I Can't seem to change the write speed when building a BluRay disc in encore

I burned a Bluray project on disc and the video freezes after about a minute on each chapter, someone reccomended changing the BD-R disc brand and burn with a slower write speed (2x or 4x) But when I'm in the build panel, the destination section where the write speed section is blank and appears greyed out, so I can't change it. Can somebody guide me in how to fix this?
I'm on encore CS5 running on a Mac 10.7.4.
The Burner is a 12x LaCie D2 Blu Ray burner. Any suggestions?

Hi Stan, thanks for the quick reply, I took your advice and did the build as an image and then burned the project at the recommended write speeds in Toast Titanium (10.0.9). The first burn was at 4x and the second was at 2x BD (an option in Toast) both speeds gave me the same result. It solved the issue with the freezing during disc playback, however, when I tried to navigate from chapter to chapter the disc, once again, freezes. Additionally, although it doesn't freeze during playback as with my previous burns, there's still slight skip at the same positions where there used to be a freeze.
I'd be content at this point with the slight skip, but it's been one issue after another with these BluRay authoring projects. This is my first project switching from FCP and I've burned 11 Bluray discs on this project and still don't have a deliverable project that I can give to my client. Not what I was expecting from Encore. Any help would be greatly appreciated.

Similar Messages

  • I have an IPhone 5 with 2 email accounts and I can't seem to change the sound for my primary account. When I change the sound it is for my secondary email account which I hardly use. How do I change the sound for my primary account?

    I have 2 email accounts on an IPhone 5 and can't seem to change the sound for my primary email account.

    Try going to Settings>Notifications>Mail, tap your primary account, then tap New Mail Sound and set as desired.

  • I got a new e-mail address and I reset my iPod so it already has the new email address. I can't seem to change the address on my iPad or iPhone. Please help me change the address on all my devices!

    I got a new email address and I reset the iPod so it already has the new address. I can't seem to change the address on my iPhone5 or iPad. So please help! How do I change the address for my apple ID and icloud on all my devices? I don't want to reset my iPad and phone just to set new email address I can't do updates without the password and I have forgotten my password for my old email address. Please Help! Getting frustarted!

    If the old ID ("email address") is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    I am working in Numbers and can't seem to change the generic value assigned to the legend.  Any advice on how to select the legend and save new values?

    Ntenich,
    If your table has a Header and your Legend text is in the header, it will be picked up by the table.
    Jerry

  • Can't seem to change the Document Properties Advanced Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

    Can't seem to change the Document Properties > Advanced > Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

    LiveCycle forms use a very different approach to create a PDF form than Acrobat and that approach makes many features for processing PDFs non-functional.
    You might want to ask this question in one of the LiveCycle product forums.

  • I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?

    I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?
    My ideal date format would be / 28, Oct, 2015
    can anyone help? I'm not sure I can manipulate the {tag_postdate}

    You can use something like this in the post or post list: {tag_blogpostday}, {tag_blogpostmonth}, {tag_blogpostyear}

  • Hello I can't remember my apple security answers and I can't seem to change the either?

    Hello I can't remember my apple security answers and I can't seem to change the either?

    If you still have problem, call Apple to help reset your Security Question.
    http://support.apple.com/kb/HT5699

  • Is there a way to Change the Writing Speed When Burning CD-R's?

    Is there a way to change the writing speed when burning CD-R's?
    I don't see any options in Disk Utility.
    Rob
    P.S. Since I am burning coasters lately with the Pioneer DVR-111D, I though that I might solve the problem by using a lower write speed.

    I dn't believe so with Disk Utility although you can with Roxio Toast Titanium. I would try another media brand, like Verbatim, as a first step and see if the coaster problem goes away.

  • How can I do to change the web site when I open a new tab.

    Dear Friends...
    I cant find information, how to changes the web site when I open a second tab. Example: when I open Firefox my home page is google and that is perfect but when I open a second tab, why appears yahoo as home page? I want to changes that and I cant find how to do it . Thanks

    The normal behavior is to open a blank tab, an add-on will be causing it to display Yahoo. One add-on that does this is the freeze net assistant, if you have that one you can uninstall it and it should revert to opening a blank tab.
    There are add-ons that let you specify what should open in a new tab, such as:
    * NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
    * New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
    Another way of opening the home page in a new tab is to middle click on the home button in the navigation toolbar.

  • Can't seem to flip the landscape view when in email

    When my wife uses her ipad, the email shows in portrait and landscape BUT we have a keyboard and the landscape view needs to be flipped 180....all other apps seem to do this...any ideas?

    Hi Stan, thanks for the quick reply, I took your advice and did the build as an image and then burned the project at the recommended write speeds in Toast Titanium (10.0.9). The first burn was at 4x and the second was at 2x BD (an option in Toast) both speeds gave me the same result. It solved the issue with the freezing during disc playback, however, when I tried to navigate from chapter to chapter the disc, once again, freezes. Additionally, although it doesn't freeze during playback as with my previous burns, there's still slight skip at the same positions where there used to be a freeze.
    I'd be content at this point with the slight skip, but it's been one issue after another with these BluRay authoring projects. This is my first project switching from FCP and I've burned 11 Bluray discs on this project and still don't have a deliverable project that I can give to my client. Not what I was expecting from Encore. Any help would be greatly appreciated.

  • Can java web applet change the mouse speed?

    can a java applet
    using the browser hange the speed of the mouse
    like in the SystemParametersInfo API
    or can java use windows api at all?

    so the applet will have to include a dll
    another question can java move mouse cursor without dll's
    i mean an applet
    if not
    do u have any suggestion for a web based sulotion that can move mouse cursor and read mouse position without installing 3rd party plugins dll's exes in user system if there isn't any
    i want the best sulotion that does need thid party but is less invasive or more supported in most computers
    thx
    ( sorry for bad grammer )

  • Can't seem to change the permissions on an external hard drive

    HEELLLLPPP! We have a Western Digital terabyte hard drive that we initially set up on our Mac. We backed up both my husband's and my iTunes libraries to this hard drive from our individual work PCs, and reconnected to the Mac to do some duplicate file clean up. . . only the durn Drive seems to have it's permissions now locked as read only. Is there a way to re-set the Western Digital permissions on the Mac so that we can truly clean up and delete all duplicate files? We both just spent a combined effort of about 25 hours in iTunes deleting (we THOUGHT) almost 25 gig of duplicates, but when they didn't delete from the hard drive. . .
    Repair of this drive in Disk Utility is not available (all options grayed out), we have re-hooked it up to our windows PCs and reset file attributes, security, etc. and given "Full Control" to all users, and it still shows up as Read Only on the Mac.
    Anybody have any ideas?

    Select the drive in the Finder and choose Get Info from the File menu; if it is listed as being in the Windows NT Filesystem, install a software package such as this one onto the Mac.
    (26308)

  • How do I enlarge the font in messages received and sent?  I have it set at "13", but it is very, very small on my screen.  I can't seem to change the appearance of the tool bar even when I try to "customize".

    How do I enlarge the font in messages received and sent?  I have the font set at "13", but the appearance on my screen is very, very small.  When I try to "customize the toolbar" to look like the tool bar above this message, I am unable to do so.  Please advise.  Thank you.

    Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
    I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
    Thanks for your help!

  • How do you change the burn speed when making a CD?

    I have tried burning my iTunes purchases onto a CD, and when I try to play them back on my CD player, nothing happens. It will play back in iTunes on the Mac, but not on my CD player or in my car.
    I suspect it has to do with the speed at which they burn, but I have no idea how to change that?

    Check your similar post
    https://discussions.apple.com/message/18603508#18603508

  • I can't seem to change my ringtone, any suggestions?

    I just received a refurbished iPhone 3GS and everything seems to work great except I can't seem to change the ring tone.  I select a different ring tone and it shows it as the ringtone selected but when I receive a call, it always plays the same ring tone, one I never selected.  Is there any tricks to get it to accept the changes I make to the ring tone?

    Have you updated to iOS 4.3.2?  Have you tried setting a unique ringtone for one of your contacts to see if that works?

Maybe you are looking for