I can't seem to get my iphone to update any higher.

i did three updates on my itunes its at the lastest version 10.4 but my device is still at 3.1.3 and all the apps that i want to use require at leat 3.2 or 4.0 anyone have any ideas on how to update it? i've tried checkign everywhere. and i don't knwo what's wrong with it. i had to do a restart becae the wifi wasn't working. the restore fixed that. but now i can't get it to upate any higher but the ituens is at the highest but the phone isn't goign up. help! it says that the ipod has the lateset update at 3.1.3
i'm not sure what kind of iphone it is.. it's got a silver back. (it was a birthday present) it came with no box or anyhting jsut the phone. i use it mainly for the apps on wifi and as an ipod.

If your iPhone Has this back then you have the first iPhone which can only go up to 3.1.3

Similar Messages

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Just noticed the same problem. I was able to do it before updating. Hope there's a simple answer. That is a big reason why I got the iPad and iBooks.

I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can't seem to get rid of this BING any suggestions?

I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can’t seem to get rid of this BING any suggestions on getting rid of it and getting back to Google?

Hello
I did remove Bing from the drop down menu, but it is still in Firefox as main search engine. I also did a back up and restore. Nothing has worked so far. I read a post that people were able to delete Bing from Explorer. I guess using Explorer will be my last resort.

I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?

I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?

If I go through the setup that you suggested, won't I screw up the existing software on my system?
No. The iTunes installer will first uninstall the existing version of iTunes and then put in the new one. (That's actually also what happens when you use Apple Software Update to install a new version ... it just doesn't show the uninstall phase like the iTunes64Setup.exe or iTunesSetup.exe does.)

I can't seem to get the iTS to update the description of my podcast, nor refresh to show new episodes?

I recently launched a podcast series (http://itunes.apple.com/ca/podcast/notes-from-northwest-passage/id449063851) but its still showing an older description text with some typos and an incorrect link in it, as I registered it with a pre-edited file so it would be in line for review while I finalized the details, and now I can't seem to get it to refresh and show the new texts at all, even though I edited the description texts in the xml file well over 2-3 weeks ago.
I've tried redoing this file several times. It always validates but changes never get picked up by the iTunes store.I can manually subscribe to the feed using iTunes' advanced menu, with no problems. The feed is at:
http://a4.g.akamai.net/7/4/66750/v1/smb2.download.akamai.com/66750/http/podcasts /archaeology2011/arcticarchaeology2011_eng.xml
I recently (about 3-4 days ago) tried redirecting the feed to a new version of the xml file stored in a new folder, just to see if that would somehow jolt it back into reading it, but again after 3-4 days it hasn't done anything.
It's also not showing any of the most recent episodes even though they have all been there about a week, so the store should have picked them up by now, no?
Any suggestions?

If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

I just subscribed to iTunes Match but I find my iPhone 4s is matched to the wrong Apple ID. iCloud is properly linked to the same Apple ID I registered for iTunes Match but I can't seem to get my iPhone to link Match to that ID.

How can I link iTunes Match to my proper Apple ID? I have two ID's and my phone accesses iCloud with the proper ID but it insists on trying to access iTunes Match using the wrong ID so I get the message that I'm not registered for iTunes Match.

The iCloud and iTunes Store account ID are not the same thing. They can be different although some folks, like myself, do have the same Apple ID for all the Apple services. Go to Settings > Store and enter the exact same iTunes Store account ID you used to purchase iTunes Match. Be aware you can only switch Apple IDs on an iOS device every 90 days.

TS3999 my ical will update my calendar on my phone, but I can't seem to get my phone to update my ical on mac

Even when I plug my iphone in my mac, it isn't syncing my calendar with my ical on my mac

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

I can't seem to get Firefox to update on my Linux Mint system???

First I have to say I'm a little tech challenged. I can't seem to get my Firefox to update to the latest version. I've tried the Help page and done the fixes to no avail. I also downloaded the latest version but my computer will not seem to do anything with it. My Linux Mint is currently up to date.
My Firefox does crash occasionally and I wind up having to shut the computer down manually. Linux restarts fine but sometimes it takes two or three tries to get Firefox up without crashing again...
Thanks

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

HT4623 I can't seem to get my keypad shortcuts to work on my iphone 4 after the ios6 update. Anyone have a fix for this?? Apple???

I can't seem to get my keypad shortcuts to work on my iphone 4 after the IOS 6 update. Anyone have a resolution for this??? Apple???

Unless Verizon has a special provision in this regard that ATT has never had, Apple handles all iPhone repairs and exchanges under Apple's warranty.
There is a setting when capturing photos - Automatic, On, or Off for the flash when capturing photos.
If there is no flash when set to On or Automatic in a dark setting and no change after the standard troubleshooting steps which in order are:
Power your iPhone off and on.
An iPhone reset.
Restoring your iPhone with iTunes from the backup.
Restoring your iPhone with iTunes as a new iPhone or not from the backup.
Your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby.

TS3992 Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting iPhone backup could not be complete th

Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting the same message " iPhone backup could not be completed" -what dies that mean.?

Hi,
I was facing issues with both backup and FB integration after the iOs 6 upgrade. Before then I did not have any issues with the iCloud backup service, but after a few days, I noticed that it was continually stuck at the Estimating time for the backup and it never progressed.
As any good techie would, I tackled the most pressing issue first . . . FB integration of course.
I had read in a separate post about this solution so tried it . . .
I deleted the original FB app and hard booted the phone. I then went into settings and entered the data for FB integration. Seconds later, I received a text message to my phone - already listed and verified in FB with a 6 digit code to re-enter instead of my password. Seconds later I was verified and then prompted to download the FB app. All backup and integrated.
Then I went into the iCloud backup, turned it off . . . and deleted the last backup. I then re-enabled backup . . . and although I thought I was going to face the same issue, after a few minutes, it moved on from Estimating time . . . to actually backing up. It is now a small way through the backup and seems to estimate that it will take another two hours to complete.
A good nights work. Backup and integration all sewed up. Good luck.
Cheers
Ian

Ok I can't seem to get my apps,music, or photos from my iCloud from when I first setup iCloud on a iPhone 4. How do I get my things back from the iCloud and get them to my new device?

Ok I can't seem to get my apps,music, or photos from my iCloud from when I first setup iCloud on a iPhone 4. How do I get my things back from the iCloud and get them to my new device?

If you no longer have the phone or have any Backup of it at all, you can re-download your apps and your content from the iTunes Store by logging into your Apple ID at settings> iTunes & App Store. Unfortunately you can no longer recover the data that was associated with those apps.
So far as your photos go, you can recover any photos that were in photo stream and taken less than 30 days ago by logging in with your Apple ID to settings> iCloud> photos. Unfortunately you will be unable to recover any photos from your camera roll.

HT204291 I can't seem to get AirPlay to work on my iPads, works fine on my iPhones on the same network, any suggestions?

I can't seem to get AirPlay to work on my iPad's, it works fine on my iPhone 5's on the same network, any suggestions?

http://whirlpool.net.au/wiki/three_email
Have you tried contacting your ISP for support? Can you confirm that the email is suppose to be over Port 110 and not 143, or 995/993?

HT4528 I can't seem to sync my iPhone with iTunes. I keep getting this message: iTunes could not connect to the iPhone because an error occurred while reading from this device. What can I do?

I can't seem to sync my iPhone to my computer; I keep getting this message: "iTunes could not connect to the iPhone because an error occurred while reading from this device." I get the same message with my iPad, even though they all share the same account. What can I do?

This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743

I can't seem to get my iphone to update any higher.

Similar Messages

Maybe you are looking for