I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Similar Messages

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

Sales order not reflecting in the stock reqmt list

we have a MTO scenario.after the sales order is created we are not able to see the sales order in the stock requirement list.kindly please help.

Hi
following are the reason
1) Check requirement type in sale order and strategy group in material master.
2)if reason for rejection is activated in sales order.
3) cancel the sale order
4) schedule line category should be CP in sales order
Edited by: surendra patil on Dec 29, 2008 7:30 AM
Edited by: surendra patil on Dec 29, 2008 7:33 AM

Can't see any orders in Mobile Device

Hi all,
As described in topic "How to deploy MAM 2.5 into MI Server", I have just installed MI and deployed MAM 2.5 into an WebAS 6.40 SP13.
I have also, with the help of the functional guys from my team, followed through the Server Side Configuration part of the MAM Config Guide and created the scenario. I have assigned my MAM user (same userID of the backend) to the scenario and I'm now trying to see the orders of that scenario in the mobile device.
The problem is that I can synchronize the device but I can't see anything in the MAM besides de User View Manager.
I executed MEREP_MON and for my mobile ID I can see 1 I-Waiting for each SyncBO, 5 I-Error for SyncBOs MAM25_001 and MAM25_010 (but by the times of the logs, it seems that they are quite old already) and 5 I-Finished for all the other SyncBOs. Also, there are 5 0-Sent for each SyncBO but for MAM25_017, that has 19 0-Sent. All the other fields are 0.
What does the I-Waiting and I-Finished and so on mean? How can I make my user to see his orders?
Thanks,
Daniel

Hi Daniel!
I understand that the result you see in the Worklist monitor doesn't help.Did you try the recommendation in the FAQ.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/mi/mobile application faq/mam client faq.faq#q-4
If it doesnot help, try the following
(1)In the SPRO under MAM Customizing settings, go in to
"Assign Orders and Stocks to a Technician" and then double click the "Assignment Profile(Assigned to your MAM User ID in User dependant data)" and change the Order Assignment & Notification Assignment to "User-->Employee Number", if it is assigned to a Work Center OR a Planner Group.You can reset this back to the original settings later if required.
(2)Replicate the MAM25_090 & MAM25_095 via transaction MEREP_EX_REPLIC in the middleware.
(3) Synchronize the data from your MI Client
(4) If no data exists Monitor your Worklist as you did earlier.
Let me know.
Thx
Gisk
Message was edited by: Gisk

How to consider the Purchase Orders in Long Term Planning

Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PM

Dear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS

ISA contact can not see the Order made on oneSoldto and can check for other

Hi All,
i've one peculiar prob...in which assume X is the ISA contact person for two sold to parties Y and Z.where as the role is the same for X he cd able to check the orders he created for Y and cd not able to see the same for Z.please let me know how peculiar is the prob and what cd be the reason for this.
Thanx in advance,
Sarath

Hi Sarath,
How is the contact person X entering the webshop? I mean before entering the webshop the list of customers Y & Z for X will be displayed for selection. If contact person selects Y then he only be able to see Y orders and not of Z. This is a very much standard process in ISA. If you want to show both Y & Z orders then you need to modify the ISA functionality. Or in CRM5.0 ISA you can achieve somewhat similar functionality by using customer hierarchy functionality.
Reward if helps,
Regards,
Paul Kondaveeti

Why one user can not see plan output for some orgs while other users can?

We have several inventory/planning orgs. Suddenly one of the users is not seeing any plan output for some organizations. While other users are able to see plan out (planner workbench) for all org.
All users use the same responsibility.
Deleted all the folders to eliminate hidden query in default folder.
Any other thoughts?
Edited by: 918894 on May 5, 2013 10:22 PM

The issue is resolved.
In the user preferences, one user has Inventory Category Set and other user has Planning Category Set as the default. Items belonging to one Org were not assigned Planning Category Set. Thus they were not showing for the other user.
Thanks for the response.

Can't see Planning Application

I am new to Hyperion Planning, but I was able to successfully install and configure each of the components listed below. When I launch workspace and click on navigate, I do not see a Planning App. When I look in Administrative Services, I only see the sample apps. Am I doing something wrong, or should have the planning install created an application.
1. Shared Services
2. Analytic Services Client
3. Analytic Services Server
4. Analytic Administration Services
5. Analytic Integration Services
6. Analytic High Availability Services
7. Planning
8. Smartview
9. BI+ Services
10. BI+ UI Services
11. BI+ Client

Went thru the application creation and got a message in the end that said there was an error check the log file.
below is the logfile:
[Wed May 21 15:04:03 2008]Local/plan1isc///Info(1002035)
Starting Analytic Services Server - Application [plan1isc]
[Wed May 21 15:04:03 2008]Local/plan1isc///Info(1200478)
Can not load JVM from location in essbase.cfg [JvmModuleLocation not set], OS status [0]. Will try to load from library path.
[Wed May 21 15:04:03 2008]Local/plan1isc///Info(1200479)
JVM load failed, info [jvm.dll], OS status [126]
[Wed May 21 15:04:03 2008]Local/plan1isc///Warning(1200477)
Can not load JVM. CDF functionality disabled.
[Wed May 21 15:04:04 2008]Local/plan1isc///Info(1013202)
Waiting for Login Requests
[Wed May 21 15:05:09 2008]Local/plan1isc///Info(1013205)
Received Command [List Databases]
[Wed May 21 15:05:09 2008]Local/plan1isc///Info(1013205)
Received Command [SetApplicationState]
[Wed May 21 15:05:09 2008]Local/plan1isc///Info(1019010)
Writing Application Definition For [plan1isc]
I can see the application in the administration services console and can start it, but if I go back to the creation wizard I cannot see the application in the list of applications.
Any suggestions

I can't see production order in COCM.

Hello Guru:
I created a change Number and changed BOM use this change number .But I just saw the chang number in COCM. I didn't see the production order in COCM. Would you like to give me some suggestion. thank you very much .

Liang,
There could be many reasons for this. You should review all your configuration settings and master data. You can refer to this document which documents the steps:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0002c1c-f07c-2c10-3c93-b053715529b4?QuickLink=index&…
In particular, I would check the release key configuration (Release to OCM check) and the assignment of overall change profile to the material master.
Also, check if you have used the correct release key in the Engineering Change Master that you are using to effect the BOM change.
Anoop

How can I see planned values for services in PS reports?

Hi experts.
We are implementing PS for a mining company; in our process, project designers plan materials and services in networks and then get planned values for budget requests.
The problem I am facing is that I cannot see the planned values from services in the plan values reports. No value is exhibited for version 0 if I plan only services in a network. For materials planning I can visualize planned values normally. The network is not released. On example of planning values report that I am using is s_alr_87013533.
Does anyone know how to correct this problem with PS configuration?
Any help is welcome. Thanks!
Rafael

for planning services I am assuming that you are using service activity
check if determine plan cost is set up in the network header
secondly make sure that the plan costing variant is set up with the valuation variant to define where to get the plan values from

Iphone 4 when syncing with Itunes there are 3 Apps i wish to delete from list in which are no longer on my Iphone. I can't see how to delete these 3 Apps from the list .

How do I remove Apps from a sync in Itunes

You want the apps deleted from your iTunes library?
If you don't have Install selected for an app in your iTunes library, it won't be installed on your iPhone.
If you want the apps deleted from your iTunes library, select Apps under Library in the iTunes source list. Locate the apps you want to delete, select the apps there followed by deleting the apps.

Can not See All of my Music Library on the play list

I accidently moved my music library (My documents/My music/my itunes...)
When I moved it back, iTunes does not see all the song (over 2000). It only see the purchased music. I can use the Add to Library function (In the File menu) and add each song, song by song and I have added a few dozen songs back to the play list. So all the music is there, in the directory, Just can not get iTunes to recogize them.
ANY suggestions to adding the whole library back at once.
Thanks
Dell 4400 Windows XP

Do you at least have the little ! (exclamation point) next to the "missing" songs?
I just had the same thing happen to me, but mine occurred simply by upgrading to the latest version of iTunes... in the process it "lost" about half of my music.
I simply unchecked "Keep iTunes Music folder organized" under prefrences/advanced tab.. hit "OK", then went back in and re-checked it, hit OK and iTunes began "organizing" my library and miraculously iTunes found all of the missing music.
There are some decent articles about moving your iTunes library on the support site. They don't always work as advertised, but you're pretty much stuck with My Documents/My Music/iTunes on Windows.
You may be able to reverse things by following those instructions as well.

ITunes U course published but I can't see my school in the Primary and Secondary Schools list

I don't know how to contact the responsable of the iTunes U administration to send an email and change the name of my school.
I want to change Villaviciosa De Odón - Colegio Pax-Casvi into "Eurocolegio Casvi". Anyway, even my organization has been approved for courses publishing, I can't find the name of my school at the list of iTunes U "Primary and Secondary" schools.
If I go to https://itunesu.itunes.apple.com/audit/633264363, the course is in the iTunes U.

you might want to check on this possibility:
No music shows up in iTunes after upgrading

Long-term planning: planning details of work center capacity

Hi,
we need to know what is the effect on planned production orders (generated by MPS, transaction MD40) of the flag “long-term planning” in planning details of work center capacity (table name: RC68K; field name: KAPLPL). We made a test analyzing planned orders scheduling details in Stock requirements list (MD04) and in the Planning table (CM21) in both cases: with "long-term planning" flag set and without this flag for the same work center.
The schedule of planned production order on that work center is the same in the two instance.
Could you suggest us something?
Thank you.

Hi Rudy,
Purpose for carrying out Long Term Planning to simulate impact of Future Demand Program on
u2022 Material Requirements
u2022 Capacity Requirements
u2022 Material Cost budgeting (activity by Accounts dept.)
T.Codes used -
u2022 Demand MD61, MD62, MD63
u2022 Scenario Creation MS31, MS32, MS33
u2022 LTP Variant Creation & Execution MSBT, SM37
u2022 LTP statistics Evaluation SM37, MS04
u2022 Data Set Up MS70, MSB&
u2022 Evaluation based on Set up data MCB), MCEA, MCEB, MCEC
u2022 Capacity Evaluation CM38
To Summarize -
u2022 In long-term planning, production plans for future demand programs are simulated using MRP runs with reference to the planning scenarios.
u2022 The parameters for the simulation in the simulation planning area are defined in the scenario.
u2022 The Evaluation of LTP Statistics enables identification of Material for which LTP processing was terminated.
u2022 The Data set for purchasing & Inventory Control enables reports for demand analysis
u2022 LTP run with setting for u201CLead time scheduling and capacity planningu201D enables simulation of capacity situation/overload on work centers.
Hope it is helpful to you.
Srini

How to see Planned Purchase Order in Buyer Work Center

Hello,
I need to see Planned Purchase Order
(created in Purchasing Super User(responsibility) => Purchase Order -> Purchase Order , Type (Planned Purchase Order))
in Buyer Work Centre.
I can see Standard Purchase Order in Buyer Work Center (under Orders Tab).
I can see Contract Purchase Agreement in Buyer Work Center (under Agreement Tab).
I can see Blanket Purchase Agreement in Buyer Work Center (under Agreement Tab).
But can not see Planned purchase Order in "Buyer Work Center".
Is this intentional ? If yes, then why.
if no, then where we can see Planned Purchase Order in HTML pages.
Thanks,
Vishal Garg
Mb: 9985803224
Email: [email protected]

hi
there is no standard report which shows the expenditure/conditional value in po. you have to develop your customs report./

I can't see planned order in Long Term Planning Stock/requirements list.

Similar Messages

Maybe you are looking for