I can't seeing/accessing my desktop

I have a problem with how my desktop is working (or not as the case may be). A solution would be greatly appreciated and apologies in advance if I'm missing something obvious.
This morning I installed and used installed itubedownloader on trial and saved a downloaded mp4 file to my desktop. However, [all of my] desktops are now blurred/translucent and I am unable to access desktop folders - or do anything on my desktops. The itubedownloader programme appears genuine (and a very easy product to use).
This is not a blurred/pixellated display question as all my apps runs clearly in the foreground, as and when they are opened. I have tried turning off the transparency settings (Accessibility>Reduce Transparency) but that made no effect. I have restarted with no effect.
The oddity is that as I move between desktops the resolution clears and I can see what is underneath.
This is best explained with an image:
And as I try to move between desktops what my desktop should look like.

Hi, XPS is a sort of virtual printer that comes with Windows. Make sure to select your printer and not XPS.
If that doesn't work, try rebooting your Home Plugs and router.
Hope that is of some help.

Similar Messages

Can't see folders on desktop

I restored a backup and computer tells me I can't see files on desktop even after I verify disk permissions
How do I fix this?

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Can't see my blackberry desktop software

I need help,can't see my blackberry desktop software and I need help on how to download it. I'm using a blackberry curve 9220. Thanks

Hi and Welcome to the Community!
Start here:
http://us.blackberry.com/software/desktop.html?LID=us:bb:software:desktopsoftware&LPOS=us:bb:softwar...
Otherwise, please expand on "can't see"...I'm not quite sure what you mean by that.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I cannot turn voiceover off in Ipad2. Also can not see accessibility button on seetings / general. Last button i can scroll is "RESTRICTION" button.

I cannot turn voiceover off in Ipad2. Also can not see accessibility button on seetings / general. Last button i can scroll is "RESTRICTION" button. I also tried triple clicking home button, still can not get over. Please help.

Are you not able to scroll down the righ-hand side of Settings > General using three fingers on the screen ?
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes:Connect iPad to your computer and select iPad in the iTunes device list. Click Summary, then click Configure Universal Access at the bottom of the Summary screen.
So select Configure Universal Access at the bottom of the Summary tab and set 'Seeing' to 'Neither'

HOW CAN I SEE/ ACCESS BACKUPS ON EHD ATTACHED TO A TIMECAPSULE

Hie. Can anyone let me know how I can see/access my backups on an external hardrive that is attached to the back of the TimeCapsule please.
I've managed to Archive my TimeCapsule backups on the EHD that's plugged into the USB port on TimeCapsule but don't know how to see them ,many thanks

Ok I've worked it out I take the EHDrive out the TimeCapsule & attach it to my mac then I click on the EHDrive & there is the Sparsebundle file But how can I actually see the files with all the data on them?
MacBook Pro Mac OS X (10.6.4) iPhone 4/macbook Pro/ iPad 32GB/TCAPSULE 1TB

Crystal Reports 2008 can't see/access ECC function module

My team is developing our first Crystal Report directly against ECC data and are experiencing the following problem:
Our ABAP team created a custom RFC to provide the needed data, but we are unable to see a full list of available Functions and list of available tables from SAP ECC data source.
We worked with Security and temporarily ran under SAP_ALL authority but were still unable to see/ access the function module. We have the integration kit installed and can see some function modules from within Crystal, just not the ones we need. Is there some trick to creating a function module so that it is visible to Crystal?
Environment Details:
Crystal reports Version- 12.2.3.467
SAP GUI # 7200.1.2.1051
CRDB_OpenSQL.Dll # 12.2.3.467

Hi Ingo. I enjoyed your BO 4 seminar and meeting you at ASUG/Sapphire. I was hoping you'd pick this up.
The connection options shows the info below. It doesn't seem to be telling us how to filter to either select or exclude SAP ECC function modules. It has options to? Are these options correct to see ECC function modules and should we be seeing other options?
Database tab (only tab in dialog)
- Show name description or both (Show description selected)
- Sort tables or fields alphabetically (sort tables selected)
- Select tables, views, system tables, synonyms, and stored procedures (all except synonyms selected)
- Table like and owner like (both blank)
Advanced Options (x = selected)
- (X) Use indexes on server
- ( ) perform grouping on server
- (X) Database Server is case sensistive
- (X) Select Distinct for Browsing
- ( ) Perform query async
- (X) Verify on first refresh
- ( ) Verify stored procedures on first refresh
- (X) verify when database driver upgraded
- (X) Automatic smart linking

MSI GeForce 9800 gt after updating the driver can't see the whole desktop

I have a MSI GeForce 9800gt, and I've tried to update the driver. After update I can no longer see the whole desktop, I have to move the mouse to the edge of the screen to see the rest, it's like there is a zoom or something.
The driver that came with the CD works fine, but any other driver give's me the same problem. I've tried with v.191.07, v.178, v.258.96, v.306.81 and a few other. I've also reinstall the windows but with no better results (I'm using Windows XP Pro).
Please help. Thank you.

Thanks for the quick replay, so :
Quote
Did you try to set the correct resolution for your screen after updating?
Yes, I've tried different resolutions, the only resolution where I see the whole desktop is 800x600. I even try to change the refresh rate to something lower then 60Hertz(I've read on a forum that a refresh rate of 51 or 59 might solve the problem) but no luck.
Quote
clean old drivers with >>Driver Fusion<< in Safe Mode 1st,
then reinstall vga drivers
I've tried this as well, I even try with a fresh install of windows, I've bought a new SSD for my system disk, so I have reinstall the windows.

Can't see/access newly created chat rooms

We have an issue where users can create chat rooms but are unable to see/access them after they're created. Does anyone have any experience with this and knows why this happens and how to fix? Thanks.
Mike

MFischma,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Finder stopped working altogether, and can't see Volumes on desktop

I cannot open a finder window and I can't open any folders on the desktop either and my harddrives aren't showing up.
I updated to 10.4.5, I also recently turned on "see hidden files" but later turned it off
Another weird circumstance was for a few sessions all my desktop icons were very pale in color, thats gone away, now its just the finder issue, which incidentally makes my machine run like crap when I AM able to open something from dock.

Had a similar situation. Spinning beach ball in finder, no icons on desktop, not even the hard drive. Turns out it was a problem with something I had tried to move out of the trash to the desktop -- a font I was trying to eliminate while running FontDoctor.
Solution was to change startup disk to a bootable external firewire hard drive and restart. (If you don't have an external bootable drive, but have access to another Mac, then you can have your computer's hard drive show up as a desktop icon on the other computer by powering down your computer, connecting it to the other computer via Firewire and powering up again while holding down the T key.)
With the external drive as the startup disk, I was able to access my hard drive / users / my name / desktop. From there I dragged the offending font to the trash in the dock of the external drive and emptied it. Also, as there was unemptied trash in the dock of my computer's hard drive, I typed the word "trash" in Spotlight which revealed, among other things, a folder in Users called .trash. Sure enough, when I double clicked on the folder, my trash from the original start-up disk was there, full of all sorts of things. So I dragged the contents to the trash bin of the backup drive, emptied it, then selected the original drive as the startup disk and restarted.
Alas, everything was back to normal. Hard drive icon, desktop stuff, and no spinning beach ball. Hope this helps.

Why can't I access my desktop library through home sharing on my laptop?, Why can't I access my desktop library through home sharing on my laptop?

I just bought a new laptop and it has the latest update of itunes as does my desktop computer. I have turned on home sharing on both devices and am signed in to my account yet I cannot access my itunes library from my desktop on my laptop. Can you help me?
Ollie

If the iTunes Library.itl file is also on the external drive, try launching iTunes while holding down the Shift key, and when the dialog window opens that allows you to create a new library or open an existing one, choose to open an existing one, navigate to the folder that contains that library file and select it.
If that works, note for the future that if you launch iTunes when that external drive isn't mounted, iTunes will default back to the normal location on the internal drive and you'll have to repeat the Shift-launch process.
Hope this helps.

Can't see/access Drop Box in one user account

Here's an odd problem. We have four user accounts on our iMac. I can see and access everyone's Drop Box except for one user. No one can access that user's Drop Box. When you navigate to MacHD > Users > User1 > Public, that's as far as you can go. Drop Box does not show up. You can still drop files into Public.
I checked the Sharing and Permissions for User1's Public folder and Drop Box, and they match the settings for all the other users. I also looked at the Shared and Locked checkboxes, and they match the other users.
I'm stumped. It's no big deal, really, since you can still drop stuff off into Public, but it's also something that's not working right.
Anyone have an idea what could be wrong?

Snap And like you said, I have both machines set up with exactly the same settings. Another bug or something I'm doing wrong? Please reply if you figure out the solution.

Can't see camera on desktop since installing LR3

I need to import some photos quickly, and I couldn't figure out the date file system in LR (I had created separate subject-named DNG and RAW folders to import into, but it kept trying to create date folders within those), so I wanted to just go back to my old way of importing until I can buy a LR3 book. (By the way, what do computer companies have against providing printed manuals these days??? It drives me crazy. The help search field offered me no results when I typed in the term "Convert to DNG" and then just "DNG" to find out exactly what that option did.)
But now my camera doesn't show up on my desktop or in the Finder window for me to do a manual upload. Does LR3 prevent you from accessing your camera without its help?
Thanks.

I figured this out myself. Turns out to have been an Aperture issue. I had recently uninstalled a trial version of Aperture, and since it had made itself the default opening app for cameras, there was no longer an app designated, which resulted in the camera not showing up at all.

Can't see HD on desktop

One of my freelancers just got a new 27" imac running 10.6.4. There is no HD icon on desktop. I can see an app folder in the dock with her imported apps (she used apple migration to move stuff from her laptop to imac). But there is no HD icon anywhere to be found. How do I get HD to appear on desktop?

Hi Richard
Click anywhere on the Desktop and bring Finder to the Menu bar > select Finder > Finder Preferences > select the General tab > check the boxes next to Show these item on the desktop:
Dennis

Win10 file explorer can't see MyCloud but desktop app can.

I am using the final Win10 software (well, build 10240 anyway). Previous builds all worked fine with MyCloud but now file explorer doesn't show it under Network. However the WD Cloud app can see everything on it and I can access the device ip address in my browser ok. I'm missing something very obvious I think but what?!Brian

I don't know the drive name. There is WD service running which says it is for 'discovery' but I knew that since WD software can see it, just file explorer can't.

Can't see/access iphoto photos from Photoshop....

Thanks to those who responded to my last thread..... I am going to try those suggestions. Interestingly, when I took the imac to the genius bar, they threw their hands up and said it couldn't be done ......
meanwhile, I have the same issue trying to open iphoto photos from other apps, like Facebook, Snapfish, etc when trying to upload photos... will the same advice from before also work for this?
Thanks very much,
Aeron

There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

I can't seeing/accessing my desktop

Similar Messages

Maybe you are looking for