I can't seem to switch security back on our Airport Express, without it disconnecting

Airport Express Security drop out

Connect by ethernet.. then do a factory reset.
Setup again with full security.
You might need to reset all the clients.
Remember to turn IPv6 to link-local if you use a Mac.

Similar Messages

  • Can I print from my iPhone/iPad via my Airport Express without my Mac being switched on?

    When I want to print on my home system I must have my Mac running on the network.  I prefer to have that switched off in the evening as I just use the iPhone /iPad from a separate building (within the extended network) but need to print! 
    Airport Express is set up .... Router -erthernet -> Airport Extreme -wireless -> A.Express (Extended)  --> ethernet -> to Brother MFC-9120CN.
    Is there a way to set that up without the need for a separate print server???
    Thanks

    Chances are, you have already tried this and already know the answer.
    But, if not....sorry, but no......since your printer is not AirPrint compatible, you must use the extra software workaround in the Mac.
    A newer AirPrint printer would allow you to do what you want.

  • HT201335 Can i use airplay with the apple tv and airport express without an internet connection? Basically Set it up as a closed network?

    I was told I could set a local network with the airport express, apple Tv, and my iPad to stream videos or pictures to a TV for a presentation.
    No internet connection is available at the location.
    Is that possible? Or do I need to access itunes homeshare with an internet connection to make this work?
    I've set it up at home where I have an internet connection and it works fine but I want to move the setup to my church for a class. The data I'm using is stored on my ipad.
    I know I can do this wired with the HDMI adapter but would like to do it wireless.
    Thanks for any help!

    Ok so we now have a solution to the problem.   A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped.  Fisrtly we plugged the airport express into my router using the ethernet cable  (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express.  In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned.  We also named the Airport Express with a distinguishable name.  We then waited for the changes to be registered then unplugged the Airport Express from the router.  I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name.  I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
    No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare. 
    Hope this helps.

  • How to switch video angle ? I can only seem to switch audio

    I created a 2 angle multiclip. I synchronized it using In-Points. Everything seems to work in the viewer (both angles advance in synch). I set Multiclip playback with unlimited RT and just RT.
    I can ealily switch the selected audio (green outline) but I can't seem to switch the video angle (the blue outline always stays on angle 1).
    I tried switching using the keyboard shortcut or buttons added to the button bar in my timeline. The green outline swtiches to angle 2 in the viewer even when I click the switch video angle button (same behavior as the switch audio to Angle 2 button or keyboard shortcut) then, when I click the switch video to angle 1 button, the green outline swtiches back to angle 1 (same as switch audio to angle 1).
    Finally, if I select the timeline and try to switch video to angle 2 the system beeps, but everything works great on the audio side in the timeline (easily switching from angle 1 to 2 and back to one using the audio switch button.
    I am using FCP 5.0.4.
    thanks in advance
    G5   Mac OS X (10.4.7)  
    G5   Mac OS X (10.4.7)  

    forget my previous post. I posted to the wrong group.
    Sorry

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • I've updated my phone and lost my music but I can't seem to sync it back on!!

    Please help me!! I've updated my phone and have lost all my music but I can't seem to sync it back on! An error message has popped up asking me if i'd risk losing my apps so I've clicked yes but nothing seems to be happening!!?? Helpp!! i need my music!!!

    problem solved! took me three hours some dental floss a tooth pick a fork and a quarter but i fixed it! so relieved!

  • The keyboard on my ipad has disappeared and I can't seem to get it back.Any ideas how to get my keyboard back?

    the keyboard on my ipad has disappeared and I can't seem to get it back.Any ideas how to get my keyboard back?

    Standard troubleshooting steps in order are as follows - checking after each one to see if the problem is resolved:
    Power your iPad off and on.
    A reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPad with iTunes from your iPad's backup.
    Restore your iPad with iTunes as a new iPad or not from your iPad's backup.

  • I purchased Adope Photoshop Extended and loaded onto my laptop.  I recently had to unintall all programs and can't seem to get Photoshop back on my computer.

    I purchased Adope Photoshop Extended and loaded onto my laptop.  I recently had to unintall all programs and can't seem to get Photoshop back on my computer.  I have the Serial number but can't figure out how to reinstall.

    I have the exact same question.  I have the serial number too.  I called Adobe help line, and they had a "technician" go into my computer and I thought he was going to reinstall.  He just showed me why the computer runs slow and why it didn't reinstall, and then told me if I still wanted his help it would be $300-$400.  !!  i thought it was a help line.... how does that help?  I didn't pay that much for the program!!
    I desperately need help with this!

  • Can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

    can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

    Theoretically yes. It will really depend on your situation. Please review the following Apple Support article to understand what is possible with the AirPort base stations and post back with any questions or help in setting up your extended network.

  • Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

    Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
    I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
    Thank you for your time.

    If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
    I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
    If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
    You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

  • How can I share my Internet from my iPhone to Airport express network?

    How can I share my Internet from my iPhone to Airport express network?

    YES you can! - Gotta love those "you can't" answers from people who haven't even tried. ;o)
    Just have your Airport Express "Join" your iPhone. It will share your Internet connection through its Ethernet port. I currently have an AppleTV connected via Ethernet to the Airport Express. With this setup I have wireless Ethernet AND wired LAN connection. I can even AirPlay to the AppleTV and have Internet at the same time. Haven't tried a switch/hub but see no reason why it wouldn't work. This proves to be very useful to create a wired network with Internet from a cellular device without Ethernet.

  • HT1218 can I use the 7.3 firmware on my airport express?

    can I use the 7.3 firmware on my airport express?
    current version 6.3, but de airport express units are not "supported" by airport utility v6. seems that they like me to upgrade firmware?

    Is it true that AIRPORT UTILITY V6 doesnt support this model?
    Yes
    However, you can use AirPort Utility 5.6 for Mac OS X Lion to configure the older Express.....and....your newer devices as well, so you might want to make that application your "go to" utility.
    Keep both AirPort Utility 5.6 and 6.x on your Mac.

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • How can I stream audio from Apple TV 2 to Airport Express speakers.

    how can I stream audio from Apple TV 2 to Airport Express speakers.
    I have LCD projector on one wall and connected ATV to it via HDMI.
    Speakers on the other wall and connected to APXpress.

    To be honest the times we've wanted to have music from more than one set of speakers, I've usually used my mac's iTunes library and controlled it either from the mac or from my phone, since they're not really the times we have any TV on anyway. I've tested AirTunes from the Apple TV but can't recall whether it worked with content from a streaming library.
    Now I've got something to do.

  • Can you share iTunes music w/Apple TV and Airport Express?

    Can you share iTunes music between Apple TV and Airport Express?
    I have been very happily using 2 Airport expresses to share my itunes library from my iMac to 2 other rooms. I just bought an Apple TV for the bedroom (and I ASSUMED to replace the Airport Express), and can not figure out any possible way to have the same music in 3 rooms any more.
    Anybody have any ideas?

    I think you may have misunderstood the OP, I believe they wish to be able to walk from room to room and listen to the same music over the tv and the express. itunes will send music to the tv and the express at the same time but in two different streams, so even if you chose the same music over each device it would be quite difficult to sync.

Maybe you are looking for

  • Can we include acrobat pro in browser?

    Hi all I used to use adobe reader to view PDFs, and IE and FF has adobe reader plugins to allow me to view PDFs in my browser. Now that I have installed acobat pro, my browser still open PDF files in adobe reader. Is there any way to include acrobat

  • Error code 6 when re-installing CS5

    I was running a student/ teacher edition of CS5.  After a clean install of Windows 7, I cannot reactivate CS5 after copying the files back to the computer's hard drive.  I get an error code 6 when I try to launch PhotoShop.   What do I need to do to

  • ORA-01882: timezone region  not found happens on LINUX only?

    Hi there... I trying to use JDeveloper under linux, and the problem I am having is there when I run the application I get the ORA-01882 error. According to the forum, I should set the timezone in the project properties using -Duser.timezone="+01:00"

  • Why has one page suddenly stopped working?

    we have a problem that has got our web developer stumped....and i'd really appreciate it if someone could shine some light on possible reasons. The page in question is the "Where to Buy" page which lists links to our suppliers. Its worked perfectly f

  • The technology behind PDF in V3.0

    Hello, I learned from Mark Swetz post (Re: PDF printing in v3.0 that the PDF feature will rely, to a degree yet to be determent, on a product called XML Publisher. As I'm not really familiar with the product I read about it a bit on OTN (http://www.o