at home. My current, rural internet provider is slow and unreliable. I use a MiFi as a backup and have 4G service which is much faster and rarely goes down. I need to see how much data is downloaded and uploaded to compare costs. All our data passes through my Time Capsule.

A similar app to what Bob mentions is peakhour.. it works on any of the newer OS.
https://itunes.apple.com/au/app/peakhour/id468946727?mt=12
It is a good app. BUT.. fat ugly BUTT.. just the same as Bob has explained, it depends on SNMP to work.. and so due to apple removing a very useful and functional protocol from its airport range you can no longer use it. Bizarre.
I strongly recommend a Netgear WNDR3800 (older model now but you can pick up one cheaply on ebay) and a 3rd party firmware called gargoyle. Apple delete my posts if I point you to it, so you will have to search yourself.
Replace your tall TC with the Netgear as the main router.. bridge the TC to it and you can continue to use its wireless and for TM backups. The advantage is that gargoyle will not only measure everyones usage, by IP, it is able to set a quota on everyone using the net and you can set that quota for hourly, daily or weekly or monthly. It will track the usage and you can see at a glance what everyone has used.
It is simple to load.. just like a standard firmware update. The interface is as clear as anyone can make it with such of lot of tools. And the actual router is powerful enough to provide excellent QoS and parental controls on top of measurements and quota.

Can't share internet connection with iPad since installing Time Capsule

Until today, I've used Earthlink's DSL service with a Netopia DSL modem with an ethernet connection to my iMac through a Linksys WRT54G router. My iPads (1 & 2) have been able to simultaneously share the internet connection over wifi.
Today, I installed a Time Capsule and removed the old Linksys router. I'm still using Earthlink's DSL service with the same Netopia DSL modem, and I still have an ethernet connection to my iMac, but through the Time Capsule now. I can get online from the iMac without problems.
But my iPad can no longer connect as they did previously. When I try to visit a website using Safari on the iPad, I get the message, "The Internet connection s currently in use by another computer. Enter your DSL Account logon password to switch the Internet connection to this computer." If I enter the DSL account password on the iPad, I can get online, but then the iMac is knocked offline.
How can I go back to sharing the connection so that any of the devices can get online at the same time?

I found another thread right after I posted and seem to have solved the problem following the steps described there (plus a couple more).
https://discussions.apple.com/message/15758093#15758093

How can i see photos with apple tv from my time capsule files?

I have photos in my time capsule and i want to display them on my apple tv without a computer. Some sort of browsing in my time capsule from apple tv. Both are in the same wifi net, which uses time capsule as basis,

Unfortunately, you cannot do that. In order to share photos with your Apple TV, you need to select them through the advanced menu of iTunes on your computer.

My ipad is not allowing me to join thenetwork. i can see the network but when i try to click it, it will not allow me to join. pls help

my ipad is not allowing me to join thenetwork. i can see the network but when i try to click it, it will not allow me to join. pls help

The next iOS update won't change this.
Are you able to transfer anything else from your iTunes library and computer via the iTunes sync process such as a movie, TV show, podcast, audio or print book, apps, and photos from your computer?
What is selected under the Music tab for your iPhone sync preferences with iTunes.

I have my printer email address, but I can not see my printer listed when I login to hpeprint.com

I have my printer email address, but I can not see my printer listed when I login to hpeprint.com

I will need some more information in order to assist. What model of printer do you have? Different printers have different features such as the ability to display the printer's ePrint address on the front panel of the printer. The website that the printer can be viewed at is eprintcenter.com. Click on this link here to see the sign in page. Have you signed up and register the printer at this site? Is the email address for the printer one that you have customized? Or is one consisting of what appears to be random letters and numbers?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Can't see a network (Netgear router) I know exists

I've in the process of relocating and am in temporary accomodation without broadband, but have been lucky enough to get to know my neighbour who is running a wireless network next door on a Netgear router (not sure which model) and has offerred to let me connect via that.
However, now that I'm home and trying to do so I can't see the network. I'd guess that the router is only about 50 feet away through a couple of walls, so I wouldn't have thought that would be a problem. There is also supposed to be another wireless network running in the building, but I can not see that one either.
Before I moved I used a Netgear DG834G wireless router myself with my Airport Extreme-enabled Pwerbook, and I can't remember having trouble seeing the netwrok when setting that up (though it was a couple of years ago so memory may be fuzzy).
Does anyone know how I can scan for non-Airport Base Station networks?
Or do I just need to go back to my neighbour and get the IP Address to configure manually?

If your neighbor's wireless router isn't visible to your Mac, getting and IP address and configuring manually won't get you connected. Two things I suggest you do:
1. verify with your neighbor that his router is not configured with "SSID broadcast disabled", thus rendering his router invisible
2. see if your Powerbook gets a signal when located in your neighbor's apartment. Fifty feet and a couple of wall could indeed be beyond usable range.

IPhone Can not see home network

Ok, I have read a lot of strings about Wii issues and I have tried the following:
- Unplugged (rebooted) my cable modem
- Unplugged (rebooted) my Airport Extreme
- Rebooted my iPhone multiple times
- Turned on and off the Airplane Mode to re-search for WiFi connections.
- Searched manually for the connection (typing in name and password)
- Turned off the WAP/WAP2 Personal security
but nothing seems to work. I can not view my home network on my WiFi.
I can see all my neighbors networks and the phone works great on free networks around town but my home network will not show up.
My home network does work on my laptop though.
Any thoughts?

Nathan:
Great suggestion. I changed it to 802.11 n (with b/c compatability) and I can now see the network on my iphone and I can log in (I think).
I chose the network from the list and put in the password. The first couple of times it did not take but the 3rd or 4th time it seemed to log on. If I go to Settings and look in the Wi-Fi area it has my network name as the network it is logged into but...
There is no WiFi symbol on the top bar of the phone (only an E, for the Edge network) and when I chose any application (Safari, YouTube, etc.) it only accesses through the Edge network.
Any other thoughts?

Can't see Mac network with JFileChooser

Greetings
I am using a standard JFileChooser to select files and directories in my application running on MacOSX Snow Leopard. My problem is that I can't see my network using JFileChooser. I can see all the other Macs on my network using Finder or a standard Mac file browser but not on JFileChooser. I suspect I am missing something really simple but at the moment I am at a loss.
Any suggestions would be most appreciated.
Regards
Doug Bath

Hi,
I also have the same problem.
My belkin wirelss router is set to channel 13, therefore my macbook cannot see this network when it search's, for the above reasons.
However unlike the situation above I am unable to change from channel 13 as we have discovered in the past that this is the only channel that is not in use by other networks around our area. The rest gave us interferance troubles.
I have a number of windows laptops in the house and there is a setting that you can change so the laptop will search for channel 13. I was wondering if anyone is aware of a setting on the macbook that will make the airport card search for 1 - 13 not just channels 1 - 10 as it is now.
I thought I would add this question to this topic as it is very similar. I hope I was correct in doing so.
Thanks,
Josh
Macbook Mac OS X (10.4.8)

E4200 Can't see my network shares after upgrade

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
I did downgraded the firmware back to .01 but still no network .
Any help ?

After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status…

IPhone 4S - iOS 6 - can't see WiFi networks

I have a strange problem with my iPhone. It's a locked iPhone, bought from Vodafone from my country. I use it locked and un-jailbreaked. I went in France for 2 weeks where i had my Roaming active, but i didn't used cellular data, only WiFi. Now, back home in my country, it seems that i can't see wireless networks. I tried to reinstall, update to the last firmware, it seems that wireless appear for 1 second when at first start, then it disappears and i can't see no more WiFi networks in list, tho there are like 10 networks around me.
Any ideas? Or someone else had the same issue?
Thanks,
Nick

i went to Vodafone. They said they will replace it. It seems like a manufacturing defect.

Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes? I find it frustrating that I see only one at a time now ! Any suggestions please?

Where can I see the downloads LIST when downloading podcasts,
like in the older version of iTunes? I find it frustrating that I see only one
download at a time now ! Any suggestions please?

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

How can I see all photo miniatures when I open a photo album or an event in iphoto?

How can I see all photo miniatures when I open a photo album or an event in iphoto?

Note the zoom slider at the bottom of th iPhoto Window - drag it left.

Hallo. My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help? Thanks

Hallo.
My computer can't see my iPhone 4 when I open iTunes. iPhoto sees my iPhone as a device, but can't see its photos, although it recognizes how many photos there are. Some help?
Thanks

Did you also read that same link you provided and see this "With iTunes 10.3 or later and iOS 4.3.3 or later, "?
Iphone 3G does not support ios 4.3

I can't see PDFs in email when using iPad

I can't see PDFs in email when using iPad

Can you be a little more specific in describing the issue?

I can't see my network Printers when i installed Time Capsule

Similar Messages

Maybe you are looking for