I can't see the airport option on my computer--help!

it used to be an option on the botton of itunes but now it is not and i don't know how to get it back!  help!!!!

HDR turns off if you have the camera facing you. Turn the camera around. If HDR doesn't appear try a reset.

Similar Messages

  • I can't see the 'search' option on this site. Am I the only one?

    I'm having an issue with DVDSP and I can't see the 'search' option on this site. Is Apple cutting down on bandwidth for this so they can sell their phones?!
    Anyone else having the same issue?

    frmrt wrote:
    http://discussions.apple.com/ann.jspa?annID=639
    frmrt wrote:
    http://discussions.apple.com/ann.jspa?annID=639
    +Good afternoon,+
    +We have temporarily disabled search and status levels to improve performance of Apple Discussions. We expect this to be a temporary measure.+
    Regards,
    Mark
    +Apple Discussions+
    What the **** does this mean? The performance was just fine! Now, I am unable to efficiently search for information and the performance therefore is awful. How long will this go on?

  • HT4061 I was working on Setting and there was an option ''Zoom''. I made it enable and there after whole screen has been 10 times larger. Now I can Not do anything, even can't open my phone anymore because I can't see the sliding option due to extra large

    I was working on Setting of my iphone4S, and there was an option ''Zoom''. I made it enable and there after whole screen has been 10 times larger. Now I can Not do anything, even can't open my phone anymore because I can't see the sliding option due to extra large screen. Please help me.

    Did you try to tap using three fingers?
    Turn Zoom on or off. Go to Settings > General > Accessibility > Zoom. Or, use the Accessibility Shortcut. See Accessibility Shortcut on page 123.
    Zoom in or out. Double-tap the screen with three fingers.
    copied from page 134 of the user guide iOS7

  • I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me :) Im running ios 6.0.1

    I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me Im running ios 6.0.1

    Well, after another call with Apple support and the engineers, no success.  After spending over 20 hours trying to debug this, I give up.  Apple was basically fishing for a solution with trial-and-error settings on the iphone.  Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
    25 hours of my life I'll never get back.
    Big bummer, and frustrating for all the obvious reasons.

  • HT2534 i can't see the none option in payment method

    i can't see the none option in payment method

    Hello there, harjeetfromsantnagar.
    The following Knowledge Base article offers some great information about your issue in particular:
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/ts5366
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I can't see the iPad option in the preview for the overlays or the folio builder.

    I can't see the iPad option in the preview for the folio overlays or the folio buider.
    I have the content viewer on my iPad and I am logged into it.  This was working before.  Getting a new version of the app does work.
    Please help.

    Hi Bob,
    I think there's still something amiss here.
    I have the v25 Folio Producer Tools for CS5.5 and the v25 Folio Builder panel. (I'm on 10.6.8 for reference.)
    I also have the latest v25 CV from the App Store, and with my iPad Mini plugged in, and the Content Viewer open, the option to side-load still isn't showing.
    I thought it might be because I also had a v24 viewer (custom built) installed, but that's not the case. I uninstalled both of them and just downloaded the v25 viewer from the App Store. The result was the same.

  • HT2534 I can't see the "none" option even though I followed the procedure step by step. What is the problem?

    I can't see the "none" option when trying to open an iTunes account even though I followed the procedure detailed in the apple website step by step. What is the problem?

    jimka_2001 wrote:
    What should I try next?
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Airport Utility can't see the airport, nor are shares visible (Why is there no very extensive 'cookbook' on troubleshooting Airport Extremes?)

    For quite a while my MBP (10.5.8) cannot see the Airport Extreme 802.11n (AE) (2nd ed) anymore when I start Airport Utility (AU) (v5.5.3). My solution was to lower security settings of the MBP to 'accept all incoming connections', knowing that this was not a nice solution. Normally I had selected 'acces for specific services and programs' (the lowest option - my AE differs in language). In the past I denied access for requests that regularly came from mDNSresponder (etc), as I could not easily find out how necessary they were. I am not sure whether Bonjour is running; I try to stick to TCP/IP (without Netbios); the same might be the case with other obscure network services...
    Then I added another network drive (WD Mybooklive) that works based on shares. The installation program worked fine, I was able to set up the drive for Timemachine backups and -in the proces of upgrading to Snow leopard (I always stay one OS version behind)- my MP3 collection could be read from another drive that was connected to the AE.
    I am not sure what exactly lead to the loss, but now I can not see the shares anymore in the finder. Unless I select 'connect to server' (Cmd-K) and fill in afp://ip-adres. I had some trouble with the MBP-drive and Disk Utily could not fix it in multi-user mode. Applejack-auto in single user mode finished after some repairs (catalog file and catalog hierarchy errors), but I doubt that causes the trouble.
    In all cases, internetting and accessing the connected drive was no problem.
    The funny thing is, my Mac Mini (10.5.8) however can see the AE with Airport Utility (different version) fine. Somehow I get the idea that the networkstack  of my MBP has been messed up, but I don't know what it should be, nor how I could check it, or how to repair the stack. But maybe it is not the stack at all.
    Right now, I've just reset the AE by holding the reset button for about 10 s. The name has returned to 'Base Station xx', which is visible in AU, but when I click on another button ('manual configuration' or 'continue'), first the message "Are you sure you want to connect to another wireless network?". Finally no connection appears and the error 'AU cannot find your Airport' shows up (while the Base Station is visible in the left column) - or does not show up when I refuse to switch to another network.
    So, who can help me to reconnect to the Airport Extreme and/or repair the network stack?

    WDS is a difficult setup for many users because it is so easy to make a mistake (while swearing that you are not).
    Apple's instructions for WDS are here:
    http://support.apple.com/kb/HT4262
    I still think the instructions provided by Tesserax are the best available:
    http://discussions.apple.com/thread.jspa?threadID=2422028&tstart=0
    I can't add any more to this other than to say that long ago when I used WDS, I would swear that I had all the MAC addresses entered correctly, etc and would still have problems. So, I ask my wife to watch me and she immediately catches something like I entered a "l" (letter L) instead of a number "1", or a "O" (letter O) instead of a "0" (number zero).
    Finally, there's always the possibility of device that is not holding settings...a defective device.
    Hopefully, Tesserax will have some additional thoughts.

  • Itunes can't see the Airport Express that I'm connecting to... Wierd

    I have my AE set up as a WAP on an ethernet system. I have iTunes over ethernet selected, but now my wireless box can't see the AE even though I'm sending this note over the AE. Does selecting iTunes over ethernet disable the iTunes over wireless?
    The AE is connected to a router, so it is not distributing IP addresses.
    I guess that I should also mention that it's preventing me from seeing other machines on the network and sharing my library.
    Help??

    Unless you've explicitly disabled "Distribute IP addresses" using Airport Admin Utility, your Express is set up as a router and is distributing IP addresses, which is consistent with the fact that you can't see the other machines.

  • Can't see the FaceTime option in Contacts on iPhone4s. Any clues why?

    When I select an individual contact from contacts, I do not see the Facetime option to select.
    Also, went into Settings>Facetime & tried to sign in but got message "Could not signin. Please check your network connection and try again".
    I am using the 3G network and have connectivity via other apps.

    Facetime needs a wifi connection, not 3g.
    MarkxC wrote:
    At the bottom of the contact, there should be 4 buttons. I can't remember what they all say, but one is "Share Contact" and one is "FaceTime". Do you not have those buttons?
    They should be at the top of the conversation.

  • Network works fine but Airport Utility can't see the Airport

    If someone knows of an earlier discussion on this I'd be grateful for a pointer. My Airport Extreme network has been working fine, syncing with Apple TV, accessing the Internet, etc, but The AirPort Utility can't find it! I discovered this when I had trouble printing and started up the Utility to see if there was something I could do to fix it. The utility can't find it but the network is working fine. However I do need to connect a printer to it.
    Any advise on what I can do?

    iFelix wrote:
    I know this may sound obvious and silly, but are you actually connected to your Airport wireless network and not a neighbouring network?
    I thought of that myself and there are at least four networks around my house (three unprotected!) but no, I am connected to the AirPort network!
    I'll try one other thing before I do a hard reset though. A week or two back I'd tried to connect an Airport Express manually by creating a WDS. Never got that to work and that may be a problem. I notice that if I do a soft reset the AirPort Extreme become visible in the Utility for a few minutes. I'll go th manual setup and see if I can't delete that WDS...

  • Why I can't see the update option on my iPad?

    In my iPad I tried to update it but the update option it does not show how can I update it? Please can someone help me?
    thanks and happy holidays..

    That is only a feature of iOS 5 or later...
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • Can't see the Chat Option?

    For some reason now when i want to use the chat option, theres only the call number, I've checked the US site too, theres no Chat function for me either, What's going on?

    I see from looking at your profile that you have an iMac.  If your question is about that machine, you need to clarify what chat you're talking about.  If you are trying to find a chat option for getting in touch with Apple Support, there is none, nor is there e-mail support.  You can call them on the phone or make an appointment at the Genius Bar at an Apple Store.
    If your problem is actually with the Windows 7 PC you are talking about in your responses to Klaus, note that Apple does not (of course!) support that machine, and neither do these forums.

  • HT4600 Just renamed my network and now the airport devices no longer appear on my itunes and can not see the airport on my airport utility?

    help

    What are the make & models of each of your routers in your current network configuration? Is the only thing you changed is the wireless network name? Which version of the AirPort Utility are you using?

  • How can I see the connect option when mapping a printer microsoft iis 7

    We use iis 7 web printing. Firefox is our browser of choice. However, when we go to our webpage to map a printer, and click on a printer, there is no connect option to install the printer. This is only in firefox. Internet explorer works fine once you click the compatibility option.

    Looked through all of material, none have the answer. Firefox browses to the directory fine, x.x.x.x/printers. but you cannot install the printer because the "connect" option is not there.

Maybe you are looking for