I can't see the artistinfo, when I listen to a song.

Hi
I have a question. When you hear a song on your iPod, the title of the song slides, so you can see the whole songtitle.
My question is: Why does the iPod not slide the whole artist name? It only shows you some of the first letters.

None of the current iPods are capable of scrolling the artist names-they only slide the title.
Sorry about that
Leonard Slutsky
Message was edited by: Host

Similar Messages

  • If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? Iwas told it will wipe when a new user opens the device.

    If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? I  was told it will wipe when a new user opens the device.

    No, it will wipe it when they try to connect it to a computer and set it up under their own Apple ID. When they turn on the device the first time without connecting it to anything they will be able to see the video.

  • Can't see the weather when i swipe down, any ideas?

    Updated to iOS7 and now I can't see the weather when I swipe down; I've looked everywhere in settings and can't seem to find a way to do it, can anyone help? Thanks.

    Launch the Weather app and let it update. Then, check the Notifications Center again. Note that the weather now displays differently. It is a text description under the date in the "Today" section of NC.
    Best of luck.

  • TC - 802.11N can's see the TC when it is configured to 5GHz 'n only'

    G'Day
    I am trying to set up my TC to use the 5GHz bandwidth "n only", when I do this I can't see the TC from either my MB Air or Mac Pro (both are n capable).
    Connecting on the 2.4GHz freq is not a problem and the connection shows as being around 120M ie it appears to be connecting at the higher 'n' speed.
    Any thoughts
    thanks

    I had the same problem with my Imac. No connection at 5 GHz but my Macbook Pro could connect no problem. The 5ghz network name would flash for a second in the airport menu then disappear. Never could connect. Finally gave up and changed to 2.4 and everything connects ok.

  • When I highlight text in a PDF I can't see the highlights when I open on iPhone, why is this?

    I'm on a Mac and opened a PDF document in Acrobat.  I then highlighed several pieces of text and then saved the PDF to my desctop.  When I open the PDF with Preview I can see all of the highlights, however when I email myself the PDF and open it on my iphone none of the highlights show up.
    How can I save the hightlights so that I can see them on my iphone?
    Thanks!

    I tried sending directly from Acrobat but had the same issue... When I viewed on iPhone none of the highlights show up.
    To view it on the iphone, I simply clicked the attachment from within Mail to open it up.

  • How can i see the lyrics when i'm listening music on iTunes?

    i've alredy taked the lyrics in the info menu but i don't know how to see it when i'm listening music

    LucaReccia wrote:
    i've already added the lyrics at all the song but i can see it just on my iphone, i want know any plugins for itunes that make me see the lyrics of the current song
    There are no plug-ins to do this.

  • I can't see the video when using the flash player

    Hello everyone, I am having difficulty trying to fix the video of my adobe flash player.  The audio works well on the flash player but the screen is black for the video.  I have read the helpful tips on the adobe website and I have already: downloaded the most recent flash player, managed the add-ons, unchecked activeX filtering, deleted the flash player browsing data, and removed the flash player cache.  I am at a loss for what to do next.  Youtube works fine, but when I go to cbs.com to watch full episodes I can't see anything.  It would be greatly appreciated if anyone can help.  Thank you, Aaron Weinstein

    I went and look up that information and then I went to the AMD website do download the graphic drivers and software and it said that it couldn't so I should contact HP.  I then went to the HP website, put in the information of my computer and looked to see what graphic drivers I could update.  Unfortunately I have the same graphic driver that they are saying is the only update for my computer.  I appreciate the suggestion but it didn't work.  Thanks, Aaron

  • I can not see the InfoObjects when run the Package Import BW Masterdata (BPC 10)

    Hi
    Someone knows a note to fix this issue apparently is security?
    This happens when I login with a user who does not have SAP ALL
    With SAP ALL user I can displayed  the InfoObjects
    Best Regards
    Juan Pablo

    Hi VaraPrasadraju
    Effectively add security objects to a specific role. We test and it worked.
    THANK YOU!!!!
    Best Regards
    Juan Pablo

  • How can you see the progress when using a ForEach loop?

    Hi,
    I have an array with about 100 containers in it. My main thread uses a ForEach loop with an inner case structure with six possibilities. My previous program had all the steps in a very long list, executing them one by one. I find this new approach is much nicer to look at, and easier to change, but there isn't really any way of telling how far along the test is (unless you know it by heart). In the long list approach, you could see all the Done/Passed outcomes and how many remained, now there is no way of telling.
    Any tips on making some kind of progress indication? 
    Solved!
    Go to Solution.

    As ObjectReference parameter, you should use 'Nothing'. The last parameter (synchronuous?) you can choose true or false. Please refer to the documentation of PostUIMessageEx for further information.
    The numeric parameter should range between 0-100. Since it is "Progress Percent", this makes sense, does it?
    The status bar has several panes, one e.g. displaying the logged in user or the used process model. The pane on the right most side will display the Progress Percent if used in your sequence.
    The default reporting, as already stated, includes this feature. So if you have a sequence with e.g. 500 steps, the reporting "will have a visible progress" in that pane (with less than 100 steps, it is most often too fast to see). Remember that NI Sequence Editor and the Full Featured User Interfaces do have this feature, the Simple UI does not have it.
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • HT5922 I can`t see the airplay Icon on my ipad when trying to wactch video with apple tv

    I lost the airplay icon on my ipad 3 , can`t see the icon when trying to watch a video..The software on the ipad and apple tv2 are up to date and they are on the same network. Any solution to this problem? Thanks

    Hello jsimard,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215?viewlocale=en_US
    If the AirPlay icon doesn't appear
    Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
    If you are still unable to see the AirPlay icon  , try one of the following steps:
    If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
    Check Internet or network connectivity on all affected devices.Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
    Best of luck,
    Mario

  • We can't see the our podcast episode on ITunes.

    Hello.
    This is [하루키 라디오(Haruki radio)] producer.
    we find some problem with our podcast episode.
    here is our problem.
    We can't see the episode when searching for [하루키 라디오 haruki radio] on ITunes.
    But, we can see it when we approach to the episode through this URL only.
    (https://itunes.apple.com/kr/podcast/haluki-ladio/id690050964?l=en)
    This URL are given from [iTunes Store Podcast Approved Notification] email.
    +) Here is some images that shows our problem.
    1. When we search in the search box the name of the podcast(하루키 라디오)
    we can't see podcast episode at all!
    2. we can see the episode when we approach to the episode through this URL only.
    (https://itunes.apple.com/kr/podcast/haluki-ladio/id690050964?l=en)
    Please let me know what's wrong with it, via this email.
    thanks!
    Best regards.
    - Moon Dooyeoll
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. This is a user-to-user forum and no-one is going to contact you by email.
    Your feed is at http://pod.ssenhosting.com/rss/ftpom1.xml . It contains one episode, and when subscribing this shows in iTunes. The iTunes Store web page at the address you give shows this episode, but the iTunes Store page within iTunes does not, even though you may notice that it claims to be showing one episode.
    We've seen this peculiar behaviour before; it appears to be a glitch in the Store and as you've evidently done your part correctly there isn't really anything you can do except wait and hope it sorts itself out.
    You could try emailing Support at podcasts 'at' apple.com, but to be honest I doubt you will get any sort of useful reply - though you've nothing to lose by trying.

  • My Epson 645 printer can't see the SSID from my Time Capsule but computers and iPhones can. Any explanation/fix?

    I could understand better if none of my devices could see the AirPort, but everything works fine except my Epson printer and my Canon printer--they simply can't see the SSID when I try to set them up.
    I've had them a year, they have been working fine until today. I simply can't explain the printers couldn't se it, but everything else can.

    Power cycle the printers themselves is perhaps the most important.
    The wifi outage is related.. no doubt about that.
    Sometimes Apple names are difficult for non apple (ie stuff made by anybody but apple) to work with.
    If you have no luck.. full reset is the order of the day.
    Use all names that meet SMB network standards.. that means short,, no spaces.. and stick with pure alphanumeric.
    Apple wizard chooses your name.. plus device name.. so you end up with a name like
    Fred Blog's Airport Time Capsule
    This is hopelessly wrong.. reduce it to FBATC
    The wireless name can be even worse..
    When things go wrong.. setup names that are different for both bands.. and put the band in the name.
    So tc24ghz and tc5ghz work well for me.  I often will have a gen number in there as I repair them and need to know which is which so tcgen324ghz is meaningful.. note no full stop.. no punctuation.. no spaces.. you could use other characters like dash or underscore.. but like I said.. stick with simple.
    Last bit is channels.. wireless is subject to interference.. one thing that can happen is someone starting up a wifi device near you.. (or a microwave with a leaky door etc). Stick to fixed channels.
    The idea is to remove the level of voodoo as much as possible.. ie from 80% to a mere 66%..
    All wireless is voodoo but by controlling as much as you can.. you can reduce it slightly.

  • On the new iTunes, where do I see the number of times I played a song?

    Hi everyone,
    I just downloaded the new version of iTunes (11.0.0.163), and it looks really nice, but I can't see the number of times I played a song, or the last time I played a song. Is there a way to show them again?
    Thank you for helping me :-)
    Danilary

    Two ways,
    1- Right Click a Song  and Click Get Info and there on the Summary Tab is Plays which shows how many times you played a Song
    2- While in the Songs Listview - Right Click on the Columns (where it says Time, Name, Artist etc etc ) and select from that long list, Plays. this will add a new column which will show how many times you played a Song

  • I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    jamestait wrote:
    when I record, my previous track data keeps getting overwritten.
    since you didn't specify, are you recording in a single take?
    http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

    I have rented a movie on apple tv and wish to finish it on my mac book air. When I open iTunes on my mac book air I can not see the movie in iTunes. It is an authorised device and I can see other purchases just. How do I fix it?

    Rented movies downloaded to an Apple TV can't be transferred to any other device.
    (86941)

Maybe you are looking for

  • Battery not charging after dock connector replacement, iPhone4

    Hi all, My iPhone4 suffered mild water damage (water damage indicator not triggered) and misbehaved on that day. So I turned off the device and put it in a bag of rice for almost a month. When I eventually took it out, it was almost as good as before

  • Dynamic text doesnt appear chinese word!!!!

    dynamic text doesnt appear chinese word. i have try to set to arial unicode but still cant. Pls help. THx

  • Bug in list binding editor - change to default iterator name doesn't take

    JDev 10.1.3.2 Not sure anyone has reported this... 1. Drop a View Object onto my jspx as an ADF Form 2. Delete one of the inputs. 3. Drop the attribute (for the deleted input) as an adf select one choice 4. Hit the "Add..." button next to the List Da

  • Capturing Cost in Invoice

    Dear Gurus, We have a process where we do Order - Invoice & Delivery, there is a delay in delivery and Invoice is being raised, we want to capture the cost of the invoice in to some temporary account for time being to the know what is the cost as of

  • J2EE Architect

    Hey guys, I'm a little bit off the topic... We're looking for a strong, senior J2EE architect for a long term consulting opportunity in NJ, but can't find a suitable candidate. Please let me know if anyone is interested. Thanks. I appologize for bein