I can't seem to drag and drop files between my hardrives?
They are both formatted MS-DOS (FAT), I can only drag and drop from the hardrives to the desktop not the other way around or between the two? Thanks
blake1993 wrote:
Thankyou, I go between a microsoft and mac and was told that this format would work for that, what format would you suggest?
This depends on what you mean, can you provide more detail when you say, "I go between a microsoft and mac"? Please be descriptive so I can't leave anything up to assumption.
Similar Messages
-
How to drag and drop files between two JFileChooser
Sir i want to drag and drop files between two JFileChooser i don't know how to do that. So is there any reference code for that so that i can able to do it. I have enabled setDragEnabled(true) for both the jfilechooser now i don't now how to drop files in them means drag file from one jfilechooser and drop it to another JFileChooser,.
Plz help me this is the requirement in my project.Note: This thread was originally posted in the [New To Java|http://forums.sun.com/forum.jspa?forumID=54] forum, but moved to this forum for closer topic alignment.
-
Before the Yosemite update. I'm pretty sure I could just drag and drop documents in and out of folders. Now, I can't seem to do that, though the option still exists if i log into iCloud in my browser or even my iOS device. This seems odd to me. Am I missing something?
Where did you recall doing this?
Essentially all file movement is done in Finder, not Pages.
Peter -
Hello, I've been working on Premiere for a year now
I installed 2014 a week ago, and until today I haven't had any problems.
When I drag and drop the first video, everything works fine, until I try to drop another video.
The second video won't appear on the timeline, except for it's audio
Which is weird to me because everything worked well on the CS6
My sequence settings are
Custom
30 frames/second
16/9
sample rate : 44100Hz
quickTime
+H.264
The first video's properties:
Type: MPEG Movie
File Size: 576,0 MB
Image Size: 1920 x 1080
Frame Rate: 30,00
Source Audio Format: 44100 Hz - compressed - Mono
Project Audio Format: 44100 Hz - 32 bit floating point - Mono
Total Duration: 00:04:41:28
Pixel Aspect Ratio: 1,0
The second video's properties:
Type: MPEG Movie
File Size: 583,1 MB
Image Size: 1920 x 1080
Frame Rate: 29,97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:45:15
Pixel Aspect Ratio: 1,0
(it's a .MTS)
What is weird, too, is that when I added the first video, I couldn't add it "Again", the same thing happened
Any help? I need to finish the project by tonight :/My QuickTime version is the 10.4 (no idea if it's the latest one)
What do you mean by my system properties ? My mac ? If so then its a 16Gb 1600MHz DDR3 + Nvidia Geforce GT 750M 1024MB, an OS X Yosemite version 10.10
"What happens when you import the files onto a non-quicktime sequence?", well I don't know how to create a sequence before dragging a file on the timeline on this premiere, so I dragged the "Second video" first and it created a sequence with AVC Intra 100 1080i
29,97 frames/second
preview file format AVC-intra class100 1080i
what's weird is that I could add the second video once, but not twice, and I can add the "first" video several times (it's weird because the sequence was created from the second video's properties)
To answer your last question, the same thing happens too. I can create another sequence with the "Second video", add the "First video" 10 times but I won't be able to add the second video a second time.
On the other hand, when i created another sequence with the "first video", I will be able to add the first video as much as I want, but I won't even be able to add the "second" video once. -
I created some ringtones and managed to get them into the tones section of my library on itunes. I can see and play them. However, when I try to drag and drop them into the tones library on my iphone it will let me drag them but not drop them in. Does anyone know what I'm doing wrong? Thanks for any help
Email it to yourself, then save the file and then see if you can convert it to MP3.
-
How do I drag and drop files between computers when using Home Sharing in ITunes?
How can I drag music files between computers while using Home Sharing? An older version of ITunes had a Home Sharing icon in the column browser near the playlist so it was easy to drag and drop.
Hello cacalenni,
Thanks for using the Apple Support Communities. I understand that you wish to learn how to import songs using Home Sharing in the new iTunes. The following resource should assist you in doing so:
iTunes 12 for Mac: Use Home Sharing to import items from another iTunes library
http://support.apple.com/kb/PH19614
Cheers,
Matt M. -
Can't seem to drag and drop music files from iTunes to AE CS4 on Mac Pro...
...any suggestions?
Thanks for the quick response Sebastian.
Yeah, I know I can find the file in finder, but I used to be able to organize all my files in the iTunes interface and easily drag them to my project in AE CS3... so much more convenient.
I tried .aif and .wav files, all formats that AE accepts. Like I mentioned, I used to do this with AE CS3 and my Windows OS... I was just wondering if this was a Mac bug or something. Not the end of the world, but it's little things like this I waste half a day on trying to figure out!! lol. -
Can't drag and drop files between spaces in lion osx
since upgrading to lion osx, i've noticed that i can't drag a pic, for example, from safari and drop it into a chat box in ichat. used to drag pics, web addresses, text, etc across spaces all the time in snow leopard but i don't seem to be able to do it in lion. does anyone else have this problem or am i missing something?
You have many issues with your and your wife's machine(s). Everything you've posted works here. Reinstall Snow Leopard, repair permissions, and see if that fixes things.
-
How to drag and drop file between maximized windows in Awesome WM ?
Hello,
I am newbie to awesome WM. I am a web developer and usually need to edit files after downloading from FTP. I am using filezilla for FTP and sulblime text 2 for coding.
How can I drag file from filezilla and drop into sublime window for editing when both windows are maximized? Is it possible? Same way sometimes I also need to drag file from nautilus to filezilla for uploading to FTP server?
I would be thankful if somebody can guide me to make it possible.
Thanks.Belgarath wrote:
I have a similar problem in FLuxbox.
I can not drag a file from Thunar to any aplication.
I can "half solve" this problem in this manner:
Drag a file from a ubication, press ALT + TAB to switch between programs and then drop it inside.
My problem is that Fluxbox not change from one window to another when you put a file over the taskbar. I do not know if Awesome WM can switch between applications using ALT + Tab but it is the idea.
Luck with it.
No awesome wm can't switch between applications when file is dragged using ALT + Tab or MOD4 + Tab and that's the problem. -
Mac: can I drag and drop files from Finder into Files panel
I am relatively new to Mac so forgive me if this is obvious.
I just switched from Windows to Mac and now something I used to
know how to do in Windows I can't figure out how to do on Mac. In
Windows I used to open an Explorer window over Dreamweaver, select
some files, and drap and drop them into the Files panel in
Dreamweaver, and they would be sucked in.
Now on the Mac whenever I select the Finder window to select
files to drag and drop, the Dreamweaver panels disappear
completely, rather than just move beneath the Finder window. So
when I'm ready to drag and drop there's no Dreamweaver to drop
into. I see that if I put focus on Dreamweaver, then Finder won't
disappear, and I can click on Finder to begin a drag without
Dreamweaver disappearing but then it is unresponsive to a drop.
In short, I can't seem to drag and drop files from Finder
into Dreamweaver on the Mac. Am I missing something? I'm using
Dreamweaver CS3 on Leopard if that makes any difference.
Thanks,
JanI don't believe you can do this on the Mac platform. The only
other thing you could try is to use Spaces and have the Finder open
in one Space and then drag it over to Dreamweaver in another space.
Outside of that I can't think of how this would work. -
Why can I no longer drag and drop in iMovie 11?
Why can I no longer drag and drop in iMovie 11? This means I can't select transitions, titles, or even move clips within the project. Never had this problem before.
Serious bugs in iM 11 with numerous lock-ups and crashes. I shouldn't have upgraded -- now I'm pulling out my hair trying to complete a video project with it.
Apple is losing their way. -
Why Can I no longer drag and drop songs into Itunes playlists?
Why can I no longer drag and drop songs into itunes playlists. Was working fine then just stopped???
found solution, thanx everyone
-
I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?
Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives? -
I can't drag and drop files...
Hello!
Out of nowhere, I can no longer drag and drop files on my desktop or within my Finder windows. I also cannot drag pictures from Safari onto my Desktop. I do not think there is a problem with my Trackpad as I can still move Safari windows and the like around the screen. I am using an Intel-based Mac Book Pro with OS X 10.5.8 Any help would be amazing and much appreciated. Thank you!I'm having the same issue. I can no longer drag images from Safari (5.1.2) to Finder. I am on Lion (10.7.2). Has anybody found a fix for this? Having to right-click and "Save As..." makes me feel like I'm working in Windows XP, which is, needless to say, he11 of an unbearable kind.
-
Can't drag and drop files into Attachments while in Administrator mode
I can drag and drop files into attachment easily when I'm not in Administrator mode. But I need to be in Administrator mode at work and therefore for some reason I cannot drag and drop files into attachments; I'm forced to manually search and select particular files for attaching, which significantly slows my day-to-day work.
Is it a bug?
I have the up-to-date version of Thunderbird and I use MS Windows 7 Ultimate.
Any help would be highly appreciated.
ThxTo diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.
Maybe you are looking for
-
my daughter has a ipod touch now i need to add a ipod shuffle i have no idea how to get started can i use the same account i can't even figure out how to sync it HELP
-
Display Full Name in SharePoint Designer Workflow Email
Hi! I want to Display Full Name of a User value from "Assigned to" column... When I use lookup on "Assigned to" column I get domain/username instead I want to display John Smith (Full Name)... Is there a way to do that within SharePoint D
-
Hi all, While troubleshooting a load failure for a country, we were looking for the master files in UNIX for that country. But when we look in the directory for the country's master file in UNIX, we see the CSV file, but no files for the attributes.
-
I went to the Cerritos store tonight looking for a "RCA to USB connector" and was told by the sales person in Home Theater that "no such product exists". When I got home, I went to Amazon.com and bought one for $3.50 plus $.50 shipping. Now, why is i
-
Error during Usage Decision - Not All Physical Samples are valuated
Hi, I am using Sampling Procedure as follows: Sampling Type : Fixed Sample Valuation Mode : Attributive Inspection nonconf. Units Inspection Points : Sample Management I have assigned the Inspection Point as 200 and Sample Drawing Procdure in