I can't seem to save a high resolution jpg. from a raw file?

I am trying to save a large resolution jpg. from a raw file. When I save as at the highest level its only saving the image at around 2mb ?

I am trying to upload a file to print on canvas in raw my photo is 30mb but when i try and save it thru photoshop as a jpg. Its so compressed the site wont even except it because the resolution is to low?  
Thanks for any ideas,
Tom Pytel
480-650-2495
Tom Pytel
480-650-2495

Similar Messages

  • Can we extract the "Save" preference info (resolution, JPG quality, etc.) from an existing PDF file?

    Hi,
    Is it possible to obtain *ALL* the save preference data from a PDF file with Adobe Reader alone?
    I'm referring to document resolution, but also what JPG quality and vector settings were used.
    Thanks!

    ridgeline50 wrote:
    I saw a thread that suggested using the sever version of Adobe Acrobat because its OCR engine performs better.
    There isn't a server version of Adobe Acrobat.

  • Can't seem to save non-English as text from PDF using Reader

    I have several PDF documents that were originally generated by OpenOffice from a UTF8-encoded text file. The text is in different languages, e.g. Korean, Arabic, Russian, English. When I open these documents and then "save as text", the resulting text files contain garbage or nothing at all in all cases except for English. Is it possible to extract non-English text from a PDF document using Reader? If not, is there a different product that could be used for this purpose? Thanks much!

    They're using fonts that you don't have on your system so no, it isn't possible with Reader.

  • Getting a high resolution image from a fla file

    I have the source to a fla file. I would like to get a still
    image from the video in in as high quality as possible so I can
    make a print. Playing the file I can zoom in quite a bit but the
    only way I can figure out how to get a still is a screen shot which
    is sub par quality. Any suggestions?

    Exporting Image Versions
    Select the Image.  "File➞Export➞Version".  Specify an Image Export Preset that is set to "Original Size".  If you use JPG, set quality to 10 or higher.
    Image Export Presets are set at "Aperture➞Presets➞Image Export ... ".

  • How do I convert a file located in my e-mail from PDF to Word.  I can't seem to save it in my word files.

    How do I convert a file located in my e-mail (that is secured) from PDF to Word.  I can't seem to save the PDF file anywhere.

    Hi williamf,
    For starters, please try triple-clicking in the Word document where you want to edit the text (sometimes, that's what it takes to select text in Word). If that doesn't work, I'd be interested in hearing more about the PDF file that you converted and the method that you used to convert it. For example, how was the PDF created (and by what app)? Did you convert via Adobe Reader (what version) or via the ExportPDF website?
    If you can tell us more about the file, we should be able to get to the bottom of things.
    Best,
    Sara

  • I am in New Zealand and when I type up a rather long email to send back home, the send button does not light up by the time I finish and I cannot send the email and can't seem to save the message or anything and then as soon as I touch a button, poof, gon

    Can anyone tell me why when I type a very long email, the send button is not highlighted anymore when I am done and I can't send the message? And I can't seem to save the message or anything and as soon as I touch a button, I lose the whole thing. Any suggestions?

    Have you tried typing and saving using Notes or word processing Apps before sending message?

  • My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page. I can't figure out the rename function either. Help?

    My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
    I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?

    Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.

  • I can't seem to make n actual phone call from my phone.  I dial the number, and at the other end it rings, and the person knows it is me trying to call... but on my end of the phone is nothing at all.  Why is that?

    I can't seem to make an actual phone call from my iPhone 4S.  I dial the number, and the phone at the other end rings.  But at my end there is nothing.  No ringing.  No person trying to talk to me.  What is causing this problem?  I have got all of the current updates loaded to my phone.

    My brother had a similar problem and he went to the Apple store and they gave him a new one under warrenty...she said something about the arial, I would give it a go.

  • Can not get the high resolution photo from iCloud on the iPhone5s, unless re-share the photo to the iCloud.

    after restoring the iPhone, the iPhone can not get the high resolution photo from album of iCloud, unless re-share all the photo to the iCloud.

    If you plug up both to computer, open itunes, click "back up to computer" on both (not necessary for the one that's being transferred to) then on the one that's sending data click "back up" in the iTunes menu. It will then back up (if not already done in sync). Now plug up the second one (being transferred to) and on the iTunes menu, click "restore from backup" then choose the device you just backed up, and click "ok" or what it says.
    Hope this helped
    P.S. I am referencing to using iTunes <11. Some features I show here might not be available in iTunes 10

  • Acquiring High resolution data from usb mouse movement

    Is there a way of acquiring high resolution data from the movement of a usb mouse?  I have a NI PCI 6221 daq card to use. I have a Pentium 4 PC with 1 Gb of RAM. I need to get the position, velocity and acceleration of the mouse.
    Is there a way to do it with the above hardware.
    Thanks in advance

    I don't see how you could use a PCI-6221 to get high resolution mouse movement measurements. The PCI-6221 can acquire voltages at up to 250kS/s, but what voltage would you measure? It could also read in digital data at 1MHz, but you would have to be able to understand the USB communication protocol your mouse uses, and I doubt that your mouse vendor will give out that information. You might be able to take your mouse apart and hook up leads to the sensors around the trackball and do a sort of quadrature encoder application, but there's no guarantee we're dealing with TTL digital signals here (you might even be using an optical mouse!).
    Your best option - and I have no idea how good this option is - is to use the driver already installed for your usb mouse. What software application are you going to use to program your application that will measure the mouse movements?
    If you would consider using LabVIEW, you could set up an event structure to capture mouse movements across the front panel. Each event registered includes a timestamp from the CPU's millisecond clock as well as the coordinates of the mouse. If you stored up a buffer of previous mouse positions and times, you could infer a velocity, perhaps with the help of interpolation functions.
    All of this would have somewhere on the level of millisecond timing accuracy. Were you envisioning something else?
    Jarrod S.
    National Instruments

  • In placing a high resolution jpg into InDesign some whites tended to gray out. Why?

    In placing a high resolution jpg into InDesign some whites tended to gray out. Why?

    Have you checked the whites in Photoshop and made sure they are all 255|255|255? Depending on the compression used, JPEGs can have artifacts in an otherwise white field like in the edges of this low quality jpeg:

  • Can photoshop convert .jpg to camera raw file?

    Can photoshop convert .jpg to camera raw file?

    And even if you could, it wouldn't be worth it.  Raw files are 12-bit (or more) with much higher dymanic range than jpegs.  The result is that (in the original raw file) you have flexibility to change white balance, change tone curve, recover detail from highlights and shadows in ways you can't with 8-bit (usually lossy-compressed) data in jpegs.  But having thrown that extra information away to create a jpeg, you can't get it back.  It would technically be possible to convert that jpeg data into raw format, but you would gain nothing by doing so and end up with a file much larger than the jpeg.  In fact if this theoretical conversion went the whole way to re-create a Bayer sensor array of data, you'd be throwing away resolution. 

  • Can we find the number of rows in table from the dump file

    Hi All,
    Can we find the number of rows in table from the dump file with out importing the table in to the database?
    Please let me know ,if any option is there.
    Thanks,
    Kumar.

    <s>Try to import with option SHOW=Y, that should skip the number of rows which are into a table from a dump file.</s><br>
    <br>
    Nicolas.<br>
    Oops, sorry, that doesn't show the number of lines...<br>
    Message was edited by: <br>
    N. Gasparotto

  • I could not make high resolution pdf from adobe indesign cs6

    I could not make high resolution pdf from indesign.
    Error code 0x00080148 is coming and indesign closes automatically.
    please solve my hiccup.
    thanks
    Lakshminarayanan G

    I could not make high resolution pdf from indesign.
    Error code 0x00080148 is coming and indesign closes automatically.
    please solve my hiccup.
    thanks
    Lakshminarayanan G

  • Photoshop CC can't seem to handle complex/high poly count 3D Models. Will this be addressed?

    Hello all,
    I am running Photoshop CC on 3 systems and having the relatively same problems on all. The source files are exported from ZBrush- .stl or .obj files that are complex and have high poly counts. The file sizes are into the hundreds of megabytes.  These are not the simple files like they show when people are using the 3D features- a racecar or simple toy rocket.
    Photoshop CC doesn't seem to be able to open all the files and even when it does, the structures facings or facets don't always appear correct. I've developed a partial workaround, by merging the objects and reducing the poly count (which creates a new set of problems).
    If I do get a file open, my ultimate goal is to be able to color it, add light it and render it for 2d print purposes. Again Photoshop seems to be picky- When I apply color via the airbrush tool, it usually isn't smooth. It seems to apply color by facet or facing. Same thing when I try to manually add in texture from another source file. It appears to make the detail jagged and blurry from the source file.
    The appeal of using Photoshop for this process is we have people here who can do it without too much of a learning curve. Otherwise everyone else has to learn ZBrush just to color and light the models.
    I've pretty much done all the troubleshooting I can and exhausted all the tools at hand. I have tried both texture painting and projections painting and all the other options. I believe the meshes are just too complicated. And if there is something incorrect in the file, such as a reversed normal, Photoshop doesn't seem to know how to deal with it. My systems have more than enough to handle the files.
    Does anyone have any similar issues and is Adobe working on them in the form of a new release?
    Thanks!

    Hi Everyone. Thank you for writing back. I have two 2011 imacs running intel 2.93 ghz, one with 20gb or ram and one with 16gb, both have 1tb hard drives, 1gb vram, one running os 10.6 the other 10.9. I have a 3rd computer, a PC  that notably handles the files more quickly, but still crashes if it doesn't like something from the original 3d model. This one has a 3.7ghz intel quadcore processor, 24gb of ram, 3tb hard drive, and a 4gb nvidia geforce video card, running Windows 8.1.
    So the reason I make the statement about Photoshop and not about my computers, is that all the above computers can handle the original files in zbrush. All the above computers can handle the files in meshlab. With ease. But when I get to photoshop, I face long load times, crashing, and a lag using the tools within the 3d space. And sometimes it handles the models differently than it does in any other 3d program. It seems picky for lack of a better word.
    When I say high poly count, I mean 4 million to 8 million. I am able to knock down the poly count in meshlab and that can help. But sometimes the files just don't want to open in Photoshop. 
    With all that said, it may be in something how some of the models were built, but again, Photoshop is the only one having an issue. And I have to add that I have been using Photoshop for 20 years and I absolutely love it. I am trying to make a case for my company to use it for coloring, lighting, and processing 3d models, but I just can't with the above issues.
    Any help would be greatly appreciated.
    Chris, if you need files, I can see about getting them to you. The only real issue is the work is highly proprietary and kept under wraps. So I would need to get approval and feel comfortable that is will be protected. Thanks!

Maybe you are looking for