I can't see the body of my mails, I just se the preview.

I dont know why my mails do not show on the window at the right side of the display.
I can only see on the left side, all the received mails and the 3 lines of the preview, but on the right side only shows From, To and the subject
Anibody has any idea what can I do?
Thanks

Quit the mail app, launch the app again and then look to see if the messages appear, if not - quit the mail app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reset your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

I can't see the preview of my source on Flash media live encoder ... I'm using CamTwist on mac

I can't see the preview of my source on Flash media live encoder ... I'm using CamTwist on mac

Carolyn,
I think your TV might be a rear projection model, correct? Those types of TVs inherently have overscan built into them as part of their optical design. The TV should have some picture SIZE settings that affect how much overscan is present, and some settings may even get rid of it altogether with the result there might be a small black border instead.
Don't worry about changing TV settings. Settings like this are tied to a specific input. So if you make these types of changes while the TV is passing the mini's video through to the screen, those changes will only apply to the mini. When you switch to other inputs, like a cable box, etc., the old settings should still be intact and unchanged.

How can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

How can I see the previews of my D610 in bridge cs5 and how can I open them in my CC photoshop?

Nah. Raw support is version specific and that extends to Bridge as well. Older versions simply won't handle new cameras. If this is important to you, you will have to use Bridge CC.
Mylenium

How can i see the previews of a folder's images from the Thumbnail View?

I mean, in windows XP if you set the Thumbnail View, inside the icon of the folder you can see the preview of the images inside ( like this http://mowd.idv.tw/LonghornPDC/folder_preview.JPG )...
Is there a way to do it on Mac OS X? Maybe some plug-in, some file manager: anything...i often have to check out thousands of photos to find the reference for an illustration, and it's pretty frustrating having to open up every folder...
Thanks in advance
iMac 24" Mac OS X (10.4.9)

but none of these two options allows me to see a folder's images BEFORE opening it...
You want to go back and try that again... just right click on the folder - you don't have to open it - and choose 'Show In PicturePopPro2'.
Check out the icons on the menu bar - you can get a contact sheet view, move from shot to shot using the arrow keys... it'll do what you want.
Regards
TD

I don't know what happened, all of a sudden, the content of here body of my email is not displayed. I can only see the preview lines. I must have inadvertently touched some thing, any idea what happened?

I don't know what happened, the body of my email was not displayed any more. I must have unknowingly pressed something on my I Pad to cause this to happen ? I can read the preview lines ok, but not the mail itself, any idea how to fix this?

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Or...
Double tap the home button to bring up the Recents List
Tap and hold any icon until it wiggles
Press the red to delete the Mail app
Press the home twice button when done.

Lost some of my photos after upgrading, though I can still see the previews.

My 2.66 intel core i5 IMAC recently had a HD crash. Fortuneatly I had a 2T western external HD set up as a time machine. The local Apple reseller checked the HD and had it replaced. When I got my PC back I noticed it had the newer operating system and the newer ilife 11. I attached the time machine and began a restore. All seemed to go well. When I opened iPhoto for the first time, I was prompted to have the library upgraded for the newer software which I did. Then when I went into iPhoto to check my pics. Everything seemed ok until I opened my last import to see that even though I could preview all my pics, I could only open about 20 percent of them. The rest displayed a large grey exclamation point. What has happened and how can I recover these pics? I am now thinking I should keep raw copies of all my photos (have about 40,000), is there a way to export all the raw pics from iphoto without doing each one seperately?
Been a big Apple fan for many years and trying not to let this change my opinion.

Try all options except for the thumbnails. If that fails:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: your current library will be left untouched for further attempts at a fix if so desired.
OT

FCP X 10.0.8 I can´t see the effect preview in the viewer...

Hi:
I update Final Cut Pro X today and now I can´t see the preview of the effect in the viewer when I use the skimmer in the effects thumbnails in the Effects tab.
You konw... if you move the skimmer over the effect thumnail you can see the effect apply or if you hold "alt" key and move the cursor you can change the "amount" of effect to see.
I check to reinstall the app, erase the renders...

Thanks Russ.
I am going your advice and install the Preference Manager (Great stuff from Digital Rebellion) and I deleted the "preferences plist".
I go to open FCPX again and this issue whit the thumbnails in the viewer is remained.
This is madness.
I am going to check my other Mac and install the update to check if the problem is in FCP X or my Mac Pro.
Thankas again Russ
All effects show this issues. White frames, pink frames... I can´t see the preview in the viewer or the thumbnail.
This computer is a Mac Pro 8 Core, 32G Ram, Nvidia GTX 285 GTX Mac Version...
Two days ago I finish a work with 10.0.7 FCP X version and all is ok, I haven´t this issue.

How can I see the contents in a Ref Cursor

I have this code:
CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG
AUTHID CURRENT_USER
AS
type rc is ref cursor;
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
END APOD_C3_LOG_API_PKG;
CREATE OR REPLACE PACKAGE BODY APOD_LOG.APOD_C3_LOG_API_PKG
AS
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
IS
BEGIN
DBMS_APPLICATION_INFO.set_module(module_name => 'APOD_LOG.API_PKG',action_name => 'Fetch_Log_Spec');
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Calling with in_LOCAL_IP_VALUE = ' ||to_char(in_LOCAL_IP_VALUE));
open out_RESULT_SET for
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.123''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.123''') as MULTICAST_IP_VALUE
from
dual;
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Called Fetch_Log_Spec '||to_char(SQL%ROWCOUNT)||' row(s) returned with in_LOCAL_IP_VALUE = '||to_char(in_LOCAL_IP_VALUE) );
END Fetch_Log_Spec;
END APOD_C3_LOG_API_PKG;
And I am trying to test it like this:
DECLARE
IN_LOCAL_IP_VALUE BINARY_INTEGER;
OUT_RESULT_SET APOD_LOG.APOD_C3_LOG_API_PKG.rc;
BEGIN
IN_LOCAL_IP_VALUE := 23374048;
-- OUT_RESULT_SET := NULL; How do I see this
APOD_LOG.APOD_C3_LOG_API_PKG.FETCH_LOG_SPEC ( IN_LOCAL_IP_VALUE, OUT_RESULT_SET );
END;
How can I see the dataset returnd by the OUT_RESULT_SET in SQLPlus or Quest ScriptRunner?

A ref cursor doesn't really contain rows but you can use them to reference a SQL statement that fetches the rows.
Re: returning resultset from procedure...or pkg

In PI aftr imprting WSDL can we see the tags in header fr mapping.

Hi,
We have imported a WSDL in PI 7.1.
There, we are getting the following WSDL structure in "messages" tab of external definition.
Request
          action
          to
          messageId
          replyTo
          referenceParameter
          body
                content ....
My question is in generally when we import the WSDL can we see any body, action,to, messageId etc. tags.
can any body tell me why this tags are coming after importing the wsdl in PI. I am sending the WSDL definition please add starting tags of each xml element. Please help me how to use this kind of WSDL.
?xml version="1.0" encoding="UTF-8"?>
wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:qsvc="urn:schemas-qad-com:xml-services" xmlns:qcom="urn:schemas-qad-com:xml-services:common" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing" targetNamespace="urn:schemas-qad-com:xml-services">
     wsdl:types>
          xsd:schema targetNamespace="urn:schemas-qad-com:xml-services:common" attributeFormDefault="qualified" elementFormDefault="qualified">
               xsd:element name="suppressResponseDetail" type="xsd:boolean"/>
               xsd:element name="dsSessionContext" type="qcom:DsSessionContext"/>
               xsd:element name="dsExceptions" type="qcom:DsExceptions"/>
               xsd:complexType name="Temp_err_msg">
                    xsd:sequence>
                         xsd:element name="tt_level" type="xsd:int" nillable="true"/>
                         xsd:element name="tt_msg_context" type="xsd:string" nillable="true"/>
                         xsd:element name="tt_msg_data" type="xsd:string" nillable="true"/>
                         xsd:element name="tt_msg_datetime" type="xsd:string" nillable="true"/>
                         xsd:element name="tt_msg_desc" type="xsd:string" nillable="true"/>
                         xsd:element name="tt_msg_field" type="xsd:string" nillable="true"/>
                         xsd:element name="tt_msg_index" type="xsd:int" nillable="true"/>
                         xsd:element name="tt_msg_keys" type="xsd:string" nillable="true" maxOccurs="6"/>
                         xsd:element name="tt_msg_nbr" type="xsd:string" nillable="true"/>
                         xsd:element name="tt_msg_processed" type="xsd:boolean" nillable="true"/>
                         xsd:element name="tt_msg_sev" type="xsd:string" nillable="true"/>
                    /xsd:sequence>
               /xsd:complexType>
               xsd:complexType name="TtContext">
                    xsd:sequence>
                         xsd:element name="propertyQualifier" type="xsd:string" nillable="true"/>
                         xsd:element name="propertyName" type="xsd:string" nillable="true"/>
                         xsd:element name="propertyValue" type="xsd:string" nillable="true"/>
                    /xsd:sequence>
               /xsd:complexType>
               xsd:complexType name="DsExceptions">
                    xsd:sequence>
                         xsd:element name="temp_err_msg" minOccurs="0" maxOccurs="unbounded" type="qcom:Temp_err_msg"/>
                    /xsd:sequence>
               /xsd:complexType>
               xsd:complexType name="DsSessionContext">
                    xsd:sequence>
                         xsd:element name="ttContext" minOccurs="0" maxOccurs="unbounded" type="qcom:TtContext"/>
                    /xsd:sequence>
               /xsd:complexType>
          /xsd:schema>
          xsd:schema targetNamespace="http://www.w3.org/2005/08/addressing" attributeFormDefault="qualified" elementFormDefault="qualified">
               xsd:import namespace="urn:schemas-qad-com:xml-services:common"/>
               xsd:element name="Action" type="wsa:ActionType"/>
               xsd:element name="To" type="wsa:ToType"/>
               xsd:element name="RelatesTo" type="wsa:RelatesToType"/>
               xsd:element name="MessageID" type="wsa:MessageIDType"/>
               xsd:element name="ReferenceParameters" type="wsa:ReferenceParametersType"/>
               xsd:element name="ReplyTo" type="wsa:ReplyToType"/>
               xsd:simpleType name="ActionType">
                    xsd:restriction base="xsd:string"/>
               /xsd:simpleType>
               xsd:simpleType name="ToType">
                    xsd:restriction base="xsd:string"/>
               /xsd:simpleType>
               xsd:simpleType name="RelatesToType">
                    xsd:restriction base="xsd:string"/>
               /xsd:simpleType>
               xsd:simpleType name="MessageIDType">
                    xsd:restriction base="xsd:string"/>
               /xsd:simpleType>
               xsd:complexType name="ReferenceParametersType">
                    xsd:sequence>
                         xsd:element ref="qcom:suppressResponseDetail"/>
                    /xsd:sequence>
               /xsd:complexType>
               xsd:complexType name="ReplyToType">
                    xsd:sequence>
                         xsd:element name="Address" type="xsd:string"/>
                    /xsd:sequence>
               /xsd:complexType>
          /xsd:schema>
          xsd:schema targetNamespace="urn:schemas-qad-com:xml-services" attributeFormDefault="qualified" elementFormDefault="qualified">
               xsd:import namespace="urn:schemas-qad-com:xml-services:common"/>
               !xsd:include schemaLocation="maintainItemSitePlanning-eB2_2.xsd"/>>
               !xsd:include schemaLocation="maintainItemSitePlanningResponse-eB2_2.xsd"/>>
               xsd:element name="maintainItemSitePlanning" type="qsvc:MaintainItemSitePlanningType"/>
               xsd:element name="maintainItemSitePlanningResponse" type="qsvc:MaintainItemSitePlanningResponseType"/>
               xsd:complexType name="MaintainItemSitePlanningType">
                    xsd:sequence>
                         xsd:element ref="qcom:dsSessionContext" minOccurs="0" maxOccurs="1"/>
                         xsd:element ref="qsvc:dsItemSitePlanning" minOccurs="0" maxOccurs="1"/>
                    /xsd:sequence>
               /xsd:complexType>
               xsd:complexType name="MaintainItemSitePlanningResponseType">
                    xsd:sequence>
                         xsd:element name="result" type="xsd:string"/>
                         xsd:element ref="qcom:dsSessionContext" minOccurs="0" maxOccurs="1"/>
                         xsd:element ref="qcom:dsExceptions" minOccurs="0" maxOccurs="1"/>
                         xsd:element ref="qsvc:dsItemSitePlanningResponse" minOccurs="0" maxOccurs="1"/>
                    /xsd:sequence>
               /xsd:complexType>
               xsd:element name="dsItemSitePlanning">
          xsd:complexType>
               xsd:sequence>
                    xsd:element name="itemSitePlanning" type="qsvc:ItemSitePlanningType" maxOccurs="unbounded"/>
               /xsd:sequence>
          /xsd:complexType>
          xsd:unique name="PK_itemSitePlanning">
               xsd:selector xpath=".//itemSitePlanning"/>
               xsd:field xpath="ptPart"/>
               xsd:field xpath="site"/>
          /xsd:unique>
     /xsd:element>
     xsd:complexType name="ItemSitePlanningType">
          xsd:sequence>
               xsd:element name="operation" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptPart" type="xsd:string" minOccurs="0"/>
               xsd:element name="site" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpMs" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpPlanOrd" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpTimefnce" type="xsd:int" minOccurs="0"/>
               xsd:element name="ptpOrdPol" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpOrdQty" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpOrdPer" type="xsd:int" minOccurs="0"/>
               xsd:element name="ptpSftyStk" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpSftyTme" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpRop" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpRev" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpIssPol" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpBuyer" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpVend" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpPoSite" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpPmCode" type="xsd:string" minOccurs="0"/>
               xsd:element name="cfg" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpInsRqd" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpInsLead" type="xsd:int" minOccurs="0"/>
               xsd:element name="ptpCumLead" type="xsd:int" minOccurs="0"/>
               xsd:element name="ptpMfgLead" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpPurLead" type="xsd:int" minOccurs="0"/>
               xsd:element name="atpEnforcement" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpAtpFamily" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpRunSeq1" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpRunSeq2" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpPhantom" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpOrdMin" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpOrdMax" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpOrdMult" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpOpYield" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpYldPct" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpRun" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="ptpSetup" type="xsd:decimal" minOccurs="0"/>
               xsd:element name="btbType" type="xsd:string" minOccurs="0"/>
               xsd:element name="emtAuto" type="xsd:boolean" minOccurs="0"/>
               xsd:element name="ptpNetwork" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpRouting" type="xsd:string" minOccurs="0"/>
               xsd:element name="ptpBomCode" type="xsd:string" minOccurs="0"/>
          /xsd:sequence>
     /xsd:complexType>
     xsd:element name="dsItemSitePlanningResponse">
          xsd:complexType>
               xsd:sequence>
                    xsd:element name="itemSitePlanning" type="qsvc:ItemSitePlanningResponseType" maxOccurs="unbounded"/>
               /xsd:sequence>
          /xsd:complexType>
          xsd:unique name="PKResponse_itemSitePlanning">
               xsd:selector xpath=".//itemSitePlanning"/>
               xsd:field xpath="ptPart"/>
               xsd:field xpath="site"/>
          /xsd:unique>
     /xsd:element>
     xsd:complexType name="ItemSitePlanningResponseType">
          xsd:sequence>
               xsd:element name="ptPart" type="xsd:string" minOccurs="0"/>
               xsd:element name="site" type="xsd:string" minOccurs="0"/>
          /xsd:sequence>
     /xsd:complexType>
          /xsd:schema>
     /wsdl:types>
     wsdl:message name="processQdocMessageRequest">
          wsdl:part name="action" element="wsa:Action"/>
          wsdl:part name="to" element="wsa:To"/>
          wsdl:part name="messageID" element="wsa:MessageID"/>
          wsdl:part name="referenceParameters" element="wsa:ReferenceParameters"/>
          wsdl:part name="replyTo" element="wsa:ReplyTo"/>
          wsdl:part name="body" element="qsvc:maintainItemSitePlanning"/>
     /wsdl:message>
     wsdl:message name="processQdocMessageResponse">
          wsdl:part name="to" element="wsa:To"/>
          wsdl:part name="action" element="wsa:Action"/>
          wsdl:part name="messageID" element="wsa:MessageID"/>
          wsdl:part name="relatesTo" element="wsa:RelatesTo"/>
          wsdl:part name="body" element="qsvc:maintainItemSitePlanningResponse"/>
     /wsdl:message>
     wsdl:portType name="QdocWebService">
          wsdl:operation name="processQdocMessage">
               wsdl:input name="processQdocMessageRequest" message="qsvc:processQdocMessageRequest"/>
               wsdl:output name="processQdocMessageResponse" message="qsvc:processQdocMessageResponse"/>
          /wsdl:operation>
     /wsdl:portType>
     wsdl:binding name="SoapBinding" type="qsvc:QdocWebService">
          wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          wsdl:operation name="processQdocMessage">
               wsdlsoap:operation soapAction=""/>
               wsdl:input name="processQdocMessageRequest">
                    wsdlsoap:body parts="body" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageRequest" part="action" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageRequest" part="to" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageRequest" part="messageID" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageRequest" part="referenceParameters" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageRequest" part="replyTo" use="literal"/>
               /wsdl:input>
               wsdl:output name="processQdocMessageResponse">
                    wsdlsoap:body parts="body" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageResponse" part="to" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageResponse" part="action" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageResponse" part="messageID" use="literal"/>
                    wsdlsoap:header message="qsvc:processQdocMessageResponse" part="relatesTo" use="literal"/>
               /wsdl:output>
          /wsdl:operation>
     /wsdl:binding>
     wsdl:service name="QdocWebService">
          wsdl:port name="QdocWebService" binding="qsvc:SoapBinding">
               wsdlsoap:address location="http://localhost:8080/qxtendserver/services/"/>
          /wsdl:port>
     /wsdl:service>
/wsdl:definitions>
Thanks and Regards
Riju

Hi All,
Thanks for your input.. Is it the same wiht Oracle Database also?? Cant we insert/update records in View Tables using SAP PI?
I am trying to insert records in a view table in SQL server but getting error message... where as when I try to insert in TABLE ..Its working..
Any inputs on this..
Thanks
Rajeev
Edited by: rajeev raj on Apr 26, 2010 11:03 AM

How can i see the URL which has length more than 255 chars in fucnction

Hello Every body....
I am facing one problem....I have a function module which returns URL in one table
but in the function module display i am able to see only 255 characters,but the URL is more than 255 Characters..How can i see the URL which has the length more than 255 characters..
In the Table the fields url length is 4000 chars.....
but display it is showing only 255 chars.....
Please Help me...??????????

Hello,
Have you tried breaking your structure into 255 chunks? I don't know what the structure you are moving from looks like, but you should be able break it back up into the SOLI structure. The end of a line in SOLI doesn't create a Carriage Return/Line Break. You have to insert these yourself like in the following:
* Create document
      clear mail_line.
      move 'This is a test E-Mail'(d01) to mail_line.
      concatenate mail_line
                  cl_abap_char_utilities=>newline
                  into mail_line.
      append mail_line to l_mailtext.
What kind of attachment are you wanting to create - a text tab delimited file for reading in a spreadsheet application such as excel? You might try reassembling your data table into a single string with newlines where you need them. Then use function module SCMS_STRING_TO_FTEXT to turn it back into SOLI. This is what I have done in the past. I'm afraid without knowing more about your source structure and attachment type, this is about all I can tell you.
Vasanth

I can´t see the control of iTunes for Sync my iPhone

Hi, some one knows what can I do for fix it, because I can´t see the menus or controls of itunes for updates some body help pls!!

That link is everywhere as an answer to this question! Well, it is now outdated or dead, and provides no help to people like me whose source list has gone missing. Someone please help.
I have no source list and no cute little bar with cute little dot. It literally looks like they fell off the left side of the iTunes window, and no amount of resizing, dragging, or rebooting will draw them back out.
If anyone knows how to fix this without referring to Scott Patrie, please let me know. In the meantime I will be gouging my eyes out with a plastic letter opener while I rue bitterly the day my boyfriend gave me this crappy iPod. Thank you.

Can't see some body emails in "Gmail"

In "Gmail", in some emails, I can't see the body of the email. This only happens in Firefox.
In Internet Explorer and Chrome does not happen this problem.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache. Note: This will temporarily log you out of all sites you're logged in to. To clear cache and cookies do the following:
# Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
# Under "Time range to clear", select "Everything".
# Now, click the arrow next to Details to toggle the Details list active.
# From the details list, check Cache and Cookies and uncheck everything else.
# Now click the Clear now button.
Further information can be found in :
[[Clear your cache, history and other personal information in Firefox]]
If the above solution doesn't work you can try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. Note: This will cause you to lose any Extensions (likely wont lose Kaspersky's addons), Open websites, and some Preferences.
To Reset Firefox do the following:
# Go to Firefox > Help > Troubleshooting Information.
# Click the "Reset Firefox" button.
# Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
# Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]]
Did this fix your problems? Please report back to us!
Thank you.

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
Thanks in advance for your help!

With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

I can't see the body of my mails, I just se the preview.

Similar Messages

Maybe you are looking for