I can't seem to get Firefox to update on my Linux Mint system???

First I have to say I'm a little tech challenged. I can't seem to get my Firefox to update to the latest version. I've tried the Help page and done the fixes to no avail. I also downloaded the latest version but my computer will not seem to do anything with it. My Linux Mint is currently up to date.
My Firefox does crash occasionally and I wind up having to shut the computer down manually. Linux restarts fine but sometimes it takes two or three tries to get Firefox up without crashing again...
Thanks

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Similar Messages

  • I can't seem to get Firefox to open links in Thunderbird, for ex. and when checking defauts, it doesn't show up in my standard user profile (Win7)

    I've tried a few browsers, but want to go back to only Firefox as default browser. I can find it and allocate it in the Administrator profile, but not my daily use, standard user. It doesn't even appear in the list of programs to assign defaults.
    And when I click on a web link (in Thunderbird, for ex.) I have to copy and paste it in Firefox to go to the page.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

  • I can't seem to get firefox to open a new blank window by going to the menu or doing "comand n" is there a setting disableing new windows?

    also when i click a link on an email in thunderbird nothing happens and when i try to rip a tab off to make its own window it disapears.

    You can inspect and adjust the browser.link.open_newwindow prefs on the about:config page.
    * http://kb.mozillazine.org/browser.link.open_newwindow (1)
    * http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0 or 2)
    *http://kb.mozillazine.org/about:config

  • I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

  • I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can't seem to get rid of this BING any suggestions?

    I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can’t seem to get rid of this BING any suggestions on getting rid of it and getting back to Google?

    Hello
    I did remove Bing from the drop down menu, but it is still in Firefox as main search engine. I also did a back up and restore. Nothing has worked so far. I read a post that people were able to delete Bing from Explorer. I guess using Explorer will be my last resort.

  • I can't seem to get the iTS to update the description of my podcast, nor refresh to show new episodes?

    I recently launched a podcast series (http://itunes.apple.com/ca/podcast/notes-from-northwest-passage/id449063851) but its still showing an older description text with some typos and an incorrect link in it, as I registered it with a pre-edited file so it would be in line for review while I finalized the details, and now I can't seem to get it to refresh and show the new texts at all, even though I edited the description texts in the xml file well over 2-3 weeks ago.
    I've tried redoing this file several times.  It always validates but changes never get picked up by the iTunes store.I can manually subscribe to the feed using iTunes' advanced menu, with no problems. The feed is at:
    http://a4.g.akamai.net/7/4/66750/v1/smb2.download.akamai.com/66750/http/podcasts /archaeology2011/arcticarchaeology2011_eng.xml
    I recently (about 3-4 days ago) tried redirecting the feed to a new version of the xml file stored in a new folder, just to see if that would somehow jolt it back into reading it, but again after 3-4 days it hasn't done anything.
    It's also not showing any of the most recent episodes even though they have all been there about a week, so the store should have picked them up by now, no?
    Any suggestions?

    If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
    <pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
    You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
    It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

  • I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.  I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

    I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.
    I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
    I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
    Is there anyone who can give me some pointers ?

    Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
    For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
    To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
    At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
    Good luck!

  • HT3500 I have a MacBook Pro and an HP ENVY 110 SERIES All-In-One .  I can't seem to get a network set up or either one to locate or connect to the other one.

    I've spent hours, actually probably days, trying to do this but it's not working. I've had the ENVY since Nov
    and have not been able to print - much less do anything else with it.
    My internet is CLEAR wireless. I use the little USB 4G Mobil Modem. This new HP ENVY is also wireless.
    I know I can't be online and print at the same time unless I get a router.
    I also know that I can go offline and change the network pref  to "airport" so I can print. Meaning I'll have to change
    back and forth but for my uses,  that's ok..at least for right now.
    What I can't seem to get set-up correctly is my own local network.
    I'm pretty sure it's suppose to be done using "Airport".
    Obviously, I'm doing something wrong in establishing my network.
    The printer is listed on my printer preferences and shown as  "offline"  "default". I assume that means the ENVY
    is my default printer.  Great! At least my Pro knows it's suppose to connect to the ENVY once everything's set-up correctly.
    Now, if someone could just tell me exactly, step-by-step what to do to get that done....
    I'd be soooo very happy!
    Thank you!
    Ricki

    Well... no help was found here.. so I abandoned the wireless- ness of my printer.  I bought a
    small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
    and any kind of printer.   I also bought a long USB cable.  I now print--wired since this can be done
    as an alternative to wireless with this printer.   Because I don't want a cable "hanging around"
    when the printer is not in use, I simple disconnect it and reconnect when I want to print.
    It's a temporary solution others may find helpful as well. Apparently there's been a lot of
    confusion and problems getting this printer set up wirelessly with our MacBooks.
    Shame on HP for not helping us out!

  • I have an ipod touch and it is locked and i can't seem to get into it. what can i do to unlock it?

    i have an ipod touch and it is locked and i can't seem to get into it. what can i do to unlock it?

    You have to input your Apple ID in the prompt when it pops up

  • I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I have powerpoint for Mac on my imac.  I can't seem to get the active text box function to work like it did on my PC.  How can I insert an active textbox into a presentation that will allow me to type while presenting?

    I've gotten a little further on this. The dynamic select is
    working fine. It's the "a href" code that isn't. I'm wondering if
    someone can look at this line and tell me if it's okay to build the
    query string this way. The storeid comes through fine but I'm still
    not getting the employeeid value to pass. Here's line that's not
    working:
    td><a href="registerStoreCust.php?storeid=<?php echo
    $row_storeRS['storeid']; echo "&employeeid="; echo
    $_GET['employeeLM']; ?>">Register
    Customer</a></td>

  • I can't seem to get GB to recognize my Behringer X1222 USB Mixer. It will record, but shouldn't I be able to see and/or select which input channel(s) that I will record from? Can I record more than one channel at a time, and record multi tracks?

    I can't seem to get GarageBand to recognize my Behringer X1222 USB Mixer. It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer. Can't find any drivers from Behringer. How do I getGB to "see" the mixer? Thanks, I'm a newbie to Macs in genreal, and recording...

    viiram wrote:
    It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer.
    the x1222 includes a 2 channel audio interface, 2 channels are all you can get from it.
    the most you can do is record to 2 tracks at a time; skim this tute to see how:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Help

    On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Is that even a thing? Is there another app I can download to have access to my contacts with imessage?

    That comes with iOS 5 (Settings>General>About>Version) and only the 3G abd later iPods can go to iOS 5 or later
    Identifying iPod models

  • HT201365 Just dowloaded the new ios 7, and i can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a Blue circle spin and spin for over 5 or 10 min. without nothing happening! Help !!!

    Just downloaded the new ios 7, and I can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a blue circle spin and spin for over 5 min. without nothing happening! Help!!!

    Hi,
    This is how App Store app shows now when an app is downloading. If you cannot download anything, go to Settings > iTunes & App Store, remove your Apple ID, and set it again. That should work.
    Hope that helps.

  • HT4623 I can't seem to get my keypad shortcuts to work on my iphone 4 after the ios6 update.  Anyone have a fix for this??  Apple???

    I can't seem to get my keypad shortcuts to work on my iphone 4 after the IOS 6 update.  Anyone have a resolution for this???  Apple???

    Unless Verizon has a special provision in this regard that ATT has never had, Apple handles all iPhone repairs and exchanges under Apple's warranty.
    There is a setting when capturing photos - Automatic, On, or Off for the flash when capturing photos.
    If there is no flash when set to On or Automatic in a dark setting and no change after the standard troubleshooting steps which in order are:
    Power your iPhone off and on.
    An iPhone reset.
    Restoring your iPhone with iTunes from the backup.
    Restoring your iPhone with iTunes as a new iPhone or not from the backup.
    Your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby.

  • I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV.  Is this a design flaw?  Or is it me?  My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

    This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
    http://support.apple.com/kb/HT1454

Maybe you are looking for

  • Issued Vendor wise stock Report - Standard

    Dear All, We are using Subcontracting method in materials management. Scenario - We indent materials from me51n and place the Material Purchase Order and then Receive the materials which come into the stock at GNST with movement type 101 and then we

  • No Audio for Flash Videos in Any Browser

    I'm running Windows 7 Ultimate 64 bit with Service Pack 1 which is a 64-bit OS. I can play videos in all browsers (IE, Firefox, Chrome, and Opera) but do not hear any audio that use Flash.  Videos that use Apple's Quicktime work perfectly with audio

  • Good Siebel Opening in a CMM level 5 co

    1. Siebel EAI Developer • 4-6 years experience in Siebel EAI development, • hands on expertise with inbound and outbound web services, middleware, transport protocols, scripting, configuration, integration objects, VBC's, EBC's, having been through e

  • How much Creative Cloud storage comes with Student and Teacher Edition?

    Hi! I work for the art college called the Maryland Institute College of Art, and I was recently asked a question that I don't have the answer for. Basically, I'm wondering why my (and the student who asked me) only show 2 GBs of possible storage in o

  • Does Mail have template for email newsletter?

    I see that Mail has templates for cool emails, but is there a way to have an newsletter template that you can just fill in, has columns, etc., and then you just Send it out to your recipients? Does Pages have this feature? Thanks.