I can't seem to make my led light/flash work on my iphone 4
I recently purchage a flashlight app for my iphone 4 and discovered that my led light/flash was not working. In the flashlight mode I could not get the led to work. I later found out the flash in the camera mode also didnot function. I'm wondering is there a defect in the led/flash or is there a setting that I have omitted on the ipone itself. I'm going to take the phone in to the local Verision store for evaluation and possible exchange.
Unless Verizon has a special provision in this regard that ATT has never had, Apple handles all iPhone repairs and exchanges under Apple's warranty.
There is a setting when capturing photos - Automatic, On, or Off for the flash when capturing photos.
If there is no flash when set to On or Automatic in a dark setting and no change after the standard troubleshooting steps which in order are:
Power your iPhone off and on.
An iPhone reset.
Restoring your iPhone with iTunes from the backup.
Restoring your iPhone with iTunes as a new iPhone or not from the backup.
Your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby.
Similar Messages
-
I can't seem to get my keypad shortcuts to work on my iphone 4 after the IOS 6 update. Anyone have a resolution for this??? Apple???
Unless Verizon has a special provision in this regard that ATT has never had, Apple handles all iPhone repairs and exchanges under Apple's warranty.
There is a setting when capturing photos - Automatic, On, or Off for the flash when capturing photos.
If there is no flash when set to On or Automatic in a dark setting and no change after the standard troubleshooting steps which in order are:
Power your iPhone off and on.
An iPhone reset.
Restoring your iPhone with iTunes from the backup.
Restoring your iPhone with iTunes as a new iPhone or not from the backup.
Your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby. -
I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.
OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options -
hy, does anyone know why my computer doesn't recognise my iphone? I can't seem to make it see the personal hot spot any suggestions? thanks
Did you update to iOS 7? If yes you need to update iTunes on your computer to iTunes 11.1
If you are using iTunes 11.0 and iOS 6.x then show the left sidebar in iTunes.
When in iTunes on your computer use the View menu to View Sidebar. The device should show up there when connected. -
HT204266 how do i turn the shuffle off? I can't seem to make it unshuffle my albums?
how do i turn the shuffle off? I can't seem to make it unshuffle my albums
On the left side of the music playing screen under the scrubber bar is the shuffle control icon. It is the arrowed racetrack. Tap the icon until it is white. See chapter 4 of the users guide;
iPod touch User Guide (For iOS 5.0 Software) -
I'd like to remove a thin line that is part of the page design in one of Aperture's photo books. I can't seem to make it happen. Any suggestions?
The mouse that came with my Mac does not have a right click feature. When I try to highlight and click, it just opens the link I don't want anymore. What I want to do is remove unwanted links from the top bar. For example, I no longer use GoodSearch or myEarthLink, but I can't delete them. There are also some links that never should have found their way up there, and I don't know how they ended up there, and I can't remove them either. I've read through a ton of questions and answers, and I can't find one that addresses the problem. With my Safari browser, all I have to do to remove an unwanted link is to click and drag it to the trash. It doesn't appear to work that way with Firefox, to my chagrin. I hope this better explains my question. Maybe that will give you a better insight into a solution.
-
even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold eddition.
Hi, Thilina66. You say you have entered the country code but still cannot make international calls. I suppose you are adding the international access code before the country code. This internaltional access code (011 in the US, 00 in Europe, etc.) can be substituted by adding a + sign before the country code.
For example, to call a number in the UK from the US you have to dial:
011 44 7540 267898
or
+44 7540 267898
To call a number in the US from the UK you have to dial:
00 1 212 456 1470
or
+1 212 456 1470
Please check that the contact number in your address book is correctly written if you are dialing directly from the address book or that you enter the correct numbers in the keyboard if you are dialing from the keyboard. -
I can't seem to make an actual phone call from my iPhone 4S. I dial the number, and the phone at the other end rings. But at my end there is nothing. No ringing. No person trying to talk to me. What is causing this problem? I have got all of the current updates loaded to my phone.
My brother had a similar problem and he went to the Apple store and they gave him a new one under warrenty...she said something about the arial, I would give it a go.
-
I have just downloaded the latest operating system onto my 4S. I now can't get notifications on Whatsapp or Viber. Message says to connect to itunes but I can't seem to make it work. Any suggestions?
You need iTunes version 11 for iOS 7.
iTunes version 11 requires OS X 10.6.8 or later...
Click on the Apple icon.. Top left in Finder...
> About this Mac > Version...what does it say? -
I have a generation 3 ipod 80 gig. When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it. I can't seem to make this work I have reset the ipod, reloaded itunes all to no effect. Any ideas?
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
How can i make two LEDs light on alternately?
hello .
i have a problem to make two LEDs light on alternately . i have one signal
input to a CASE that have may state on two LEDs..such as one case is one
LED on and other one is OFF.But one of my problem is one of my case is about
TWO LEDs need to light on alternately mode,what the way can do it ?pleaseHallo, Michael,
Du meintest am 15.12.99 zum Thema how can i make two LEDs light on alternately?:
> i have a problem to make two LEDs light on alternately . i have
> one signal input to a CASE that have may state on two LEDs..such as
> one case is one LED on and other one is OFF.But one of my problem
> is one of my case is about TWO LEDs need to light on alternately
> mode,what the way can do it ?please
Could you please list all the cases which you want to show? Could you list
them in a table?
Viele Gruesse!
Helmut -
i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?
What version do you have?
iPhoto menu -> About iphoto.
What goes to your iPad/iPhone is controlled in iTunes.
Regards
TD -
i can't seem to get my apps or music on my new iphone. all my contacts, pics, emails, etc. transferred, but can't get the apps/music
apps and music should be in your itunes media library, sync to itunes to get them back on your phone.
-
Is there an app I can download that will let my LED light change colors for like when it alerts u for a call or message?
On the iPhone 4, the LED cannot change color.
-
Front LED Light Flash Once Every 3 Seconds
As what I read from the previous post, the front LED light flash once every 3 seconds meant that rams were not installed. However, I can turn on the G5 (Tower) couple days ago. After I came back from vacation, it did not allow me to turn it on. In addition, I have already tried to reseat the ram, and it did not work. Any suggestion to fix this problem?
Hi Teddy, and a warm welcome to the forums!
After I came back from vacation, it did not allow me to turn it on.
If it was unplugged from the AC that could drain the PRAM Battery, 4 years is close to their lifespan...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
Maybe you are looking for
-
I have a report with two queries: The first query is grouped into 3 cols at the top of each page. The second query retrieves detail records that are printed on one or more pages (under the 3 columns of data) depending on the amount of detail records.
-
Error on the installation of Web Application Server Java 6.40 SP9 on my PC
Hi, All, I got the following error when I try to install Web Application Server Java 6.40 SP9 on my laptop using the CD that comes with the Book 'Java Programming with the SAP Web Application Server'. I'm currently using window XP. The installation
-
Garbage collector does not work any way
when you unload some loaded swf file (Loaded with Loader class) it's Event Listeners continue their jobs is there anyway to solve this problem for example please made three files l1.fla , l2.fla , main.fla in l1 creat a MovieClip with instance name "
-
Static methods in class accessed by jsp/servlet
I wanted to conceptually know ... If I have a class specifically doing some quering to database and giving results to jsp and servlet ... does this make sense? Static methods are ok ? Is it secure enough if I have all connection classes local to a me
-
Hi, I'm a labVIEW engineer with 6+ years of expertise in LabVIEW , LAb windows and Test Stand. I've completed the CLAD certification in LabVIEW. Currently im looking for a suitable job opening for me in Chennai / Bangalore. Please let me know if t