I can't see my pictures in my Photos.

I take photos and when I go to the Camara Roll album and scroll through the picture I take I can see them but when I click on a recent picture to show a friend it just shows up white. If I click edit the picture shows but when I get out of that it's white again. This has been happening with recent pictures I've taken.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar                                      

Similar Messages

  • I can not see the pictures in the photo pane

    I'm trying to see my pictures in the photo pane (the media section in iMovie) but I can not see them. I know that I have to have iPhoto 4 or later. I have iPhoto 6 but I can't still see the photos. Can you help me?????

    If deleting the pref files didn't help, then it's likely a problem in the iPhoto albumdata.xml file. This is the file that other apps must read to access your library. It usually goes bad due to a problem keyword in your library. Look for non-ascii characters in your keyword list. One user had an empty keyword that caused this problem.
    See Dave E.'s instructions on how to read the xml file to locate the problem keyword. If you find one, go into iPhoto's preferences to either edit or delete the problem keyword. http://discussions.apple.com/thread.jspa?messageID=3870956&#3870956

  • How can I transfer photo from my iPhone 4S to my pc . Each time I connected to my pc I can not see those pictures let alone burn them into cd

    How can I transfer photo from my iPhone 4S to my pc? . Each time I connected to my pc I can not see those pictures let alone burn them into cd

    importing pics http://support.apple.com/kb/HT4083

  • How can I see my pictures in iCloud

    how can I see my pictures in iCloud
    I see them in my phone, but is there a way on seing them in my desk computer, accesing iCloud?

    You cannot view Photo Stream photos on iCloud.com.
    To view Photo Stream photos on your desktop you need a Mac running OS X 10.7.5 or later or a PC (via iCloud Control Panel) running Windows Vista or later.
    Mac: System Preferences > iCloud > Sign In > enable Photos
    PC: Install iCloud Control Panel > Sign In > enable Photos
    iCloud Control Panel 2.1.3 for Windows Vista
    iCloud Control Panel 3.1 for Windows 7 or later

  • My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!

    My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!

    When you email from iPhoto, you have a choice as to the size of the picture - choose medium and your friends will be able to see them.  By the way, do your friends click on the photo attachment  in the mail to open it?

  • How can I see thumbnail pictures for Videos like I can see for Jpegs

    How can I see thumbnail pictures for videos like I can see for Jpegs in Elements organizer.
    Thanks
    BillJa

    You should get the mobile version of YouTube which sends Firefox a notice to open it in the YouTube App. That will have a much better playback experience than running Flash in the browser.

  • Can't See My Pictures--Just Empty Boxes

    I just did a download of new pics from my camera to iPhoto. Somehow during the download I can't see my pictures in my library or in my albums. Just empty boxes show up. The count of the number of pics is accurate for both the albums and the library.
    I restarted my computer, and rebooted with no luck.
    I did a reboot holding down the "apple" and the "alt" key, and followed instructions, and still no pictures.
    Any ideas of what I can do?
    Danny
    [email protected]

    Danny:
    Welcome to the Apple Discussions. What do you see in the library, empty thumbnail spaces or empty edit windows? Is it all the photos or just some? Check in the Originals folder to make sure you have the full sized image files in the subfolders. They should all be there. Also do you have folder in the iPhoto Library folder titled "Recent Imports" or something like that?
    Do you have a backup copy of the iPhoto Library folder or the iPhoto library database file, Library6.iPhoto?
    If not and since you've tried rebuilding the library with no success you're going to have to start with a new library and import the image files from the Originals folder of the current library. Here's how:
    Creating a new library while preserving the rolls from the original.
    Move the existing library folder to the desktop.
    Launch iPhoto and, when asked, select the option to create a new library.
    Drag the Originals folder from the desktop into the open iPhoto window.
    This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
    Once this is completed you can delete the Originals folder from the desktop and the iPhoto Llibrary folder. If desired, you can keep the older library folder to try other fixes on it.
    In the future I recommend you make a backup copy of the Library6.iPhoto file after each import and after doing a lot of editing and organizing in the library. Then if you experience a similar crash all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup. See the tip at the end of my signature.
    If you have a recent backup copy of the library post back and we can go from there.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • When i open my iphoto i can't see my pictures just boxes with nothing in it...help?

    When i open my iphoto i can't see any pictures, just boxes outlinine where the pictures used to be.  What happend to the pictures?

    Something happened - with zero information no one can even guess what happened
    What version of iPhoto? What version of the OS? what recently changed?
    LN

  • When I touch photos the heading albums is covering "camera roll" so I can't see my pictures.  What do I do?

    When I touch "photos" the heading "Albums" is covering 'camera roll' and I can't see my pictures.  What do I do to  fix this?

    Hi Susan. Try a reset: Push and hold the Sleep/On/Off button and the Home button at the same time for approximately 10-15 seconds, until the Apple logo reappears. Release buttons.
    Stedman

  • Suddenly I can´t open Elements Organizer (edition 9) and I can´t see my pictures. What to do?

    Suddenly I can´t open Elements Organizer (edition 9) and I can´t see my pictures. What to do?

    I start it from the PSE-icon on my desk or from "Programs"

  • When I connect my iPad to my new Mac Pro, I can't see my pictures

    When I connect my iPad to my new Mac Pro, I can't see my pictures on iPhoto in Mac Pro under devices.I want to import my photos from iPad to Mac Book. Can you please help me?
    Thanks and regards,

    Oops ... You are correct. I misread your question. My sincere apologies. You want to import the photos from the iPad into iPhoto - not the other way around.
    Connect the iPad to the Mac with the cable and launch iPhoto. Your iPad should appears under the devices heading in iPhoto - in the left sidebar - just like it does in iTunes. Click on the iPad name. Then you can import the photos.

  • I can't see my pictures from my mac 10.9.4

    i try to see my picture library and i can't see no pictures what can o do

    See options here to rebuild.
    iPhoto 6 and later: Rebuilding the iPhoto library
    http://support.apple.com/kb/ht2638

  • Can't see my pictures

    I can't see me pictures in the preview.I see only one and the same picture in all my happenings.When I klick on it I can see the pictures I was looking for, but it isn't easy to look for a photo if you see all the same pictures or just black picture.It started after an update, and new updates did not solve my problem. Does anybody know what I can do,so I can look for my pictures just by passing by.

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
    Regards
    TD

  • How can I see which pictures have been backed up

    How can I see which pictures have been backed up

    All the pictures in your camera roll will be backed up in iTunes or iCloud (depending on whether you have iCloud backup enabled on your iPhone) every time a backup is performed. The other photos stored on your iPhone (i.e. the ones you didn't shoot using the iPhone itself) will NOT be backed up.
    Nevertheless, it can't hurt to import them into iPhoto or Aperture (or whatever you're using) as roaminggnome suggested.

  • I have a new i phone6 and cant watch the photos i had in my old iphone 4- i can see in the i cloud a line showing last backup of my old i phone 4 but can't see the pictures i have there - tnx for the support

    I have a new i phone6 and cant watch the photos i had in my old iphone 4- i can see in the i cloud a line showing last backup of my old i phone 4 but can't see the pictures i have there - tnx for the support

    Yes.
    Just call your provider and tell them what you want and they will help you get it done properly.

Maybe you are looking for

  • Error when doing a search in the Account Dim

    I get this error sometimes: "The member exists in NEXT...Do you want to expand?" It only happens in the Account dimension and when the view is ID and Description. Any Ideas? Thx.

  • BRFplus and creation of info record and source list

    Hi there. I would like to use BRFplus to fill out MM values and after that automaticly create info record and source list for this MM record. The first step is ok, but creating IR and Sourcelist I am not sure. What is the best way to do so? -> Callin

  • Row currency has changed since the user interface was rendered.

    Hi All, we have developed and deployed an Application in Production, before four months, Suddenly for the past two days we are getting an error after the page being idle for 2- 3 minutes. Row currency has changed since the user interface was rendered

  • To get cash discount for my payment term

    Hi there, To get cash discount for my payment term, I make configuration as below *Step 1: Create a payment term in Maintain of Payment term              On immediate payment 5 % cash discount *Step 2: -  Define acount for Cash discount taken        

  • Call a function module from CRM 5.0 via ITS to FICA

    Hi I want to call a function module in FICA (FICA is using sapgui) from CRM (IC-web) via ITS (Not integrated in FICA) Is it possible and how should this be done??? If someone know how, please help BR//JL