I can't sequence more than 24 hours of footage in Adobe Premiere Pro

I'm trying to put together 25 (full) days worth of video in Premiere Pro. Is this even possible? I can't get anything past 24 hours to sequence together.
Thanks!!

I would load a clip into the Source Monitor, pick the first frame you want to use, press Shift+E (Mac) or Ctrl+Shift+E (Win) to Export Frame, then on the NumPad, type +80000 and press NumPad's Enter key to jump forward. Then repeat until you reach end of clip. If there's a way to automate this, I'm not aware of it.
Note that to amass enough frames for 3 minutes @ 30fps, you'll have to do this 5400 times (30x60x3); 2 minutes at 24fps = a mere 2880 reps. And once you're finished grabbing all the stills, if you want to import them as a frame sequence, you'll need to batch rename them with the same base name and an incrementing number. The challenge there will be to make sure all the images are in the right order before batch renaming in Bridge.
To me, this seems like a painful approach.

Similar Messages

Can't burn more than 2 hours using DVDSP 4

I am having trouble burning my project to a DVD. I have created 2 Quicktime.dv movies, in iMovie, that are approximately 1 hour 10 minutes each. I have taken the bitrate, in Preferences, all the way down to 2.0, using One Pass, and all I get is the message that says there is not enough space on the output media. What am I missing that I can't fit both of these movies on one 4.7 gig DVD blank?
Thank you.
G5 2GHz Dual Mac OS X (10.3.9) DVDSP 4.02

Hi james - welcome to the discussions.
One reason for this error is that your hard drive is getting full. before DVDSP writes to disc it creates a copy of the build files in a location you specify. Have you got enough room on your drive?
The second thing to try is to encode these movies before you bring them in to DVDSP - this will give you a far more accurate idea of the file sizes you are dealing with. You should certainly be able to get your project onto a DVD-R with such a low bitrate, but you are likely to lose quality doing so. You can also afford to raise that bitrate slightly. If you encode the audio to AC3 you will free even more room for the video and you could get away with 2.5 as a setting... still woefully low for DV material.
Your options are therefore to either use DL DVD-R, or encode using MPEG1, or encode using MPEG2 at Half D1 resolution.

Idvd6 more than 1 hour of footage to burn

is there a way to put one and a half hours onto a dvd with iDVD?

Hi ormonde:
Yes-you can put up to 2 hours on one DVD-R...use Best Quality
iDVD: How Much Video Can I Put on a DVD-R Disc?
http://docs.info.apple.com/article.html?artnum=93330
Sue

Can you use more than one computer to edit the same Premiere Elements Project?

I am using Premiere Elements 10. I have built a new project on my desktop computer because the desktop has a firewire port to capture video from my camcorder and my laptop doesn't have a firewire port. The project is stored on my home network. I seem to be able to do editing fine using the desktop computer that the project was created on, but it won't load up right on the laptop for editing. Premiere Elements is configured the same on both computers. I guess my question is - does Premiere Elements store something on on the computer that the project was created on that is not being stored on the network drive? How can I fix the problem so that I can edit on my laptop? The laptop is a top of the line Dell XPS with an i7 processor that I use for other Premiere projects, so the laptops ability is not an issue.
Thanks
Bill

Yes, having files stored on a HDD, but having the letter change between machines is a problem. The Project file (PREL) is only an XML database, with links to the Assets. Those links are Absolute Paths, so if anything changes, from drive letter, to file name, the link is broken.
I have over a dozen externals, that I use to migrate Projects between my main two computers. Each has had its drive letter set in OS of each computer. I started with Z:\ and worked down. Each drive has a lable on it with the designated drive letter. Unfortunately, I ran out of letters, as the workstation has a ton of HDD's and burners, so I had to start over. That does mean that I cannot have both Z:\ drives plugged in at the same time, but that has never been an issue. I wish that Windows would allow for double drive letters, say ZZ:\, but still, I have a handful of letters to use - just too many externals for those letters...
Happy editing,
Hunt

PP 2.0: can't render more than a two-hour video

I have an AVI file (34 gig) that I'm rendering into an MPEG4 file. The original is 2 hours and 45 minutes long. However, when I render it, the MPEG4 version truncates at roughly 1 hour and 55 minutes in.
I have no idea why this happens: I've specified rendering the full project (it's just the one clip), and specifying a work area that's 2h50m long.
I _suspect_ that it may be disk space; the original AVI is 34 gig, I have about 26 gig free on the hard drive, and the final MPEG4 can't be more than six gig or so. And Premiere doesn't give me any "out of disk space" errors. So I'm stumped.

I have about 26 gig free on the hard drive
I'd definitely say that Harm is right on this one. Besides the MPEG file, PrPro needs to create some working files too. Actually, if you are going to a muxed file, it will also do yours as two files (Audio & Video) and then "join" them for the final.
You need much more space, than just for your resultant file.
I use externals for portability between machines. For me, the FW-800's work well, and I have their drive letters set in the OS of each machine. Though not the ideal setup for speed, and ease of editing, I have each Project contained, with Scratch Disks on the external. Again, to stress, this is NOT the ideal allocation of HDD's for editing, but allows me to whisk an external upstairs, and all is contained. I live with the performance hit incurred with this scheme.
I do agree with Harm also on the eSATA 7200RPM. To use FW-800, you'll incur about the same expenses, as the eSATA, and it WILL be better and faster. I have tried FW-400 HDD's, and found them to be so horribly slow. I could not stand the wait, so relegated those to archival storage only. Still, if one gets your Project done (just be very patient), the FW-400 should work. I found earlier on that USB just had too many issues, as well as slowness. I would strongly recommend against going USB, if at all possible.
Good luck, and start shopping for two more internals. They are getting cheaper by the week.
Hunt

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

HT1386 Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. J

Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>

Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?

Can we declare more than one sequence tags in a complex type?

Hi all,
Can we use more than one <sequence> tags in the xml schema?
<xs:complexType name="Demo">
<xs:sequence minoccurs = "1" maxoccurs = "1">
</xs:sequence>
<xs:sequence minoccurs = "0" maxoccurs = "1">
</xs:sequence>
</xs:complexType>
If you observe the above sample xml there are two sequences in one complex type with different values for minoccurs and maxoccurs. Is this xml valid? why I need this is I have an
XML with lot of elements some of them should have minoccurs = "1" maxoccurs = "1" and some other should have the other combination of min and max attributes. I want to
declare it in the sequence rather than declaring beside each individual element. is that possible?
Thanks.

Hi,
Is this xml valid? No, a complexType expects only one child, but you can do this :
<xs:complexType name="Demo">
<xs:sequence>
    <xs:sequence minOccurs = "1" maxOccurs = "1">
    </xs:sequence>
    <xs:sequence minOccurs = "0" maxOccurs = "1">
    </xs:sequence>
</xs:sequence>
</xs:complexType>However...
XML with lot of elements some of them should have minoccurs = "1" maxoccurs = "1" and some other should have the other combination of min and max attributes.
I want to declare it in the sequence rather than declaring beside each individual element. is that possible?minOccurs and maxOccurs declared in the sequence apply to the sequence as a whole, not to its individual components.
For example :
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
     <xs:complexType name="Demo">
          <xs:sequence>
               <xs:sequence maxOccurs="1" minOccurs="1">
                    <xs:element name="test1" type="xs:string"/>
                    <xs:element name="test2" type="xs:string"/>
               </xs:sequence>
               <xs:sequence maxOccurs="1" minOccurs="0">
                    <xs:element name="test3" type="xs:string"/>
                    <xs:element name="test4" type="xs:string"/>
               </xs:sequence>
          </xs:sequence>
     </xs:complexType>
     <xs:element name="root" type="Demo"/>
</xs:schema>What you expect will work for the first sequence of elements (test1 and test2) but anyway minOccurs and maxOccurs for elements default to 1, so why bother wrapping them in a sequence?
If I understand what you want correctly, it won't work for the second sequence.
For instance, this will be valid :
<root>
<test1/>
<test2/>
<test3/>
<test4/>
</root>but this will not :
<root>
<test1/>
<test2/>
<test3/>
</root>

Syncing my iPad is taking more than 36 hours... how do I speed this upso I can update my iOS?

syncing my iPad is taking more than 36 hours... how do I speed this up so I can update my iOS?

Try restarting the iPad. Disconnect the iPad first.
Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
Restart your PC.
Try again.

Can some body help me? yesterday I format my iphone and it have been more than 24 hours a litlle circle moving

can some body help me? yesterday I format my iphone and it have been more than 24 hours a litlle circle moving

Reset, hold both the Home and Power buttons for about 10 seconds until the iPhone begins to start. If still problem, and your decide to Restore your iPhone, try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

HT4463 I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

Mac App Store: How to resume interrupted downloads
http://support.apple.com/kb/HT4485

140063685933 this is the receipt no Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me Haw unprofessional is that and more than an hour can't find how to get to custom

140063685933 this is the receipt no
Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me
Haw unprofessional is that and more than an hour can't find how to get to customer service to correct the mistake
Just so fed up will never ever pitches anything waiting of time and money

Apple is not here. Apple does not answer questions here. There are only volunteer users here.
The charge to your credit card takes place before you download the app.
If you are having problems downloading the apps that you bought, you will need to explain the issue in detail if you wish someone to help you.

My 21" display on iMac (mid 2010) is overheating so much I can't sit at my computer for more than an hour or so. Also, some shadowy shapes appear in the background on the upper left of the screen.

Processor 3.06 GHz Intel Core i3
Memory 12 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5 (11G63)
iMac 21" display
My 21" display on iMac (mid 2010) is overheating so much I can't sit at my computer for more than an hour or so. Very hot. Also, some shadowy shapes appear in the background on the upper left of the screen. Any thoughts?

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

I tried to erase and reset my iphone4 but its more than 8 hours just hanging, nothing is happening, can someone help please?

I tried to erase and reset my iphone4 but its more than 8 hours just hanging, nothing is happening, can someone help please?

unplug the iphone from you computer.
quit itunes.
re-open itunes.
connect iphone
quickly begin to hold down both home button and sleep/wake for around 7/8 seconds.
as soon as the iphone screen goes black release finger from sleep/wake button but continue to hold home button.
an apple logo should appear on the iphone screen
continue to hold down home button
itunes should now let you know it has detected a phone in recovery mode.
choose to restore iphone.
once completed restore from back up if desired.

I turn off my whats app lasseen time stamp more than 24 hours ago and now i can't turn it on it sees " could not connect to whats app services please try again latter" i try deleting the app and changing the calendar and still didnt worrk

I turn off my whats app lasseen time stamp more than 24 hours ago and now i can't turn it on it sees " could not connect to whats app services please try again latter" i try deleting the app and changing the calendar and still didnt worrk

Ok - an update ...
Managed to get the phone to backup to iCloud, so decided to risk the "Factory" reset.
Took the reset option including delete all data and crossed fingers.
It took a while to resotre from iCloud, but everthing seems to be back and ...
Bluetooth now working agaim.
Backup to Computer working again.
And somewhat to my surprise, GMail in the mail app is working again. (The surprise being that the implication of other posts was that this was a 6.1.3 fundamental bug)
Still no idea why the iPhone was corrupted - but at least the "Factory" reset seems to have recovered the situation.

I can't sequence more than 24 hours of footage in Adobe Premiere Pro

Similar Messages

Maybe you are looking for