I can't send email after iOS7 update...

I can't send email after the iOS7 update....this is a show stopper for me.   When is a fix expected?

First it would help if you explain exactly what happens when you send an email. 
Do you get an error message?
If so what does the message say?
The abilitly to send or receive emails does not fall on Apple or the IOS 7.
You email provider gives you that ability.
Double check and make sure your outgoing mail server is correct.

Similar Messages

  • Can not send emails after ML update

    I am unable to send emails after updating to Mountain Lion. Four email accounts, same problem: All settings are unchanged, but SMTP servers for outgoing mail are set as passive. No problem with incoming emails. Any suggestions?

    I thought they might be. Apple seems to forget about POP accounts, and most problems seem to occur in them.
    Do you have a backup before upgrading?
    Did Mail go through the upgrade process the first time you opened Mail after the installation? Sounds like something may have gone wrong.
    All mail accounts and emails are stored in you user/Library/Mail/V2 folder. If you have a time machine backup, just restore that V2 folder from before the upgrade (close Mail first) and see if that fixes the problem.
    To see your Library folder, click on the desktop to make it active, then go to the menu at the top, select Go, then Go to Folder and type or copy and paste
    ~/Library
    Then go to the Mail folder and open it and click on Time Machine - restore the V2 folder from before the backup

  • How can I send email after IPad update?

    email won't send, yesterday email worked fined then I updated IPad and iPhone 4 to OS 6.1.2. Now none of my email accounts will send . Any ideas?
    I did not change any settings.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Hi, I can't send email after installed maverick with mail

    hi, I can't send email after installed maverick with mail
    Thanks

    OS X Mail: Troubleshooting sending and receiving email messages

  • I can't send emails after updating my iphone 5 today, i'm with talktalk, i can recieve emails and my wifi is working fine

    I updated my iphone 5 today to ios7.1 and now i can't send emails. I can recieve mail, . I'm with Talktalk, and the wifi etc is working fine.
    the message i'm getting is The connection to the outgoing server 'smtp.talktalk.net' failed. I've tried turning my phone off and back on again but no change, Any suggestions? thanks

    Thanks Allan , I deleted and re installed my email account and it seems to have worked. Brilliant phew!

  • Can't send email after updating to iOS 6

    Apple update has made a useable and great device now useless. I use my iPad for work exchange email and now can't send or receive. Why release a product without checking for major bugs like this. Have had to delete all emails in outbox and constantly have to manually I close app to reset. Not happy apple!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Can't send email after 3.0 upgrade

    I can receive but not send email after the 3.0 upgrade. Also, the stock and weather buttons never update.
    Email is my important issue. Any ideas?

    Yeah, I put that in the title so hopefully people would see it right off the bat. I've been in the forum, looking at threads since the update to see if I'm the only one, and seem to be. I know tons of people are seeing problems with yahoo pushing email, but that's less of a concern to me at this point. And the fact that it worked just fine until this update tells me Apple broke it with their update. Surely I'm not the only person. And switching to gmail is not a good option for me. First of all, I hate gmail. Second of all, the sbcglobal account is my main mail account for my dsl line and I use it heavily. I don't want to switch. Shouldn't have to in my opinion.
    I was in the Promenade in Santa Monica earlier, was going to ask a "Genius", but the wait to see one was ridiculous. couldn't get an appointment till Monday. I'll wait till I'm back home to go the apple store I guess. It just frustrates me because I seriously doubt they can do anything at the store I haven't done already.

  • Cant send email after software update 10.0.10.85

    Email send and receive was working perfectly for early Z10 adopters at our company (SMTP / POP / IMAP, no BES). However, after the firmware update to version 10.0.10.85, sending email stopped working. In checking the logs on our email server, we found that our Z10's are correctly authorizing to the SMTP server but the connection then fails with an invalid linefeed error.
    According to our mailserver vendor (Ipswitch Imail), this has to do with  RFC 2822 Section 2 which specifically states that bare LF characters are not allowed. We are not experiencing the same problem with Gmail or AOLmail.
    Again, the Z10's did work with the initial firware release and failed after the firware update. Nothing was changed on our mail server in the meantime.
    Thanks in advance for any thoughts

    I see that K-9 Mail has recently become available on App World. On a lark, I decided to give it a try and guess what?... It works just fine. It receives and sends mail exactly the way any native email client should.
    I have an idea for you BlackBerry. Since you appear to be unable to resolve the mail sending issue, and since K-9 Mail is open source, why not download and incorporate their source code into your own mail client, (with proper attribution of course). It would save you the trouble of figuring out for yourselves what you broke in the last firmware update and we would get the fully functioning email we've all become accustomed to on our Blackberry devices.
    Ok, sarcasm off. Guys, I really want to love this phone and you know I'm pulling for you, but I can't send email from my Blackberry and right at the top of this thread is the reason why. If nothing else, a Blackberry MUST do email properly! Are you working on this? Throw us a bone here!

  • Can't send emails after installing 10.9

    After installing OS X v10.9 I can not send emails.  Nothing has changed on the server level.  But in the setting it keeps showing up with a TLS and does not have anything to select to make changes.  What should I do?

    Hello TeresaRob,
    We've a handy guide that can help get your messages sending again.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Cheers,
    Allen

  • Can't send emails after Mountain Lion update

    After I updated from Lion to Mountain Lion, I could receive messages from my service provider's account, but I could not send messages.  Mail Connection Doctor showed the information "Could not connect to SMTP server" for both SMTP servers, and when I try to send a message, I see that each SMTP server now has "(Offline)" after its name.  I can still send from my iPad to the same servers, and also from the service provider's webmail.  I have rebooted everything (Mac, wi-fi, router) to no avail, and I have followed all advice in Support articles such as TS3276.  I have changed absolutely no settings anywhere from the Lion system, and a check of all settings shows that they match the printout I made of the Lion settings.  I do not use iCloud for mail, so that server is disabled in Email Accounts, although the system opens iCloud on port 993 for Contacts, etc.
    Below is part of the output from the Doctor, which shows an error "503 wrong state for EHLO command" on ports 25 and 587.  Researching this message didn't really help me, and, as I say above, I have changed no settings between OS versions, so I assume that something must have changed with Mountain Lion.  Any help would be greatly appreciated.

    I'm getting the same behaviour with my ISP's mail server:
    INITIATING CONNECTION Nov 25 13:26:06.388  -- host:smtp1.bethere.co.uk -- port:25 -- socket:0x0 -- thread:0x7feac3893370
    CONNECTED Nov 25 13:26:06.577 [kCFStreamSocketSecurityLevelNone]  -- host:smtp1.bethere.co.uk -- port:25 -- socket:0x7feac3c23ae0 -- thread:0x7feac3893370
    READ Nov 25 13:26:06.799 [kCFStreamSocketSecurityLevelNone]  -- host:smtp1.bethere.co.uk -- port:25 -- socket:0x7feac3c23ae0 -- thread:0x7feac3893370
    220 april.london.02.net ESMTP Service ready
    WROTE Nov 25 13:26:07.031 [kCFStreamSocketSecurityLevelNone]  -- host:smtp1.bethere.co.uk -- port:25 -- socket:0x7feac3c23ae0 -- thread:0x7feac3893370
    EHLO pro.config
    READ Nov 25 13:26:07.268 [kCFStreamSocketSecurityLevelNone]  -- host:smtp1.bethere.co.uk -- port:25 -- socket:0x7feac3c23ae0 -- thread:0x7feac3893370
    250-april.london.02.net
    250-DSN
    250-8BITMIME
    250-PIPELINING
    250-HELP
    250-AUTH DIGEST-MD5 PLAIN
    250-DELIVERBY 300
    250 SIZE
    WROTE Nov 25 13:26:07.507 [kCFStreamSocketSecurityLevelNone]  -- host:smtp1.bethere.co.uk -- port:25 -- socket:0x7feac3c23ae0 -- thread:0x7feac3893370
    EHLO pro.config
    READ Nov 25 13:26:07.735 [kCFStreamSocketSecurityLevelNone]  -- host:smtp1.bethere.co.uk -- port:25 -- socket:0x7feac3c23ae0 -- thread:0x7feac3893370
    503 wrong state for EHLO command
    , investigating...

  • I can't send email after updating to iOS5

    After updating to iOS5 I am having a great deal of difficulty sending email, something that never happened before. When I hit "send" I get a message "The connection to the outgoing server "smtp-server.maine.rr.com" failed.  However the kicker is that after a period of a few minutes to a few hours, the message does go out.  Help!

    I would delete the mail account from your settings and re-add it. The problem is that the server data was somehow lost when your iPhone was upgraded.

  • Can't send email after updating to snow leopard with Mail

    I can still receive emails. SMTP settings were not changed.
    I can send with Entourage using the same settings.
    any help ?
    thanx in advance

    when I try to send I get the following message
    +Cannot send message using the server Skynet+
    +The sender address was rejected by the server relay.skynet.be.+
    +Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.+
    I have the same server settings on Entourage and it works
    none of the network settings were changed or firewall settings
    the problem started after upgrading to snow leopard
    iMac8,1, Intel Core 2 Duo, 2,8 GHz

  • Can't send mail after AirPort update

    After I installed the latest AirPort update, I can no longer send emails through Mac Mail but I can still receive them. I can send emails if I plug my MacBook directly into the cable service router through the ethernet port. According to my ISP (Cox), I have Mail configured to work properly. Is there a setting on the AirPort that I need to change?

    The error message says:
    "The sender address [my email address] was rejected by the server smtp.east.cox.net.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be delivered."
    There is only one server I can use. There is a button for the Connection Doctor, and that shows all green lights.

  • HT4623 How can I send email after changing my AOL password on my iPad2?

    After I changed my AOL password due to the latest spoofing scam, I cannot send any emails from my iPad2. I have gone to settings and changed my email password. The latest attempt to resolve this to go to the advanced page and I clicked on sent and now sent is no longer working. I think I've just made matters worse for myself. I can go to the AOL app and both receive and send emails, but I want to send directly from my iPad mail feature. Help!

    in settings, mail, go through the setting for sending again.  you need to restate your password.  make sure the server name and port are correct.  It may be simpler to delete the account and start over - ( you mail is still on the aol server - it will not be lost)
    If you are not real sure of the settings, simply google aol mail settings, and you should get a clear answer.
    since you are receiving, you have the right password in place  - you just need to reconnect to the sending server.

  • Can't send mail after security update

    Hello, I installed a security update friday night, and can no longer send email using either Mail 2.1 or Thunderbird. Both were working prior to the security update.
    I am not getting any error messages except for the ones over the phone that go..."did you get my email? What email?" In fact, both Mail and Thunderbird give every indication that the email was sent.
    I can mail myself a test from a web program, so my smtp server is working.
    I can receive mail fine.
    I am blaming the security update for this, but I have no idea where to look or what to do. Can I uninstall the update?

    You're welcome.
    The thing is, AFAIK Mail wouldn't put the message in the Sent mailbox unless it has received confirmation from the outgoing server that the message has indeed been sent, so it seems to me that the problem is not that messages are not being sent, but rather that they don't arrive at the destination for some reason.
    I bcc myself on every email for filing reasons and have
    not recieved one of my own emails since Friday night.
    Do you receive other mail normally? Have you checked for those messages on the web?
    I can log into my employers web tool and send email that way,
    so something is going on with my machine, whatever it is.
    Well, not necessarily. Maybe there is something wrong with the outgoing server you're using in Mail. Is this your only mail account? Do you have access to any other outgoing server that you could try?

Maybe you are looking for

  • Cash Flow Report

    What are the different ways or steps  to study SAP Standard Cash Flow statement? Actually My client want to check Working Capital Report Can I compare it with Cash Flow or not?

  • Monitoring CCM through SNMP

    Hello All. I am developing small application to retrieve information like ActivePhones. InActivePhones and etc from CCM using SNMP. It works fine for CCM v6. But in some cases(for example for CCM V3.3,V4.3) I got snmp error” No Such Name" during co

  • ACE Configuration (urgent)

    I am facing problem with ACE configuration. I want to redirect 443 traffic to my Proxy Server. But I am not able to do this. I want to redirect only subnet 192.168.80.0/24 I have the following configuration access-list BC line 8 extended permit tcp h

  • How to make an application scalable?

    Hello, Few years ago I have written a java application (J2SE) used to translate some requets from one protocol to another one (propriétary protocols). At that time, this applicaiton has been designed to process about 1000 requests per day. Now we wou

  • OSX 10.8.5 won't connect to Windows 2008 R2 NFS

    Hi We have about 25 Mac clients in our Microsoft Windows environment. OSX is bound to our single Active Directory domain and all our Windows server are 2008 R2. For several years we have been using SMB filesharing and connecting the Mac clients to ou