I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.

Similar Messages

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • I tried to follow the steps in recovery mode but itunes still can't detect it

    i tried to follow the steps in recovery mode but itunes still can't detect it.
    Ok ok. It did work the first time, however the phone got disconnected so then the phone turned itself on again.
    I tried to repeat the same steps again but it did not show the itunes logo. It just turned on and went to the lock screen.
    I did this for about 4-5 times. Each trial ending up with the same result.
    So what i did, once the phone was connected to itunes i clicked the update button and waited for HOURS to finish the update.
    It did restart and did whole other things. But it stopped and a black screen appeared with a text saying Iphone is disabled. Connect to iTunes.
    Any suggestions on what to do next? I'm seriously feeling so frustrated right now.
    So in case you didn't get it my phone was disabled after entering the wrong password too many times. Tried fixing it but it seemed to get worse.
    Really desperate here.

  • I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

    But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939.  Then how its become 3G.

  • I can't send out photos using I message on my iPad 3

    Can't send out photos using I massage on my ipad3 with ios6

    It depends on the type of e mail service you have.  If you have a pop account you cannot create new folders.   If you have an imap account, you can.  As an example, comcast.net are pop accounts.   Gmail.com  addresses are imap accounts and you can set up folders.
    If you are not sure what you have, put the pad in landscape and in the left side, touch the account button for your service.   You should see inbox, draft, delete and trash.  Look at the top.  If there is an edit button, touch it and you can add folders.  If the edit button is not there, you have a pop account and cannot add folders.

  • Can ACE send out email alerts for failed probes?

    hi guys:
    Can ACE send out email alerts to users if the probes failed?
    if no, is there any plan to put in this function in the future release?
    thanks a lot
    i know the work around is to set up the sys-log and configure the sys-log server to send out the mail.

    If there are no email alerts when a real server fails the probe and gets put out of rotation, how else will one know that the server is out of rotation.
    Is this feature in the GUI ANM software?
    John...

  • I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

    I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

    Hi troy157,
    I'm sorry you are having issues with the iMovie app you purchased for your iPhone5.
    The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if app finishes downloading/updating.
    Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
    If the issues persists, the article below will give you a few more troubleshooting steps:
    iOS: Troubleshooting applications purchased from the App Store
    Try the following steps to resolve your issue, testing the app after each step.
    1. Update your device software
    Update your device to the latest version of iOS.
    2. Check for app updates
    Ensure that your apps are up to date:
    Open the App Store and tap Updates. If updates are available, tap Update All.
    When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
    Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
    4. Restart the application
    If the issue affects only a single app, try closing just that app:
    Press the Home button to return to the Home screen.
    Double-tap the Home button to display recent apps.
    Tap and hold the affected app until the red minus appears.
    Tap the red minus to quit the app.
    Press the Home button, then restart the app.
    5. Restart your device
    Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.6. Reinstall the affected application
    Remove the application from your device and reinstall it.
    Touch and hold any application icon on the Home Screen until the icons start to wiggle.
    Tap the "x" in the corner of the application you want to delete.
    Tap Delete to remove the application and all of its data from your device.
    Press the Home button.
    Go to the App Store.
    Search for the application and then download it again.
    Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
    I hope this information helps ....
    Have a great day!
    - Judy

  • I don't have the up to date system requirements to run iCloud on my mac but would still like to access my email on my mac.  I think I need to update my settings, but am not sure what to do.  Can anyone help.  thanks

    I don't have the up to date system requirements to run iCloud on my mac but would still like to access my email on my mac.  I think I need to update my settings, but am not sure what to do.  Can anyone help.  thanks

    Welcome to the Apple Community.
    If you haven't done so already you need to migrate your mail account to iCloud first and do so IMMEDIATELY at the website Move
    Then
    Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Entering iCloud email settings manually in Tiger

  • How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

    How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

    If you are unable to empty the trash, try holding the Option key while selecting Empty Trash.
    Otherwise, some steps in the following link may help you.
    http://support.apple.com/kb/ht1526

  • HT201320 I have a new ipad mini - I am able to receive emails but not send - same with text. I have tried to follow the support advice. I have deleted my aol account and added it again. I have compared every setting with my husband, who has an ipad? Pleas

    I have a new ipad mini - I am able to receive emails but not send - same with text. I have tried to follow the support advice. I have deleted my aol account and added it again. I have compared every setting with my husband, who has an ipad? Please help

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

  • I can, I can't get my address book to snyc with my ipad2.  I'm using Outlook express 2004.  I followe the steps in itunes, but still no contacts.  Any suggestions?

    Can't get my address book to sync to IPAD2.  Using Outlook Express 2004.  I followed the steps in Itunes, but still not contacts.  Any suggestions?

    Mine is doing the exact same thing, and nobody on any of these threads has had any luck fixing it yet, so far as I can tell. iSync is worthless since it simply won't see the ipod and basically is not used at all now as .mac is done through its own preference window. What did work for me, and was quite easily done, was to just open your ipod through the finder and delete the vcard data in the contacts folder. Export your contacts from address book as a vcard to that contacts folder on your ipod, and it all works fine.
    Still won't sync...but at least this only takes a minute to do. I'd like to actually fix it though.

  • My aplle store id is disable! iremember the correct id and passord but is not working, i can acess my account but if i try to buy an application ,its says my account is disable

    my apple store id is disable! iremember the correct id and passord but is not working, i can acess my account but if i try to buy an application ,its says my account is disable

    It's real easy to create a new one and, in fact, it's too easy.  I say that because multiple IDs are a PIA.  The problem is that anything obtained from the iTunes Store is PERMANENTLY associated with the ID that was used to obtain the item(s).  iTunes items can not be transferred from one ID to another and IDs can not be merged.
    The problem arises when you want to update an app.  If you're doing it from iTunes on your computer, you must log out and back in to get to the correct ID.  Then you update and log out/in again to get back to where you started.  It's slightly easier if you update from the iPad/iPod device as there is no need to log out/in BUT you still need the correct password for the appropriate ID.  Of course, with a disabled ID, the problem is much worse!
    A replacement Apple ID makes sense ONLY if you wish to start out absolutely brand new with zero iTunes Store purchases.
    If you're really butting your head aginst a wall and you're reasonably close to an Apple Store, my suggestion is that you make an appointment with the resident "Genius" and get his/her help.
    One last thought...  If your brother actually got a human on the phone to dispute the charges, go there and explain the problem.  Of course, if Apple did not accept his explanation of what occurred, that could be the whole issue.  Apple believes that money is owed on the account!

  • I have forgotten my answers to the questions which are asked to identify me, and I am trying to press "send instructions to my e-mail", but this does not work, what should I do?

    I have forgotten my answers to the questions which are asked to identify me, and I am trying to press "send instructions to my e-mail", but this does not work, what should I do?

    If the email hasn't arrived after a few hours and isn't in a spam filter, you need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (113969)

  • I plug in my iPhone and this message showed. "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." I did this but still not working. Please advise

    I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
    Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
    Please advise what should I do to fix this.

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

Maybe you are looking for

  • How to display URL images and URL link (html) from Smartforms?

    Hi Gurus, I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the

  • IPhoto unable to order book

    Have been unable to order a book from iPhoto for about 2 months now. At first I put it down to the coupon offer overloading the servers, but still no joy after the coupon ended. The book assembles ok, but on transferring the data it doesn't get past

  • Yet another person who can't drag songs into a playlist

    I am following the directions to burn a CD. 1. Select new playlist; 2. Name the playlist; 3. Open the music icon; 4. Drag the songs to the new playlist. When I drag them to the new playlist (it is marked with a music note icon with a blue background)

  • Calendars not working right ever since I installed Mavericks??

    When I am in iCloud and looking at the Calendar icon, it says that I have 5 notifications (#5 is in a red circle) but when I go to view them, I have none.  The # then disappears, but after a few minutes, it comes right back.  What should I do to reso

  • Failure while loading into cube

    I am doing loading into Headcount cube on daily basis through a process chain from two different datasources.  The system is 3.5 But it fails while loading and it ends up with dump in ST22 with the exception ADD_PARTITION_FAILED. Can anybody help reg