I can't set up my time capsule - please help!

I can't seem to set up my Time Capsule at all since I switched Internet providers to Virgin. Whenever I try to it says that the network password is not correct but I KNOW it is. I've tried it wired via Ethernet with the wireless turned off but still it does nothing. Has anybody got a link to an absolute fail proof guide to setting it up. I've had a Time Capsule before that worked fine.
Thanks

LaPastenague is correct in saying you need to setup the Time Capsule in bridge mode. It sounds like you are using a modem router combo.
Just get a regular ethernet cable(same as a "patch cable") and connect it from the LAN port on the modem to the WAN port on the Time Capsule. Go through the setup as normal and if it asks you to put it in bridge mode do so. (if you are using Mac OS X 10.6.8 or earlier it will prompt you for it. If you are using a Mac OS X 10.7.5 or later it will automatically put it into bridge mode if it is receiving a private ip address).
To verify bridge mode:
10.6.8 or Earlier: Airport Utility > Select Time capsule > Manaul Setup > Internet Icon Along the top > Internet Connection Tab > Connection Sharing. If it says "Share a Public IP" Switch it to Off(Bridge Mode)
10.7.5 or Later: Airport Utility > Click on the Time Capsule > In the window to the right of it click "Edit" > Network Tab > Router Mode. If it says "DHCP and NAT" switch it to Off(Bridge Mode)
Hope this simplifies things....
Jesse

Similar Messages

Can i set up my Time Capsule 1st generation with airport 5.5.3?

can i set up my Time Capsule 1st generation with airport 5.5.3?

Yes, if you are asking about AirPort Utility 5.5.3 for Windows.....and you are running XP SP3 on your PC.
AirPort Utility 5.5.3 for Windows
If you are running XP SP2 on the PC, then you will need to use AirPort Utility 5.4.2 for Windows
AirPort Utility 5.4.2 for Windows

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Bought lots of music last night. Tried to sync my 5th generation nano.It's been saying something like, "step two, attempting to sync a***'s ipod for about 8 hours. It won't let me stop it. I can't disconnect at this time. Please help.

Bought lots of music last night. Tried to sync my 5th generation nano.It's been saying something like, "step two, attempting to sync a***'s ipod for about 8 hours. It won't let me stop it. I can't disconnect at this time. Please help.I thought about using control. alt delete and stopping it. It says I will lose any unsaved data. The music appears to be in my library, so I should be safe, right? However even if that works and I can disconnect my ipod, why isn't it syncing? I have a 2nd one to sync as well. I am frustrated. Thank you!

Thanks you for replying planb77! My husband got home and told me to just disconnect the ipod. It had been at least 12 hours by then, The music was in my library but not on my ipod, He had me shut down, unplug my computer, take a rest from it and restart. I reset my ipod following instructions on the itunes site. I tried syncing again and was successful syncing both ipods. I really think it was great of you to take the time to help someone else.

How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Time Capsule please help

Hi,
I have just set up my time capsule, after quite a few drama's. It's seems to be finally working.
The only thing is that when I search the content on the TC, it shows that the storage space has been used but I can find all the info.
When i search the pictures I had on the mac no content is shown in the TC. Am I doing something wrong? Or do I have reset the TC to factory settings and set it up again?
Also I have to upgrade my operating system to install an application and I have been advised that I should do a clean install. Will I have access to the content on the TC with out restoring the info back to the mac?
Sorry abould all the questions, I am new to all this.
Thanks

When i search the pictures I had on the mac no content is shown in the TC.
If you are asking about the iPhoto library, Apple removed the feature that allows you to "browse" the backup library in Time Machine some time ago. You have to "Restore" the entire library to another destination....like your Mac's desktop....and then pick out the individual images that you need.
See this excellent support document....the pink box.....from Time Machine guru Pondini for more info on iPhoto.
http://pondini.org/TM/15.html
Sorry, I have not ever done a "clean" install when upgrading the operating system.....(this sounds more like Windows).....so cannot help on that one. If you elect to do a clean install, Time Machine will likely view your Mac as another "new" Mac and backup the entire contents of the Mac on the first backup that runs.

How can we set up a Time Capsule to run on a Verizon FIOS network that's already set up with its own router?

We have a Time Capsule that we want to use STRICTLY as a backup device and not as a router, which the setup system seems to want to do. We can't get beyond the option to switch the device to a new network, which we fear will disconnect a vital Internet connection. Any ideas?

Once you click Update at the end of the configuration process in AirPort Utility, the TC light should turn green in 25-30 seconds.
Close AirPort Utility as soon as you see the message that the settings have been stored to the TC as the TC will "disappear" from the AirPort Utility window.
Once you have a green light on the TC, if you need to access the settings again on the TC, you can do so be temporarily connecting an Ethernet cable from your computer to one of the other LAN ports on the TC. Open AirPort Utility and the TC will appear.
If you don't plan to use the wireless on the TC to provide another network, it would be a good idea to turn it off to help prevent wireless interference issues with the other wireless network.
To do this....open AirPort Utility and click Manual Setup
Click the Wireless tab below the icon
Change the setting for Wireless Mode to "Off"
Update to save the changes

I can't set up my Time Capsule

I bought a time capsule to set up as an external hard drive and a wireless repeater for my mac, in a household where everyone else is using a PC and there is an "untouchable router" that provides wireless internet.
Everytime I try to set up the Capsule to feed off of the wireless internet at home I fail miserably.
Can someone please walk me through it?

Hi, Ghiato.
Sorry for the long reply delay... gotta work sometime.
So I looked around a little more and found a couple discussions asking the same question... Can the TC be used as a backup drive only? And the answer seems to be yes. We just have to figure out how to add your TC to the network you already have.
What do we know about your current wireless network... the one your iMac and the PCs join now?
With your iMac connected to your existing wifi network, go to System Preferences > Network, then select the Wi-Fi connection in the left-hand panel and let's find out these things...
• What Location setting is selected? Is it Automatic, or something other?
• What is the IP address of your iMac when it's connected? Is it 192.168.xxx.xxx or 10.0.xxx.xxx?
Ask you PC network person about your wifi network.
• Is it the D-Link router that the PCs connect to? Is that the router you have to restart after the TC tries to connect?
• Also, you will need to know your current wifi network name and password - BUT DO NOT post those in this discussion... just keep them handy.
• And for my own curiosity, what part does the EnGenius router play in your network?
All are important to know as we try to get your TC to play nice.
And you should also reassure your PC network people that they don't have to be afraid of the Apple stuff. I've actually found that when starting from scratch, an Apple network is much easier to setup than any PC net.

How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
Thanks!

The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

How can I set up my time capsule when I don't have access to our building's wireless router?

Our apartment includes internet but we do not have access to the router. We only want to use the time capsule to back-up our computer not as a wireless router. We have tried setting it up but the light flashes amber and it cannot set-up.

Cannot by ethernet for the first setup..put the TC in bridge mode and it should work fine.. There are a lot cheaper solutions to do this than a TC though.

I need assistance setting up my time capsule please.

Can't setup my time capsule. Keep getting blinking amber light which means not connected to the internet.

We can likely help, but we will need to gather more information before we can begin to start the troubleshooting process. Things like.....
1) What device that you have the Time Capsule connected to.........in other words, the make and model number of your modem....or....it might be a modem/router combination device as well.
2) We assume that you have the Time Capsule connected to the modem with an Ethernet cable. Would that be correct? Have you verified that the Ethernet cable itself is working correctly?
3) What operating system are you using on your computer to configure the Time Capsule?
If you have a Mac, and are not sure, click the Apple icon in the upper left corner of the screen, then click on About This Mac and post back with the OS X version number that you see there.

Time Machine getting real-only error on 2TB Time Capsule --- Please Help

Hi,
My MacPro is running 10.6.2. I bought a 2TB Time Capsule on August 1st, 2009. The TC has been running okay, but painfully slow. On Tuesday, Nov 24th, 2009, the Time Machine reported that the TC is read-only now. I've spent 5 days, including Thanksgiving Day, researching and trying to resolve this problem. To my surprise this problem goes back several years.
I have tried all the solutions without success. I cannot afford to lose the sparse bundle on TC --- it's 1.56TB in size.
My home/office LAN includes a Linksys BEFSR81 Router, 2TB Time Capsule, an iMac G5, and my MacPro. That's all there is. The router is connect to the Internet through a Comcast Cable.
The TC was configured using the Airport Utility. The password is set at the TC level. The password is also set "Guests" (something I found in my research). Wireless is turned off because I'm using an Ethernet LAN.
Now the following is very Strange!!!
(1) Click on MacPro in the side bar. The Data disk is shown with a "lock" in the icon. It has only one permission: Everyone "No Access". I'm unable to change the permission.
(2) Click on the boot drive and make invisible files visible. Expand Volumes. Get Indo on the Data "folder". The permissions are:
everyone - read/write
don (Me) - read/write
admin - read/write
everyone - read only
There are 2 "everyone" entries!!! I can't remove either of them. I wonder if the second "everyone" is the problem?
Does anyone have any suggestions how to fix this read-only problem?
Is there a bug in the firmware? My TC version is 7.4.2.
Please help!
Thank you,
Don Leckie

Disk Utility didn't report any errors. I checked the log too.
The disk "Data" in TimeCapsule can be opened using the Finder.
The sparsebundle for the MacPro can be opened and each backup folder is accessible and can be written to. But TimeMachine still says that the TimeCapsule is read-only.
The sparsebundle for the iMac G5 cannot be opened from the Finder. The error message is that I don't have sufficient privileges. Trying from both the MacPro and iMac G5. TimeMachine still says the TimeCapsule is read-only.
I tried using fsck_hfs to try fixing the permissions. But I got the message that the disk Data was not a character device; whatever that implies.
Tomorrow I'm putting a call into Apple Support.
Thank you for your help!

I can't set up my Time Capsule, what can I do?

The problem is that Airport Utilility doesn't recognize the device.

Use ethernet for intiial setup.. wireless is useless.
Plug it directly into the computer.. press and hold reset until the front led flashes and then do the setup.
You do not need the TC in the network to do this..

'You shut down the computer because of a problem'. Mbp constant black screen crashing, can only hard reboot each time. Please help, latest report here...

Hi for the last few months my mbp seems to randomly crashing to black screen at seemingly unrelated times. Most frequent are after periods of sleep and sometimes when web pages such as youtube load. This crashing is getting more and more frequent and when it occurs only a hard reset with the power button has any effect. The screen goes completely black, no backlight, no keys work, the fans keep going and if there was a song/video playing it starts looping the last note/second of noise over and over until the laptop is reset. My worry is that if i take it to the apple store, it will decide not to crash on that day which would drive me insane as its been happening all the time.
I've sent lots of 'reports' off to apple and saved numerous panic reports, here is the latest one:
Interval Since Last Panic Report: 109511 sec
Panics Since Last Report:          4
Anonymous UUID:                    83E37560-8776-403F-9196-2DE4E7ED912C
Thu Jan 8 00:30:35 2015
panic(cpu 1 caller 0x9d4c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7f369000 0x0a5480a2, D0, P2/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x4e6ea188 : 0x21b837 (0x5dd7fc 0x4e6ea1bc 0x223ce1 0x0)
0x4e6ea1d8 : 0x9d4c9b (0xbea28c 0xc5a800 0xbf8e60 0x0)
0x4e6ea278 : 0xaef608 (0x97f7404 0x9b5d004 0x100 0xcb42b6)
0x4e6ea2c8 : 0xae6601 (0x9b5d004 0x100 0x4e6ea2f8 0x9c4778)
0x4e6ea2f8 : 0x16c89a6 (0x9b5d004 0x100 0x438004ee 0x4e6ea308)
0x4e6ea438 : 0xb0e2b5 (0x9b5d004 0xaa45004 0x0 0x0)
0x4e6ea478 : 0x9dde7c (0x9b5d004 0xaa45004 0x0 0x0)
0x4e6ea518 : 0x9da55b (0x0 0x9 0x0 0x0)
0x4e6ea6c8 : 0x9dc58f (0x0 0x600d600d 0x702b 0x4e6ea6f8)
0x4e6ea798 : 0xc9feae (0xc1d0004a 0xbfef0033 0xbfef0034 0x857c)
0x4e6ea808 : 0xcaf734 (0xaeae400 0x983ea80 0x8 0x3)
0x4e6ea828 : 0xcd4322 (0x983ea80 0xb 0x4e6ea848 0x2345f4)
0x4e6ea858 : 0xcd4b3d (0xabcf000 0x0 0x4e6ea87c 0x0)
0x4e6ea888 : 0xcb4d79 (0xabcf000 0x7d729080 0x0 0x0)
0x4e6ea8d8 : 0xc76d0c (0x462af000 0x0 0x0 0x3)
0x4e6ea948 : 0xc7640f (0x462af000 0x0 0x2 0x3)
0x4e6ea978 : 0xc6c05f (0x462af000 0x0 0x2 0x4653a000)
0x4e6eaab8 : 0xca55d8 (0x4653a000 0x1 0x4e6eabcc 0x4e6eabc8)
0x4e6eab68 : 0xc67fe1 (0x4653a000 0x1 0x4e6eabcc 0x4e6eabc8)
0x4e6eabe8 : 0x56da06 (0x4653a000 0x0 0x4e6eae3c 0x4e6eac74)
0x4e6eac38 : 0x56e2a5 (0xcf6720 0x4653a000 0xa725088 0x1)
0x4e6eac88 : 0x56eb59 (0x4653a000 0x10 0x4e6eacd0 0x0)
0x4e6eada8 : 0x286638 (0x4653a000 0x10 0xa725088 0x1)
0x4e6ebe58 : 0x21dbe5 (0xa725060 0xbc195a0 0x1fd7e8 0x5d43)
0x4e6ebe98 : 0x210a86 (0xa725000 0x0 0xa9ec6c0 0xac6fce0)
0x4e6ebef8 : 0x216f84 (0xa725000 0x0 0x0 0x0)
0x4e6ebf78 : 0x295c57 (0x97d72e8 0x0 0x0 0x0)
0x4e6ebfc8 : 0x2a256d (0x97d72e4 0x1 0x10 0x97d44c4)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0xc5c000->0xd12fff
            dependency: com.apple.NVDAResman(6.4.0)@0x96e000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
         com.apple.nvidia.nv50hal(6.4.0)@0x1592000->0x19a6fff
            dependency: com.apple.NVDAResman(6.4.0)@0x96e000
         com.apple.NVDAResman(6.4.0)@0x96e000->0xc5bfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
BSD process name corresponding to current thread: WindowServer
Mac OS
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 465.76 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 4
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3
------------end----------
Any information on why this is happening would be so so so appreciated as losing all your work in a blink of an eye is unbelievably rage inducing.
Thank you!

You have the MacBookPro6,2—the Edsel of Macs. It may have the logic-board defect that was covered by a recall program that has now ended.
Residents of the EU may be entitled to warranty service for up to six years after purchase.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers do not detect the fault. There is a specific test for this issue that Apple calls "VST" (for "Video Switching Test.") Ask for it. A "Failed" result means that the fault is present.
You may be quoted a price of about $300 (in the U.S.) for a "depot repair," which involves shipping the unit to a central repair facility and takes about two weeks. For that flat fee, anything found wrong with it should be fixed, not just the logic board.
Sometimes the replacement part is also defective, so be prepared for that possibility. If you decide to pay for a new logic board, test thoroughly during the 90-day warranty period on the repair. Some owners have reported that they went through as many as three replacement boards before getting one that worked.
If you don't want to pay for the repair, you may (or may not) be able to stop the panics by disabling automatic graphics switching. To use the discrete graphics processor, you'll need a third-party utility to switch to it manually.
Often the problems start after an OS upgrade. If the upgrade was recent, and you have backups, then you can revert to a previous OS X version.

I can't use my face time. Please help!

I have and an iPad mini and an iPod 4th generation. Both should be able to use FaceTime and I was using it till last 2 days. The interesting thing is that sometimes I'm still able to use it however if I finish my call I can't make it again. And if I do it just happens randomly. Both from iPod and iPad. I did all of the troubleshooting couple times but it doesn't help. I would really appreciate your help if you know what is going on with my FaceTime

You will need to get it repaired.

I can't set up my time capsule - please help!

Similar Messages

Maybe you are looking for