I can't see the timeline or Project panel when opening my project

i dont know what happened, i clicked in a button and i dont know what button. My right video, the editor, and the timeline were gone, i was editing a video for 5 hours and a half. I saved the video, but when i open the project doesnt have a timeline and the right video dont have anything. I know that i dont lost my video, because when i open the project let a long time to open, and my other projects open normally. Just that project that's happening this. Anyone know what's going on? I need to show this project tomorrow. Thanks a lot.
Message was edited by: Kevin Monahan
Reason: a more searchable title was needed

Look, I can't drag anything to the timeline and to right video. I was saving and just gone everything. I can open the timelife, but when i close the premiere and open my project again, its not there, and my video doesn't appers. and i think that my project is intact because it takes 1 minute to open. And i saw my video is 2,7GB. Can u help me?

Similar Messages

  • Why can't see the timeline audio waveform on sequences inside another sequence in Premiere Pro CS6? Can I fix this?

    Does anyone know why I can't see the timeline audio waveform on sequences inside another sequence in Premiere Pro CS6? Can I fix this?

    PERFECT!!! THANK YOU, Ann!!!

  • I do not see the small thumbnail pictures anymore when opening elements.

    I am using Photoshop elements for quite some time on a Dell PC and another windows PC. SInce recently I do not see the small thumbnail pictures anymore when openning elements. I only see the grey boxes with the sandglasses. When I then click on a grey box to see the picture in a fitting screen size. I have tried to wait for a long time, but it does not change I keep the grey boxes when I want to see more than one picture on the screen. This is the case in both PS'c. What has happened and how can I restore to the normal set up where I can see the pictures again in smaller size?

    Hi,
    Please follow the instructions mentioned in the blog and see if your issue is resolved.
    Thanks!!

  • Can't see the list of projects and events

    I upgraded from iMovie 09 to iMovie 11 today. But since my upgrade, I cannot see the projects and events in the iMovie 11 window. Attaching a screen shotbelow:

    no, there is contents. i just figured it out.
    to recap: i had 2 problems: one was that i couldn't see the contents of the shuffle. the other was that i couldn't eject my shuffle. when i tried to eject, i kept getting the message that i couldn't eject because an application was using the files on the ipod. when i clicked the icon of my shuffle i got the picture of the ipods with the heading "ipod + itunes," as i recall. there were no settings or content tabs.
    now i realize there were no tabs because i had not finished the registration of the shuffle on my pc. i had registered the shuffle on the website without using itunes. i didn't realize that there was more i needed to do in itunes because i couldn't see all of the buttons in my window. when i followed through with the registration in itunes all the way to the end, the 2 tabs were revealed and the songs that i had already loaded on the shuffle were listed in "contents." and, i was able to eject the shuffle. apparently itunes (or whatever) was still looking for a completed registration and wouldn't release the shuffle. sigh.
    if you can not see the settings and contents tabs in itunes when you click your shuffle in devices or you can not eject the shuffle, look at the window with the picture of the ipods in itunes. there is more below. complete the registration (i had already done so on the web earlier, but my itunes was not complete.).
    thanks to everyone for your help.
    power spec 8921 (pc)   Windows XP  
    power spec 8921 (pc)   Windows XP  

  • Can't see the caller on my iPhone when making a vi...

    How do I set up my iPhone 4S to view the caller when making a video call. I can see me on my phone and the caller can also see me on their PC
    Solved!
    Go to Solution.

    I have the same problem (I can see me during a video call on my iphone 4s but can't see the other person). In my case, there is no duplicate contact issue...I simply can't see the other party and instead see a full screen image of myself. Help please!!

  • HT201077 I can not see the photos I have chosen when I post them on my Mac yet I can see them both on my iphone and Ipad.

    I can not see the photos ( Shared Photostream) I have chosen when I post them on my Mac yet I can see them both on my iphone and Ipad.
    If I post them on my other devises they do show up on my mac but if I add to them from my Mac they still have a no show on it but in turn they are now on my other devises.
    What am I doing wrong please??

    Rented movies downloaded to an Apple TV can't be transferred to any other device.
    (86941)

  • What is up with the I pad pre loaded Calender?  Am told it is faulty, which is why I can't see the month of March.  When will this be sorted.  It is a nuisance

    What is up with the preloaded Calendar on my I pad?  I can't see the month of March!  Am told that there is a fault, but when will it be fixed?

    I have to assume that Apple is aware of it and its working on it. Hopefully, it will be fixed in a new update. But nobody here knows when that will be.
    A workaround is to remove any all day events from April 1st or change them to a few hours  - but remove all day events.

  • Can't see the video's to edit

    Can't see the video's to edit
    when i move the mouse over the video's they should appear in the upper right screen, but i get black screen when i click on the play icon down left, i still get black screen, the only videos i can see should be moved to the editing area,
    why is that and is there a fix for it soon?
    i have screen shots of the problem, but i can't find anywhere here to post them

    am i the only one getting this?
    i can't work with imovie like that its not useable like that at all

  • Can´t see the images from my contacts

    Since yesterday i can´t see the images from my contacts when receiving a call on my iphone 4S. Please help me.

    Yes they are.
    Enviado do meu iPhone
    No dia 26/06/2014, às 20:15, Apple Support Communities Updates <[email protected]> escreveu:
    You received a reply
    James Ward4 has replied to your question. You can view the full discussion in Apple Support Communities.
    can´t see the images from my contacts                                                                            
    Are those images still in your Photos app?
    Correct Answer  Helpful Answer
    Use the buttons above to tell James Ward4 and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
    To reply to James Ward4, go to the discussion in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • How can i check the last location of iphone when it was on?

    I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
    the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
    plz plz help me

    it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
    i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

  • Can not see the device net Master Interface in my project.

    Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

    Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
    Are you able to hold the C key down when you reboot, to boot off the installation disk?

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • Making a slide show and can only see the top 1/4 of the bottem line of photos in the project.  help?

    I am working with beat markers and it was going along fine until suddenly everything went awry.  I dropped in a bunch of photos and the last photo assigned itself a time of over 3 minutes.  Beat markers are at less than 1 second.  I have removed the beat markers for the photos I want to remove, in order to try again.  When I try to delete the 3 minute picture the entire project loses its beat markers AND on top of all of that, I can only see the top 1/4 of the pics in the bottom line of the project.  I've tried several work arounds and can't fix this.  Anyone have suggestions?

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • I can't see the duration in the timeline...

    I'm working in CP5 on a Mac and I can't see the slide duration in the timeline. It's cut off. I tried closing out the timeline panel and re-opening it. I tried dragging it up and down and I can't get the entire bar to show up. Has anyone had this problem?

    Hi Kristen
    Recreate Preference file of Captivate 5
    http://helpx.adobe.com/captivate/kb/troubleshoot-unexpected-behavior-captivate-4.html
    Hope it helps
    Thanks
    VJ

Maybe you are looking for

  • Repository variable is not working for prompted date

    Hi experts.. I have created one repository variable sum(amount1), but it is not filtering according to date local.... i need to filter it according to date local.

  • BOM to PDF

    Hi, I am playing with Adboe to see if there is a way to autocreate a BOM (Bill of Materials) parts structure complete with 2D drawings.  This is a typical Engineering application i.e., you have a Bill of Materials with assemblies and parts, the parts

  • Compressor Submit Button Grayed Out.

    I am new to FCP compressor. Recently my compressor won't let me click the submit button. It is grayed out. I have trashed my Compressor plists. I have tried Compressor Repair. I have trashed applications Qmasters and Compressor and reinstalled them.

  • Sync-ing Notes via iCloud to a PC (Windows)

    So here's the deal, I have an iPad, Macbook Pro, iPhone and work machine running windows 7. I'm currently sync-ing notes and reminders across all of my Apple devices, and would like to have access to them on my work PC (windows) as well. Is there a w

  • The Aironet 1240AG Autonomous Web Interface authentication

    Hi, I would like to know if the Aironet 1240AG Autonomous, is capable to do Web Interface authentication (like a public hotspot, so no security on Wifi, but you will only get access to the network/internet when one has opened a Internet Browser and g